| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Dell Command | Intel vPro Out of Band, versions prior to 4.7.2, contain an Incorrect Default Permissions vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Information Disclosure. |
| Dell Command | Integration Suite for System Center, versions prior to 6.7.2, contain an Incorrect Default Permissions vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Information Disclosure. |
| Incorrect default permissions in the installation directory of WatchDog Anti-Virus on Windows allow local, low-privileged users to modify, replace, or delete antivirus binaries and configuration files, because the installer grants the Users group Full Control over C:\Program Files (x86)\Watchdog Anti-Virus. This may disable antivirus protection or enable privileged code execution if modified binaries are loaded by an elevated WatchDog process. |
| A container privilege escalation flaw was found in certain Ansible Automation Platform images. This issue arises from the /etc/passwd file being created with group-writable permissions during the build process. In certain conditions, an attacker who can execute commands within an affected container, even as a non-root user, can leverage their membership in the root group to modify the /etc/passwd file. This vulnerability allows an attacker to add a new user with any arbitrary UID, including UID 0, gaining full root privileges within the container. |
| In Eclipse Ankaios versions 0.1.0 through 1.0.2, the agent creates workload files and Control Interface named pipes (FIFOs) under a predictable path derived from the agent name and a hash of the workload's runtime configuration. If a directory or FIFO already exists at that path when the agent (re)starts, the agent reuses it based only on an existence and/or file-type check, without validating its owner or permissions. A local, unprivileged user with write access to the same base directory (by default under `$TMPDIR/ankaios`, e.g. shared `/tmp`) can pre-create this path hierarchy, including the two Control Interface FIFOs, before the agent starts. The agent then treats the attacker-owned FIFOs as the legitimate Control Interface for the targeted workload. The attacker can complete the Control Interface handshake and issue requests using that workload's configured `controlInterfaceAccess` permissions, allowing impersonation of the workload and, depending on its configured permissions, unauthorized reading and/or modification of the cluster's desired state. |
| Vulnerability in the Oracle Hyperion Data Relationship Management product of Oracle Hyperion (component: Access and security). The supported version that is affected is 11.2.26.0.000. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTPS to compromise Oracle Hyperion Data Relationship Management. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Hyperion Data Relationship Management accessible data and unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Hyperion Data Relationship Management. CVSS 3.1 Base Score 7.1 (Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:H/A:L). |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix call to hardware monitoring event handler
The first parameter of hwmon_notify_event() is supposed to be the hardware
monitoring device. The bnxt driver calls it with the platform device as
first parameter instead. This API break results in undefined behavior and
may result in a crash.
Pass the hardware monitoring device as parameter instead to fix the
problem. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check pointer type for all atomic RMW paths
Atomic RMW verification records an instruction pointer type only when the
current destination is PTR_TO_ARENA. A second path can therefore reach the
same instruction with an ordinary pointer without comparing it against the
saved arena type.
The post-verification fixup uses the saved type to rewrite the instruction
to BPF_PROBE_ATOMIC for every path. Record the actual destination type for
all atomic RMW paths so the existing mismatch check rejects incompatible
uses of one instruction. |
| The go-getter library up to versions 1.8.8 and 2.2.3 is vulnerable to a privilege escalation issue in its archive decompression handling that may allow a crafted archive to cause extracted files to be created with elevated permission bits. Where extraction is performed by a privileged user, this may allow a local actor to obtain the privileges of the extracting process. This vulnerability (CVE-2026-88922) is fixed in go-getter 1.8.9 and 2.2.4. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: replace forgeable discard filler with a keyed sector marker
The discard-block check in dm_integrity_rw_tag() treats a stored tag
of all 0xf6 bytes (DISCARD_FILLER) as proof a block was discarded and
skips HMAC verification. allow_discards is only accepted in
dm-integrity's standalone mode. An attacker with raw write access to
the backing device, but without the integrity key, can stamp any block
with an all-0xf6 tag and have it served as authentic.
