Search Results (569 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-3833 2 Gnu, Redhat 17 Gnutls, Cert Manager, Discovery and 14 more 2026-11-05 6.5 Medium
A flaw was found in gnutls. This vulnerability occurs because gnutls performs case-sensitive comparisons of `nameConstraints` labels, specifically for `dNSName` (DNS) or `rfc822Name` (email) constraints within `excludedSubtrees` or `permittedSubtrees`. A remote attacker can exploit this by crafting a leaf certificate with casing differences in the Subject Alternative Name (SAN), leading to a policy bypass where a certificate that should be rejected is instead accepted. This could result in unauthorized access or information disclosure.
CVE-2026-116135 1 Libwww-perl 1 Http-body 2026-11-05 9.8 Critical
HTTP::Body versions before 1.23_01 for Perl drop mixed-case percent escapes from urlencoded form fields instead of decoding them. The decode table holds only the all-lowercase and all-uppercase spelling of each hex pair, while the escape pattern matches either case. An escape such as %aB finds no entry and is replaced with nothing, joining the bytes on either side. Hex digits in percent escapes are case-insensitive, and conforming decoders return the byte. A remote attacker can send a field name or value that a conforming decoder in front of the application reads differently, so that pass%aBword reaches the application as password.
CVE-2026-73856 1 Modsecurity 1 Modsecurity 2026-11-05 8.6 High
ModSecurity is an open source, cross platform web application firewall (WAF) engine for Apache, IIS and Nginx. From 3.0.0 until 3.0.17, src/transaction.cc compares a response Content-Type value against SecResponseBodyMimeType entries case-sensitively. A mixed-case response media type that is semantically equivalent to a configured lowercase type can therefore be treated as unconfigured, causing ModSecurity to skip RESPONSE_BODY inspection. An unauthenticated requester can then receive response content that a phase 4 rule would otherwise block, including sensitive error or debug data. This issue is fixed in version 3.0.17.
CVE-2026-85287 1 Sysadminsmedia 1 Homebox 2026-11-05 6.5 Medium
HomeBox is a home inventory and organization system. Prior to 0.27.0, POST /api/v1/users/register and the users.email uniqueness constraint treat email addresses as case-sensitive while HomeBox uses a case-insensitive login lookup. An unauthenticated attacker who knows a victim's email can register a differently cased variant, creating duplicate rows that cause login to return 401 for both variants and deny the victim access, while also bypassing the one-account-per-email policy. This issue is fixed in version 0.27.0.
CVE-2025-4035 1 Redhat 2 Enterprise Linux, Rhel Els 2026-11-05 4.3 Medium
A flaw was found in libsoup. When handling cookies, libsoup clients mistakenly allow cookies to be set for public suffix domains if the domain contains at least two components and includes an uppercase character. This bypasses public suffix protections and could allow a malicious website to set cookies for domains it does not own, potentially leading to integrity issues such as session fixation.
CVE-2026-121943 1 Irontec 1 Sngrep 2026-11-05 4.8 Medium
Irontec sngrep through 1.9.0 contains an out-of-bounds stack read vulnerability in sip_check_packet and sip_validate_packet caused by an off-by-one length check on 10240-byte SIP payloads. Remote attackers can send a crafted UDP or TCP SIP packet or supply a pcap file to crash sngrep or leak adjacent stack bytes into displayed SIP fields.
CVE-2026-123012 1 Gogs 1 Gogs 2026-11-05 N/A
In Gogs 0.14.3, the Git Smart HTTP authorization layer in internal/route/repo/http.go allows a push when only read access was intended, a different vulnerability than CVE-2026-52810. This occurs because of inconsistency about whether a verb is checked in a case-sensitive manner.
CVE-2026-93903 1 Litespeedtech 1 Litespeed Web Server 2026-11-05 N/A
LiteSpeed Web Server (LSWS) before 6.3.7 build 1 mishandles internal redirect URL validation in a certain "corner case" of %252e%252e double decoding, letting a low-privileged tenant execute code in the context of a different account.
CVE-2026-63121 1 Kubewarden 1 Policies 2026-11-05 6.3 Medium
Kubewarden policies is a collection of WebAssembly policies for securing and governing Kubernetes clusters. For versions provisionally classified as affected before 2.1.2, `trusted-repos-policy` compares an image's `registry` hostname against `reject lists` and `allow lists` case-sensitively even though `registry` DNS names are case-insensitive. An image with an uppercase or mixed-case `registry` hostname can miss a rejection rule for the equivalent lowercase host, so the admission policy accepts a resource whose container runtime pulls the same prohibited image. Only reject-list configurations have this bypass: allow-list configurations fail closed by over-denying differently cased hostnames. The security consequences depend on the configured rejection policy and deployment environment. This issue is fixed in version 2.1.2.
