| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: fq_codel: clamp default quantum and mtu
fq_codel_init() sets q->quantum = psched_mtu(qdisc_dev(sch)) without
clamping. A device with a huge MTU (e.g. dummy with max_mtu == 0
accepting MTU 2147483634) makes psched_mtu() return 0x80000000, which
overflows the signed flow->deficit to INT_MIN in fq_codel_dequeue(),
causing an infinite loop and soft lockup. Emulate fq_codel_change()
and constrain to [256, FQ_CODEL_QUANTUM_MAX].
The same unclamped psched_mtu() is assigned to q->cparams.mtu a bit
below, and fq_codel_change() never updates it. codel_should_drop()
tests "*backlog <= params->mtu"; with mtu == 0x80000000 (~2 GiB) and
the default 32 MiB memory_limit, the test is always true, so CoDel is
silently and completely disabled (no drops, no ECN). Declare a single
clamped mtu and assign both q->quantum and q->cparams.mtu from it,
which also removes the double psched_mtu() call.
Conditions to recreate the bug: a device whose MTU (plus
hard_header_len) wraps psched_mtu() into the sign bit (e.g. a dummy
device with max_mtu == 0 accepting MTU 2147483634). Requires
CAP_NET_ADMIN in a user namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check load-acquire src ptr type before the load
check_atomic_load() calls check_load_mem() before atomic_ptr_type_ok().
For a load-acquire that fetches into its own source register (dst_reg ==
src_reg), check_load_mem() overwrites src_reg's type with the type of the
loaded value, so the subsequent atomic_ptr_type_ok() no longer sees the
source pointer and fails to reject the disallowed types (ctx, pkt,
flow_keys, sock).
Since bpf_convert_ctx_accesses() does not rewrite atomic loads, the raw
access to the underlying kernel object is left in place. The destination
type is taken from the ctx access itself, so a load-acquire of the sk
field of struct __sk_buff for example leaves the register typed as
PTR_TO_SOCK_COMMON_OR_NULL, which type_is_sk_pointer() does not match
either, while it actually holds unconverted struct sk_buff bytes. Once
the NULL check has passed this is a type confusion, not just a leak of
kernel data.
Validate src_reg with check_reg_arg() and check the source pointer type
with atomic_ptr_type_ok() before the load again, mirroring
check_atomic_rmw(). Out-of-range register numbers are already rejected
earlier by check_and_resolve_insns() (commit 503d21ef8eac ("bpf: Do
register range validation early")), and the only exemption there,
is_stack_arg_ldx(), requires BPF_LDX | BPF_MEM | BPF_DW and thus never
matches a BPF_ATOMIC insn. atomic_ptr_type_ok() can therefore not
dereference register state out of bounds, that is, the out-of-bounds
read addressed by the Fixes commit below does not reappear (as proven
also via selftest). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check pointer type for all atomic RMW paths
Atomic RMW verification records an instruction pointer type only when the
current destination is PTR_TO_ARENA. A second path can therefore reach the
same instruction with an ordinary pointer without comparing it against the
saved arena type.
The post-verification fixup uses the saved type to rewrite the instruction
to BPF_PROBE_ATOMIC for every path. Record the actual destination type for
all atomic RMW paths so the existing mismatch check rejects incompatible
uses of one instruction. |
| A vulnerability in the certification authentication feature of Internet Key Exchange version 2 (IKEv2) for Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly.
This vulnerability is due to a logic error during the certificate authentication phase of the IKEv2 connection setup. An attacker could exploit this vulnerability by attempting to establish an IKEv2 VPN connection with a crafted certificate. A successful exploit could allow the attacker to cause the IKEv2 process to crash, causing a denial of service (DoS) condition. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: fix handling channel context with different bands in mt76_switch_vif_chanctx()
When performing channel switches on different radios within a short
timeframe, channel contexts with different bands can be carried for
each struct ieee80211_vif_chanctx_switch.
Rework mt76_switch_vif_chanctx() to properly handle this scenario. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix sleepable check for tracing/lsm prog
When CONFIG_FUNCTION_ERROR_INJECTION is disabled, a sleepable tracing prog
is allowed to attach to '__x64_'-alike prefix symbols.
It is because the verifier does not verify whether the symbol is a kernel
function or a bpf prog. That said, a sleepable tracing prog is allowed to
attach to a bpf prog target whose name has '__x64_'-alike prefix.
For example, a sleepable fentry prog attaches to a '__x64_sys_nop' XDP
prog, and copies buffer from a user pointer with bpf_copy_from_user()
helper. After attaching the XDP prog to lo interface, the kernel BUG
could be triggered by 'ping -c 1 -W 1 127.0.0.1':
[ 3.460756] BUG: sleeping function called from invalid context at kernel/bpf/trampoline.c:1324
Fix it by disallowing sleepable prog always when its target
btf is not a kernel's btf. |
| Incorrect type conversion or cast in Microsoft Windows Search Component allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVM: Ensure INVVPID is emulated on the correct physical CPU
When emulating INVVPID, KVM executes INVVPID on the physical CPU using
vpid02 (instead of the L1 assigned VPID), after doing some validations
on the operands. However, it is possible that the physical CPU KVM
executes INVVPID on is different from the CPU L2 is running on.
