| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in the gnome-remote-desktop package. The gnome-remote-desktop system daemon performs inadequate validation of session agents using D-Bus methods related to transitioning a client connection from the login screen to the user session. As a result, the system RDP TLS certificate and key can be exposed to unauthorized users. This flaw allows a malicious user on the system to take control of the RDP client connection during the login screen-to-user session transition. |
| FrankenPHP before 1.13.4 contains an information disclosure vulnerability in worker mode that fails to clear last HTTP stream response headers between requests, because the reset only happens in RSHUTDOWN, which worker requests skip. Later requests calling http_get_last_response_headers() can read headers fetched by earlier requests on the same worker thread, exposing other users' Set-Cookie or token headers from backend APIs. |
| Traefik 2.x before 2.11.60 and 3.x before 3.7.16 sends ForwardAuth subrequests (and, in 3.7, Ingress NGINX auth-url requests) through an auth-server connection pool shared by all clients, exposing connection-bound NTLM or Negotiate authentication. An unauthenticated attacker can reuse another user's authenticated connection, receiving the victim's identity via authResponseHeaders to access backends as that user. |
| CGI::Carp versions before 5.00 for Perl leak warnings across requests in persistent environments via the warningsToBrowser buffer.
Warnings are held in a package-level buffer until warningsToBrowser writes them into the page as HTML comments, and the buffer is never cleared between requests. Under mod_perl, FastCGI or PSGI, warnings from one request are written into a later one.
Warnings that contain one user's request data can appear in the HTML sent to another user. |
| Exposure of Data Element to Wrong Session vulnerability in Apache Camel Thrift component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
The Thrift data format unmarshalled incoming data into the shared defaultInstance of the target type rather than into a fresh copy, and returned that shared object as the exchange body. Because the instance is shared process-wide, state written while unmarshalling one message stayed on the object and was visible to every later message that used the same type. Fields absent from a later payload retained the previous message's values, so content belonging to one sender could be read while processing another sender's message, and concurrent exchanges could observe each other's partially written state. In a deployment that serves more than one tenant or user through the same route, that is disclosure of one party's data to another.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Unmarshalling now deserializes into a copy, so each exchange gets its own instance and no state carries between messages. For deployments that cannot upgrade immediately, copy the unmarshalled body into a new instance immediately after the data format runs, and do not retain references to the returned object. |
| Exposure of Data Element to Wrong Session vulnerability in Apache Camel AS2 component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
Signing material belonging to an individual request was stored in state that is shared across requests rather than confined to the request being processed. Where a deployment serves more than one trading partner, concurrent or successive requests could therefore observe each other's material, and a Message Disposition Notification could be signed with the key of a partner other than the one the receipt was for. The result is cross-partner key confusion: a receipt attributable to the wrong partner, and one partner's signing material used while handling another partner's exchange. AS2 deployments are typically multi-partner by design, so the condition is reached by ordinary concurrent traffic rather than by anything the attacker must arrange.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Per-request signing keys are now confined to the request being processed in ResponseMDN. For deployments that cannot upgrade immediately, run a separate Camel context per trading partner so that no signing material is shared between them. |
| A flaw in the connection management layer of the MongoDB Node.js driver can leave a pooled network connection in the pool for reuse while data from an earlier operation is still outstanding on it. In applications that enable an optional client-side operation timeout, an unauthenticated party that can send ordinary requests to the application may cause database replies to be paired with the wrong requests. This may result in unintended disclosure of other users' records, incorrect operation results being returned, and failures of legitimate requests. |
| GraphQL Tools provides utilities for building, stitching, and mocking GraphQL schemas. Prior to version 1.1.36 of the GraphQL Tools legacy WebSocket executor package, buildWSLegacyExecutor in packages/executors/legacy-ws/src/index.ts retains request.extensions.connectionParams in the closure-scoped executorConnectionParams object after cleanupWebsocket closes a connection. When one executor is reused across different authorization contexts, a later request that omits a sensitive key can send an earlier caller's Authorization or tenant value in its connection_init payload, causing the downstream server to authenticate the later caller as the earlier user. Applications that create a new executor for every request are not affected. This issue is fixed in version 1.1.36 of the GraphQL Tools legacy WebSocket executor package. |
| GraphQL Tools provides utilities for building, stitching, and mocking GraphQL schemas. Prior to version 1.1.36 of the GraphQL Tools legacy WebSocket executor package, buildWSLegacyExecutor in packages/executors/legacy-ws/src/index.ts reuses one WebSocket and replaces its single websocket.onmessage handler whenever a new overlapping subscription starts. The handler delivers LEGACY_WS.DATA frames to the newest observer without comparing data.id with the subscription operation id, so a caller using the same executor can receive another user's authorized subscription payload while the earlier caller's stream is starved. This issue is fixed in version 1.1.36 of the GraphQL Tools legacy WebSocket executor package. |
| The A2A server component in Amazon Strands Agents SDK for Python before 1.43.0 and Amazon Strands Agents SDK for TypeScript before 1.5.0 does not properly isolate conversation state between callers. An authenticated remote user could read other tenants' conversation history and add persistent instructions that alter model behavior for subsequent callers via HTTP requests to the A2A endpoint using a different context_id.