CVE-2026-42010 2 Gnu, Redhat 18 Gnutls, Ai Inference Server, Cert Manager and 15 more 2026-11-04 7.1 High
A flaw was found in gnutls. Servers configured with RSA-PSK (Rivest–Shamir–Adleman – Pre-Shared Key) wrongfully matched usernames containing a NUL character with truncated usernames. A remote attacker could exploit this by sending a specially crafted username, leading to an authentication bypass. This vulnerability allows an attacker to gain unauthorized access by circumventing the authentication process.
CVE-2026-109411 2 Redhat, Samba 4 Enterprise Linux, Openshift, Rhel Els and 1 more 2026-11-04 8.1 High
An access control bypass flaw was identified in Samba's vfs_ceph_rgw module in it's openat() function. An authenticated user can bypass access controls to read or overwrite restricted files on shares configured with the experimental vfs_ceph_rgw module. When a client requests an existing file using mismatched character casing, the module fails to perform a case-insensitive lookup correctly, causing the server to treat the operation as creating a new file. As a result, the server skips standard permission checks on the existing file, allowing the attacker to access or overwrite sensitive data owned by other users.
CVE-2026-108313 1 Tanium 1 Tanium Server 2026-11-04 6.6 Medium
Tanium addressed an incorrect privilege assignment vulnerability in Tanium Server.
CVE-2026-62374 1 Openwallet-foundation 2 Sd-jwt/core, Sd-jwt/decode 2026-11-04 6.5 Medium
SD JWT JS is a JavaScript implementation of the Selective Disclosure JWT (SD-JWT) specification. In version 0.19.0 and earlier, `@sd-jwt/decode`, also used by `@sd-jwt/core`, silently drops a tampered Disclosure whose digest no longer matches the Issuer-signed `_sd` array and returns a reduced claim set, reporting success while the Issuer signature remains valid. Both a tampered Disclosure that remains valid JSON and a Disclosure containing invalid UTF-8 bytes reach this silent-drop behavior. In the latter case, the `TextDecoder / Buffer` decoding path substitutes U+FFFD replacement characters, recovering syntactically valid disclosure data instead of rejecting the malformed input. This violates RFC 9901 section 7.1 step 5, which requires rejection of unreferenced Disclosures, and section 7.1 step 3 / section 4.2.1, which require rejection of invalid Disclosures. A malicious holder can exploit this omission primitive, including through `SDJwtInstance.verify()` when key binding is required. An on-path attacker can also tamper with a Disclosure when the relying party does not enforce key binding; enforced key binding rejects on-path tampering because it invalidates the KB-JWT `sd_hash` binding. If the relying party defaults to allowing access when a constraining age, role, or restriction claim is absent, the silent claim reduction can change an authorization decision without an error. This issue is fixed in `@sd-jwt/core` version 0.20.0; no patched version of the standalone `@sd-jwt/decode` package is identified.
CVE-2026-85254 1 Apache 2 Apache Camel, Camel 2026-11-03 6.5 Medium
Improper Handling of Case Sensitivity vulnerability in Apache Camel Platform HTTP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The guard that prevents a request header being reflected into the response compared header names case sensitively, while HTTP header names are case insensitive. A caller could therefore defeat the suppression simply by varying the case of the header name. HTTP/2 makes the problem unconditional rather than optional: the protocol requires header names to be lowercase on the wire, so the comparison never matched and the suppression was inert for every request on an HTTP/2 connection. The consequence is that content the caller chose is echoed back in the response, which is the basis for response-splitting and cache-poisoning style attacks against whatever sits in front of the Camel endpoint. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Request header names are now compared case insensitively, so the suppression holds regardless of casing and works under HTTP/2. For deployments that cannot upgrade immediately, strip the headers in question in front of the Camel endpoint, or remove them from the response in the route rather than relying on the built-in suppression.
CVE-2026-80343 1 Apache 2 Apache Camel, Camel 2026-11-03 8.2 High
Improper Handling of Case Sensitivity vulnerability in Apache Camel Netty HTTP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. The camel-netty-http security constraint compared the request path against the configured context path using a case-sensitive match, while the routing that dispatches the request to the endpoint did not apply the same rule. The two comparisons therefore disagreed for any path whose case differed from the configured value. An external caller could alter the case of a character in a path segment so that the security constraint no longer recognised the path as protected, while the request still dispatched to the same endpoint. The result is that the constraint is skipped and the protected route is reached without satisfying it. No credential, prior access or special configuration is required beyond being able to send a request to the consumer. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The constraint now matches the request path with the same case rules the dispatch uses, so the two can no longer disagree. For deployments that cannot upgrade immediately, place the authorization decision in front of the Camel consumer, for example in a reverse proxy that normalises the request path before forwarding.