For example, in the following scenario:
- L2 runs on CPU #1 and exits to L1 (vmx->nested.vmcs02.cpu=1)
- L1 migrates to CPU #2 and executes INVVPID
- KVM executes INVVPID on CPU #2
- L1 migrates back to CPU #1 and runs L2 (vmx->nested.vmcs02.cpu=1)
The TLB entries on CPU #1 are never invalidated, because INVVPID was
executed on CPU #2, and vmcs02 never ran on a different pCPU (i.e.
vmx_vcpu_load_vmcs() will *not* request KVM_REQ_TLB_FLUSH).
Ensure that INVVPID is being executed on the same pCPU that L2 last ran
on, and if not, fallback to clearing last_vpid=0 to trigger a full VPID
flush on the next nested VM-Enter (as KVM will detect L1 using a
different VPID for L2). If L2 ends up running on a different pCPU, KVM
will flush the TLB anyway through vmx_vcpu_load_vmcs(). |
| In read of MatroskaExtractor.cpp, there is a possible out-of-bounds write due to improper casting. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. |
| Mattermost versions <=11.9 11.0.9 11.4.8 11.7.7 10.22.11.0 fail to recover from handler panics, which allows an authenticated user to crash the plugin via a post-action request with an unexpected field type.. Mattermost Advisory ID: MMSA-2026-00701 |
| Incorrect type conversion or cast in Safebrowsing in Google Chrome on on Mac prior to 153.0.8010.36 allowed a remote attacker to bypass system access restrictions via a crafted file. (Chromium security severity: Low) |
| In multiple functions of ftsmooth.c, there is a possible memory safety issue due to improper casting. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check sk_state before sk_protocol in bpf_tcp_*_syncookie
bpf_tcp_gen_syncookie and bpf_tcp_check_syncookie accept a socket pointer
'sk' with argument type ARG_PTR_TO_BTF_ID_SOCK_COMMON. However, they access
sk->sk_protocol without validating whether 'sk' represents a full socket.
Fix this issue by checking sk->sk_state != TCP_LISTEN before inspecting
sk->sk_protocol in both bpf_tcp_gen_syncookie and bpf_tcp_check_syncookie.
Since mini-sockets are never in the TCP_LISTEN state, the condition
short-circuits and prevents dereferencing fullsock-specific fields. |
| iccDEV provides a set of libraries and tools for working with ICC color management profiles. Versions prior to 2.3.2.1 have a `CIccEmbedIO::Read8()` size_t underflow. The issue arises due to an embedded-profile read defect when parsing ICC profiles containing `icSigEmbeddedV5ProfileTag` data with `icSigEmbeddedProfileType` payloads. Version 2.3.2.1 patches the issue. No known workarounds are available. |
| Mattermost versions 11.7.x <= 11.7.6, 10.11.x <= 10.11.21, 11.8.x <= 11.8.3 fails to validate WebSocket command field types which allows an authenticated user to crash the plugin process and deny service to all Boards users via a custom_focalboard_SUBSCRIBE_TEAM message with a non-string teamId.. Mattermost Advisory ID: MMSA-2026-00687 |
| The User Profile Builder plugin for WordPress is vulnerable to Authentication Bypass via Type Confusion in versions up to, and including, 3.16.4. This is due to the wppb_log_in_user() function calling absint() on the return value of wp_insert_user() before performing an is_wp_error() check — when a registration is submitted with a 61–70 character username, WordPress core rejects it with a WP_Error object, but absint() coerces that object to the integer 1 before the error check can short-circuit execution, causing the plugin to bind and return a transient-backed autologin nonce tied to user ID 1. This makes it possible for unauthenticated attackers to log in as the site's Administrator account (user ID 1), resulting in full administrative takeover of the site. |
| Russh is a Rust SSH client & server library. Prior to 0.62.4, a malicious SSH server can crash a russh client session with a malformed KEX_ECDH_REPLY containing a server ephemeral value that is not 32 bytes long. The client-side Curve25519Kex::compute_shared_secret function in russh/src/kex/curve25519.rs passes the decoded exchange.server_ephemeral value to clone_from_slice without validating its length, causing a deterministic panic before the server host key is verified. The panic terminates the spawned client session task and surfaces as a JoinError, while the embedding process normally remains running. This issue is fixed in version 0.62.4. |
| rsync before 3.5.0 contains a privilege confusion vulnerability in the name-converter subprocess uid/gid mapping that allows local attackers to cause transferred files to be owned by root by influencing name-converter responses to return empty values. When the name-converter subprocess returns an empty response for a uid or gid lookup, rsync incorrectly interprets it as a successful resolution to uid/gid 0 (root) rather than a lookup failure, and if the name-converter also signals fake super-user status, rsync proceeds with root ownership assignments for transferred files. |
| The dataplane token validator in kuma-cp performs an unchecked Go type assertion on the JWT kid header. A token whose kid is a JSON number decodes as a float64 and triggers a runtime panic before any signature, claims, or authorization check runs.
The panic terminates the entire kuma-cp process, HTTP API, the health and readiness endpoints, and xDS. Unauthenticated access to the dataplane gRPC server can trigger the crash with a malformed token
A single request is a transient interruption; sustaining an outage requires repeated requests. |
| An information leakage vulnerability was reported in the TCG TPM 2.0 reference code that could allow a local attacker with elevated privileges to obtain a credential from a TPM-aware CA for a falsified TPM key (such as an Attestation Key, DevID Key or TLS authentication key) and falsify other TPM 2.0 attestations with this key. See also TCG VRT0010. |