Add a new "allow_discards_keyed" target argument that marks discarded
blocks with a keyed checksum of (salt || sector) instead, computed by
integrity_discard_checksum(). |
| Local privilege escalation due to insecure file permissions. The following products are affected: Acronis Backup plugin for cPanel & WHM (Linux) before build 1.9.3.1021, Acronis Backup extension for Plesk (Linux) before build 1.8.11.638, Acronis Backup plugin for DirectAdmin (Linux) before build 1.2.3.238. |
| DD-WRT firmware, as deployed on TP-Link TL-WR740N v1 through v4 hardware, stores sensitive authentication credentials in cleartext within non-volatile memory. The exposed material includes SSH private keys, dynamic DNS passwords, email notification credentials and administrative passwords. An attacker with physical access to the device can extract these credentials from an SPI flash dump, leading to device compromise, infiltration of the connected network and unauthorised access to dependent third-party services. |
| Dell Repository Manager, versions prior to 3.5.2, contains an Incorrect Default Permissions vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Elevation of privileges. |
| Nextflow is a DSL for data-driven computational pipelines. From 25.09.2-edge until 25.10.6 and 26.04.3, nextflow auth login writes Seqera Platform OIDC bearer tokens to ${NXF_HOME:-~/.nextflow}/seqera-auth.config through AuthCommandImpl.writeConfig in plugins/nf-tower/src/main/io/seqera/tower/plugin/auth/AuthCommandImpl.groovy without setting restrictive file permissions, allowing the default umask 022 to create the file with mode 0644. On a multi-user POSIX host, a local user who can traverse the victim's home directory can read seqera-auth.config and impersonate the victim against Seqera Platform within the token's scope. Single-user systems and headless CI runners that do not use the interactive login flow are not affected. This issue is fixed in 25.10.6 and 26.04.3. |
| A flaw was found in Podman. If an attacker can pass a crafted tar archive to the `podman load` command, they can create files on the host machine with the privileges of the user running Podman. |
| Strimzi provides a way to run an Apache Kafka cluster on Kubernetes or OpenShift in various deployment configurations. In Strimzi 1.0.0 and earlier, deploying only the Topic Operator or only the User Operator through the Kafka custom resource leaves the Entity Operator ServiceAccount with RBAC permissions for both components. The excess permissions can allow access to KafkaUser custom resources and Secrets when the User Operator is absent, or access to KafkaTopic custom resources when the Topic Operator is absent. This issue is fixed in versions 1.0.1 and 1.1.0. |
| A flaw was found in firewalld. A local unprivileged user can exploit this vulnerability by mis-authorizing two runtime D-Bus (Desktop Bus) setters, setZoneSettings2 and setPolicySettings. This mis-authorization allows the user to modify the runtime firewall state without proper authentication, leading to unauthorized changes in network security configurations. |
| Vendor could not replicate the vul, and reporter is unavailable to comment. |
| moment is a JavaScript date library for parsing, validating, manipulating, and formatting dates. In versions 2.29.2 through 2.30.1, a specially crafted non-string object passed to moment.locale() can bypass the locale-name path-traversal guard. The guard assumes the input is a string, so an object whose match() method satisfies the check while its toString() returns a traversal path reaches an internal require() call with attacker-controlled path segments. This is an incomplete fix for CVE-2022-24785 and primarily affects npm (server-side) users that pass user-provided input directly to moment.locale(). The issue is fixed in moment 2.31.0, and users should upgrade to 2.31.0 or later. As a workaround, validate that any user-supplied input is a string before passing it to moment.locale(). |
| In the Linux kernel, the following vulnerability has been resolved:
sysctl: move the "cad_pid" entry from pid_table[] to kern_reboot_table[]
cad_pid is global, and kill_cad_pid() is only used in the root namespace.
However, due to pid_table_root_permissions(), a non-root user can unshare
pid/user namespaces and modify it from the child namespace. This makes no
sense and is simply wrong.
Move it to kern_reboot_table[] where it logically belongs; this ensures
that only GLOBAL_ROOT_UID can read/modify this sysctl.
Note that this patch doesn't preserve "#ifdef CONFIG_PROC_SYSCTL" around
the "cad_pid"; CONFIG_PROC_SYSCTL selects CONFIG_SYSCTL, so it is always
set when kern_reboot_table[] is compiled. |