CVE-2026-119674 1 Mongodb 1 Database Tools 2026-11-03 3.7 Low
MongoDB Database Tools mongorestore incorrectly URL-decodes an original collection name read from metadata when the corresponding dump filename has been truncated. A database user who can create and populate a suitably encoded collection can cause a later authorized directory restore to write those documents into a different collection that the user cannot modify directly. When both collection names resolve to the same destination, backed-up documents may be omitted; use of --drop can also replace the unintended destination collection. Exploitation requires an operator to restore the affected collection from a directory dump with write access to the destination. This issue affects MongoDB Database Tools versions 100.0.2 through versions before 100.20.1.
CVE-2026-118650 1 Labstack 1 Echo 2026-11-02 7.5 High
Echo is a Go web framework. Prior to 4.16.0 and 5.4.0, a globally mounted middleware.Static instance can interpret an encoded request path differently from Echo's router because the router matches the still-encoded path while the static handler uses the decoded URL.Path. The advisory demonstrates an encoded slash resolving to a file under the static root through the global static middleware, but the source is internally inconsistent about whether a route or group guard protects the corresponding literal path in that global-mount configuration. This issue is fixed in 4.16.0 and 5.4.0.
CVE-2026-83781 1 Microsoft 13 Windows 11 23h2, Windows 11 23h2, Windows 11 24h2 and 10 more 2026-11-02 7.8 High
Improper null termination in Windows Program Compatibility Assistant Service allows an authorized attacker to elevate privileges locally.
CVE-2026-84177 1 Apache 1 Wicket 2026-11-02 N/A
Incorrect behavior order in Apache Wicket: a file path is validated before the framework appends the attributes that complete it. org.apache.wicket.request.resource.PackageResource asks the configured package resource guard about a path built from the scope class' package and the file name in the request URL, and then hands that same path to the resource stream locator together with a style, a variation and a locale. Those three attributes are decoded from the name of the first query parameter and never appear in the string the guard was given. org.apache.wicket.core.util.resource.locator.ResourceNameIterator appends them to that path, each preceded by an underscore, in the order variation, style, locale, before the file extension, so the file that is opened is not the file the guard approved. org.apache.wicket.markup.html.PackageResourceGuard decides whether an HTML file is a component's markup template by looking for a class file of the same name beside it, stripping one underscore-delimited suffix at a time as it goes. HTML is on the default allow list, so that check is the only thing separating a static HTML file, which may be served, from a markup template, which may not. Asked about the name of a template, the guard refuses it correctly. Asked about a shorter name for which no class exists, it accepts, and a style supplied in the URL then completes that name into the markup template of a component class, which is written to the response. An application is affected if the simple name of any of its component classes contains an underscore and no shorter part of that name is itself a class, such as Report_v2 or Wizard_Step1; an application with no such class name is not affected. No unusual deployment, packaging or configuration is required, and running in deployment rather than development mode does not prevent it. Java naming conventions discourage underscores in class names and no module Wicket ships has one, so no framework markup is exposed; what an application exposes this way is its own. A component whose class name has no underscore is not reachable, and neither is its localized or styled markup, because the guard finds the class file under the base name and refuses the request. The attributes cannot change the file extension and cannot leave the component's package, so nothing beyond HTML files in that package is reachable. Access is read-only, and what is disclosed is developer-authored template content: component structure, developer comments, markup that is rendered only under some conditions, inline script, and the endpoints a template names. No user data, credential or session material is reachable this way. An attacker has to name a class in the target package and the component itself, and Wicket writes fully qualified class names into the URL of every package resource it renders. This issue affects Apache Wicket: from 8.0.0 through 8.19.0, from 9.0.0 through 9.24.0, from 10.0.0 through 10.11.0. Users of Apache Wicket 7.x or older, which are no longer supported, should upgrade to a supported version. Users are recommended to upgrade to version 8.20.0, 9.25.0 or 10.12.0, which fix the issue.
CVE-2026-116542 1 Netty 2 Netty-tcnative, Netty-tcnative-boringssl-static 2026-10-31 5.3 Medium
Netty netty-tcnative before 2.0.84.Final contains an SNI hostname spoofing vulnerability that allows remote unauthenticated clients to alter hostnames via JNI NewStringUTF decoding. Attackers can send overlong encodings like 0xC0 0x80 in the ClientHello server_name to confuse SNI-based certificate selection, access decisions, and logging.