| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark NULL kptr stores precise
check_map_kptr_access() permits a scalar store into an untrusted kptr
field only when the register is known to contain zero. Unlike other
verifier checks whose outcome depends on a scalar value, it does not mark
that register precise.
A state checkpoint reached with an imprecise zero can therefore prune a
second path that reaches the store with an arbitrary nonzero scalar. The
program can write attacker-controlled bits into the kptr field and load
them back as a PTR_TO_BTF_ID.
Call mark_chain_precision() before accepting a known-zero register. This
forces state equivalence to compare its scalar range and makes the verifier
visit and reject a path carrying a nonzero value. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Cancel special fields when recycling rhtab elements
rhtab_map_update_existing() and rhtab_delete_elem() call
bpf_obj_free_fields() when replacing or deleting a value. These map
operations can run from BPF programs in NMI context, where releasing a
referenced kptr or another complex field is not generally safe.
Array and hash maps avoid that problem by cancelling only the asynchronous
fields which can be stopped safely in the caller context. Other ownership
state remains attached to the allocation until its memory allocator
destructor performs the final cleanup.
Use bpf_obj_cancel_fields() for the corresponding rhtab paths as well. This
cancels timers, workqueues, and task work while allowing rhtab_mem_dtor() to
release referenced kptrs when the allocation is eventually destroyed.
[ kkd: Rebased, used direct helper calls, and rewrote the commit log ] |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Preserve special fields in recycled rhtab elements
rhtab_map_update_elem() initializes special fields after obtaining an
element from bpf_mem_cache_alloc(). The allocator can return a fresh,
zeroed unit, or recycle one from its RCU-pending lists before the
registered destructor has run.
A BPF program can retain a map-value pointer after deleting its element
and initialize and arm a timer through that pointer. If the deleted unit
is recycled, check_and_init_map_value() clears the only pointer to the
timer. Neither a later deletion nor rhtab_mem_dtor() can then cancel it,
and the callback can run with its key and value pointing into freed memory.
Do not reinitialize special fields on insertion. Fresh allocator units are
already zeroed. For recycled units, the special fields are ownership state
that must remain visible to the eventual destructor. copy_map_value()
already skips those fields, matching the non-preallocated hash-map path and
the lifecycle established by commit 275c30bcee66 ("bpf: Don't reinit map
value in prealloc_lru_pop").
[ kkd: Split out the fix and rewrote the commit log ] |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Don't resurrect a scalar id dropped by collect_linked_regs()
check_cond_jmp_op() copies the compared registers into
env->{false,true}_reg{1,2} before collect_linked_regs() runs and copies
those snapshots back into both branch states afterwards.
collect_linked_regs() records at most LINKED_REGS_MAX members of a
linked registers group in the jump history and calls clear_scalar_id()
for every member that does not fit. The compared register is not exempt
from that.
As a consequence, sync_linked_regs() might adjust ranges for more
registers than bpf_bt_sync_linked_regs() can propagate precision to.
Collect the linked registers before the snapshots are taken instead.
This might lead to some unnecessary clear_scalar_id's, but from
previous testing situations with many linked registers are
extremely rare. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark bpf_btf_find_by_name_kind() as sleepable
When bpf_btf_find_by_name_kind() finds a type in module BTF, it
returns a new BTF object fd through __btf_new_fd(). This reaches
anon_inode_getfd(), which can sleep while allocating or expanding the
current task fd table.
The helper prototype does not set might_sleep, so the verifier allows
the helper in non-sleepable contexts such as BPF timer callbacks. The
fd allocation can then sleep in softirq context and install the fd into
the interrupted task.