To mitigate this issue, users should upgrade to strands-agents 1.43.0 (Python) or @strands-agents/sdk 1.5.0 (TypeScript). |
| Robots::Validate versions from 0.4.3 before 0.4.10 for Perl report clients as imposter robots when User-Agent matcher state carries over from a previous request.
Each Robots::Validate object holds one pure-Perl Aho-Corasick search machine and feeds every User-Agent into it without resetting its state. A User-Agent that ends part-way through a robot name leaves the machine mid-match, so the next User-Agent checked by the same object can complete that name. That client's address is then checked against the robot's DNS rule, which it fails.
A remote client can use this to make a site that blocks bad robots block other visitors where the prefix User-Agent string is a suffix of a robot being validated.
Note that deployments with Algorithm::AhoCorasick::XS are also affected, since it was unused due to a different bug. |
| When `CURLOPT_INTERFACE` (or the command line tool's `--interface` option) is
set with one of the documented prefixes (`if!`, `host!`, `ifhost!`), that
binding is not part of the connection reuse key, so a later transfer asking
for a different source can silently reuse an existing connection and go out
from the earlier transfer's source address |
| An `ftp://` transfer configured with `CURLUSESSL_NONE` can reuse a pooled FTP
control connection that a previous easy handle upgraded with `STARTTLS` and
authenticated using a client certificate. The second handle performs neither a
new TLS handshake nor a new FTP login, so the server continues to authorize it
under the first handle's certificate identity. |
| A flaw was found in pulp-ansible's bearer-token refresh for collection remotes. The access token is kept in one module-level variable and reused for every token download in that worker. A user who can sync an Ansible remote that uses token refresh, and can point that remote at a server they control, receives an access token obtained for a different remote, and can reuse it at the service that issued it. Content stored in Pulp is not changed, and the service is not stopped. |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: Serviceability). Supported versions that are affected are Oracle Java SE: 8u503, 8u503-perf, 11.0.32.1, 17.0.20.1, 21.0.12.1, 25.0.4.1, 27; Oracle GraalVM for JDK: 17.0.20.1 and 21.0.12.1; Oracle GraalVM Enterprise Edition: 21.3.19.1.1. Difficult to exploit vulnerability allows unauthenticated attacker with logon to the infrastructure where Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition executes to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data and unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 3.6 (Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:N/UI:R/S:U/C:N/I:L/A:L). |
| Vulnerability in the MySQL Server, MySQL Cluster product of Oracle MySQL (component: Server: Connection Handling). Supported versions that are affected are MySQL Server: 9.7.0-9.7.3, 26.7.0-26.7.1; MySQL Cluster: 9.7.0-9.7.3 and 26.7.0-26.7.1. Easily exploitable vulnerability allows low privileged attacker with network access via multiple protocols to compromise MySQL Server, MySQL Cluster. Successful attacks of this vulnerability can result in unauthorized read access to a subset of MySQL Server, MySQL Cluster accessible data. CVSS 3.1 Base Score 4.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N). |
| Traefik from v3.2.0 before v3.7.14 contains an authentication bypass vulnerability in the experimental FastProxy connection pool, which fails to pin NTLM/Negotiate-authenticated backend connections to their frontend connection. Unauthenticated clients can be handed a pooled keep-alive backend connection where a victim completed an NTLM or Negotiate handshake, letting them read victim data and act as that victim. |
| Incorrect object recycling and re-use vulnerability in Apache Tomcat affecting HTTP/2 processing of asynchronous servlets can trigger request and/or response mix-up between users.
This issue affects Apache Tomcat: from 11.0.22 through 11.0.26, from 10.1.55 through 10.1.60, from 9.0.118 through 9.0.122.
Users are recommended to upgrade to version 11.0.27, 10.1.61 or 9.0.123, which fixes the issue. |
| In Apache CXF, STSTokenValidator checks whether a SAML assertion is signed by a trusted certificate before deciding to send it to the STS. That result was stored in one object shared by all requests, so one request could read another's result. A remote, unauthenticated attacker could send a forged assertion signed with an untrusted certificate while legitimate requests were being processed, and it could be accepted as trusted without ever reaching the STS. Only services that use STSTokenValidator to validate SAML tokens without alwaysValidateToSts set are affected.
Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue. |
| A flaw was found in Quarkus REST that allows request parameters to leak between concurrent requests if endpoints use field injection without a CDI scope. This vulnerability allows attackers to manipulate request data, impersonate users, or access sensitive information. |