Mark the helper as sleepable. This preserves calls from the main body
of a sleepable syscall program while rejecting calls from its
non-sleepable regions. |
| IBM DataStage on Cloud Pak for Data 5.4.0.0 could allow a remote authenticated attacker to obtain sensitive information due to improper validation of the X-Forwarded-Proto header. |
| IBM DataStage on Cloud Pak for Data 5.4.0.0 could allow a remote authenticated attacker to traverse directories on the system due to improper limitation of a pathname to a restricted directory. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_owner: use memcg_data snapshot to avoid TOCTOU in print_page_owner_memcg()
print_page_owner_memcg() reads page->memcg_data via READ_ONCE() at the
start to guard against tail pages and NULL data. However, it later
re-reads page->memcg_data locklessly in two places:
1: page_memcg_check(page)
2: PageMemcgKmem(page) (via folio_memcg_kmem(), which includes
VM_BUG_ON assertions for tail pages and MEMCG_DATA_OBJEXTS)
If the page is concurrently freed and reallocated as a THP tail page or
slab page between these calls, the VM_BUG_ON assertions can trigger on
CONFIG_DEBUG_VM=y builds, crashing the kernel.
Fix both TOCTOU issues by using the memcg_data snapshot throughout. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: validate sta_id in BA window status notif
BA_WINDOW_STATUS_NOTIFICATION_ID extracts a 5-bit sta_id from the
firmware notification and uses it to index fw_id_to_mac_id[] without
bounds checking. Validate sta_id before array access to prevent
out-of-bounds indexing. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: zero-initialize stack-allocated cifs_open_info_data
Stack-allocated cifs_open_info_data may contain random data.
This can make some fields have wrong value if they are not set later. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check ancestor frames for rbtree callbacks
bpf_rbtree_add() invokes its comparator while the caller holds the root
lock. The native insertion code retains raw parent and link pointers across
the callback, so the verifier prohibits unlocking, consuming tree nodes,
or changing RCU state from that callback.
in_rbtree_lock_required_cb() only checks the innermost verifier frame.
Static subprogram calls are permitted while holding a spin lock, and such a
call pushes a frame without in_callback_fn set. Consequently, all callback
restrictions disappear in the nested frame. The subprogram can unlock the
tree, remove and drop the node being compared, then relock. Native insertion
resumes with the stale parent pointer and links freed memory into the tree.
Walk all active frames for the rbtree callback instead. Benign static
subprograms remain permitted, while callback restrictions follow execution
into nested frames. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: don't rewrite bpf_fastcall patterns entered by a jump
mark_fastcall_pattern_for_call() must ensure that matched
"spill; call; fill" instruction series is not interrupted by a jump.
Otherwise the rewrite applied by bpf_remove_fastcall_spills_fills()
is not sound.
Record the instructions targeted by jumps in
insn_aux_data[*].jump_target when the CFG is built and use this flag
to stop growing a pattern at such an instruction. Jumps to the first
spill are fine.
Note that existing insn_aux_data[*].jmp_point field can't be reused,
as it marks subprogram return instructions. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmasp: fix tx_spb_ring_full() checking same slot cnt times
The loop initialised next_index from intf->tx_spb_index on every
iteration, so incr_ring() always produced the same result and only
one slot was ever tested. Move the initialisation before the loop
so each iteration advances next_index and the function correctly
checks that cnt consecutive descriptor slots are available before
allowing a new transmission. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmasp: clear txcb->last before writing each descriptor
bcmasp_xmit() only wrote txcb->last = true for the final fragment
of an SKB; non-final fragments left the field untouched. If a
descriptor slot was reused while it still held a stale true from
a previous SKB (possible when tx_spb_ring_full() underreported
fullness), bcmasp_tx_reclaim() would see last == true mid-SKB and
call dev_consume_skb_any() prematurely, freeing the sk_buff while
its remaining fragments were still in flight.
Unconditionally clear txcb->last before the conditional set so every
descriptor slot starts from a known false state regardless of what a
prior transmission left behind. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: avs: Refactor and fix init_config access
Existing code accesses enties found in ->init_configs array through
indexes that are part of ->config_ids array. Those two are limited by:
->num_init_configs and ->num_config_ids respectively. Using ID larger
or equal to ->num_init_configs leads to out-of-bounds access:
avs_path_module_send_init_configs()
loop:
(...) &acomp->tplg->init_configs[ids[i]]
^ out-of-bounds candidate
Rather than adding another if-statement, refactor the code. There is no
need to store the IDs, have a list of pointers to actual config-entries
instead. As the verification of ->init_config entries does not differ from
verification of other types that are part of the topology.c file, simply
reuse the code. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: avs: Fix unbalanced module reference count
strace_open() invokes try_module_get() which on success takes
the module reference. If any follow up operation causes
strace_open() to fail, the refcount shall be put down. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: remove stale namespaces by NSID range during scan
nvme_scan_ns_list() drops the stale namespaces in each gap in the
reported NSID list one NSID at a time. Every iteration calls
nvme_find_get_ns() to look the namespace up and removes it if it is
present. The loop runs once per NSID in the gap rather than once per
namespace actually present.
NSIDs are 32-bit, so a target with a sparse NSID space can make a
single gap spin the loop billions of times with nothing to remove.
watchdog: BUG: soft lockup - CPU#4 stuck for 26s!
Workqueue: nvme-wq nvme_scan_work [nvme_core]
RIP: 0010:__srcu_read_unlock+0xb/0x20
Call Trace:
nvme_find_get_ns+0x7d/0xb0 [nvme_core]
nvme_scan_ns_list+0xe8/0x280 [nvme_core]
nvme_scan_work+0x18a/0x280 [nvme_core]
process_one_work+0x197/0x380
worker_thread+0x2fe/0x410
kthread+0xe0/0x100
Rename nvme_remove_invalid_namespaces() to nvme_remove_nsid_range()
and give it an open (start, end) NSID range. ctrl->namespaces is
sorted by NSID, so the whole gap is dropped in a single walk that
stops once end is reached. This bounds the work by the namespaces
that are present instead of by the size of the gap. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: tree-checker: validate INODE_REF's namelen
[BUG]
A crafted btrfs image can trigger the following crash:
BUG: unable to handle page fault for address: ffffd1dc42884000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
CPU: 9 UID: 0 PID: 1034 Comm: poc Not tainted 7.1.0-rc4-custom+ #383 PREEMPT(full) 46af0a92938a63be7132e0dfd71e62327c51d5c2
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:memcpy+0xc/0x10
Call Trace:
<TASK>
read_extent_buffer+0xe4/0x100 [btrfs 3cf0785dd58fec8c5ff84633b772f17ce1f92a8f]
btrfs_get_name+0x15e/0x1e0 [btrfs 3cf0785dd58fec8c5ff84633b772f17ce1f92a8f]
reconnect_path+0x165/0x390
exportfs_decode_fh_raw+0x337/0x400
? drop_caches_sysctl_handler+0xb0/0xb0
</TASK>
---[ end trace 0000000000000000 ]---
RIP: 0010:memcpy+0xc/0x10
Kernel panic - not syncing: Fatal exception
[CAUSE]
TThe crafted image has the following corrupted INODE_REF item:
item 9 key (258 INODE_REF 257) itemoff 11544 itemsize 4106
index 2 namelen 4096 name: d\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000
The itemsize matches the namelen, but the namelen is 4096, way larger
than normal name length limit (BTRFS_NAME_LEN, 255).
Meanwhile the memory of the @name is only 255 byte sized, this will cause
out-of-boundary access, and cause the above crash.
[FIX]
Add extra namelen verification for INODE_REF, just like what we have
done in ROOT_REF checks.
Now the crafted image can be rejected gracefully:
BTRFS critical (device dm-2): corrupt leaf: root=5 block=30572544 slot=14 ino=259, invalid inode ref name length, has 4096 expect [1, 255]
BTRFS error (device dm-2): read time tree block corruption detected on logical 30572544 mirror 2
[ Rebase, add a Link: tag, add an simple cause analyze ] |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: validate inline dentry name lengths before conversion
Inline dentry conversion copies names out of the inline dentry area
before checking that each recorded name length fits in the available
filename slots.
A corrupted image can therefore make the conversion path read past
the inline filename storage while building the regular dentry block.
Validate each inline dentry name length against the inline filename
area before copying it. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Fix addr_filter_ranges lifetime
Lee Jia Jie reported that since event::addr_filter_ranges is used
under RCU, it should be RCU freed. |
