Export limit exceeded: 398278 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 101003 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (101003 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90089 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Validate the FW dump header length nxp_process_fw_dump() pulls the ACL header off the frame and then reads seq_num and buf_len from a struct nxp_fw_dump_hdr placed at skb->data, without checking that the ACL payload is long enough to contain it. h4_recv_buf() collects HCI_ACL_HDR_SIZE bytes of header followed by the number of payload bytes named in that header, so skb->len is 4 + dlen with dlen supplied by the controller and possibly smaller than the 8 byte dump header, or zero. A short frame with connection handle 0xfff therefore reads both fields from beyond the received data. Beyond the read itself, buf_len is what terminates a dump: a value of zero makes the driver call hci_devcd_complete() and reset the controller, so a truncated frame can end a dump early. Use skb_pull_data() to validate and pull the FW dump header before accessing its fields. Warn and reject the chunk if the header is truncated. | ||||
| CVE-2026-90234 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: NFS: Return a delegation the client fails to record When an NFS server grants a delegation in an OPEN reply, nfs_inode_set_delegation() records it on the client. However, three of its error flows return without sending DELEGRETURN. A delegation can be relinquished only by DELEGRETURN (RFC 8881 Section 20.2.4), so dropping one silently leaves the server believing the client still holds it. If the server happens to recall that delegation, the client answers CB_RECALL with NFS4ERR_BADHANDLE because it has no record of the stateid. The server revokes the delegation and moves it onto its cl_revoked list, because the client never sends the FREE_STATEID that would drain it. Every subsequent SEQUENCE reply then carries SEQ4_STATUS_RECALLABLE_STATE_REVOKED, and the client's state manager loops issuing TEST_STATEID across its delegations without ever clearing the condition. The window is easy to reach now that a server offers a write delegation on any write OPEN: a delegation recalled for one opener races a re-open that the server answers with a fresh write delegation. Instead of dropping it, hand the delegation back during these error flows. | ||||
| CVE-2026-90312 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Check load-acquire src ptr type before the load check_atomic_load() calls check_load_mem() before atomic_ptr_type_ok(). For a load-acquire that fetches into its own source register (dst_reg == src_reg), check_load_mem() overwrites src_reg's type with the type of the loaded value, so the subsequent atomic_ptr_type_ok() no longer sees the source pointer and fails to reject the disallowed types (ctx, pkt, flow_keys, sock). Since bpf_convert_ctx_accesses() does not rewrite atomic loads, the raw access to the underlying kernel object is left in place. The destination type is taken from the ctx access itself, so a load-acquire of the sk field of struct __sk_buff for example leaves the register typed as PTR_TO_SOCK_COMMON_OR_NULL, which type_is_sk_pointer() does not match either, while it actually holds unconverted struct sk_buff bytes. Once the NULL check has passed this is a type confusion, not just a leak of kernel data. Validate src_reg with check_reg_arg() and check the source pointer type with atomic_ptr_type_ok() before the load again, mirroring check_atomic_rmw(). Out-of-range register numbers are already rejected earlier by check_and_resolve_insns() (commit 503d21ef8eac ("bpf: Do register range validation early")), and the only exemption there, is_stack_arg_ldx(), requires BPF_LDX | BPF_MEM | BPF_DW and thus never matches a BPF_ATOMIC insn. atomic_ptr_type_ok() can therefore not dereference register state out of bounds, that is, the out-of-bounds read addressed by the Fixes commit below does not reappear (as proven also via selftest). | ||||
| CVE-2026-90321 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate inline xattrs during inode block validation Patch series "ocfs2: validate xattr entry bounds", v7. This series validates OCFS2 xattr entry name/value bounds when xattr metadata is read and validated, before getxattr() or listxattr() can walk out-of-range entry arrays or offsets from corrupted metadata. This patch (of 2): ocfs2_validate_inode_block() verifies a dinode before OCFS2 users walk metadata from it, but inline xattr metadata is still checked only in operation-specific consumers. The existing ibody lookup helper validates inline header placement and entry count, but inode block validation does not reject entry name/value bounds. Add a flat xattr entry validator and call it from inode block validation for inline xattrs. Keep the operation paths on their existing header/count lookup checks; the full entry bounds check now runs when the inode block is validated at read time. Reject corrupted inline xattr metadata before ocfs2_xattr_ibody_get() or listxattr() can walk past the inline storage. Validation reproduced this kernel report: BUG: KASAN: use-after-free in ocfs2_xattr_find_entry+0x5a/0x170 Read of size 2 at addr ffff8881242a2000 by task python3/529 Call Trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 kasan_report+0xe0/0x110 ocfs2_xattr_find_entry+0x5a/0x170 ocfs2_xattr_get_nolock+0x20a/0x820 ocfs2_xattr_get+0x10c/0x1e0 __vfs_getxattr+0xe2/0x130 vfs_getxattr+0x185/0x1b0 | ||||
| CVE-2026-90326 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix race between policy activation and blkg destruction When switching an IO scheduler on a block device, blkcg_activate_policy() allocates blkg_policy_data (pd) for all blkgs attached to the queue. However, blkcg_activate_policy() may race with concurrent blkcg deletion, leading to use-after-free and memory leak issues. The use-after-free occurs in the following race: T1 (blkcg_activate_policy): - Successfully allocates pd for blkg1 (loop0->queue, blkcgA) - Fails to allocate pd for blkg2 (loop0->queue, blkcgB) - Enters the enomem rollback path to release blkg1 resources T2 (blkcg deletion): - blkcgA is deleted concurrently - blkg1 is freed via blkg_free_workfn() - blkg1->pd is freed T1 (continued): - Rollback path accesses blkg1->pd->online after pd is freed - Triggers use-after-free In addition, blkg_free_workfn() frees pd before removing the blkg from q->blkg_list. This allows blkcg_activate_policy() to allocate a new pd for a blkg that is being destroyed, leaving the newly allocated pd unreachable when the blkg is finally freed. Fix these races by extending blkcg_mutex coverage to serialize blkcg_activate_policy() rollback and blkg destruction, ensuring pd lifecycle is synchronized with blkg list visibility. | ||||
| CVE-2026-93165 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/chrome: sensorhub: Fix memory overread in ring handler `max_response` and `sensor_num` are read from different EC commands: - `max_response` is from cros_ec_get_proto_info(). ec_dev->max_response = info->max_response_packet_size - sizeof(struct ec_host_response); - `sensor_num` is from cros_ec_get_sensor_count(). sensor_num = cros_ec_get_sensor_count(ec); With a malfunctioning EC firmware, it is possible that the `msg->insize` (i.e., `fifo_info_length` in the context) could be clamped in cros_ec_cmd_xfer() because `msg->insize` is greater than `max_response`. int fifo_info_length = sizeof(struct ec_response_motion_sense_fifo_info) + sizeof(u16) * sensorhub->sensor_num; This means the number of read bytes could be less than expected. As a result, the subsequent memcpy() in cros_ec_sensorhub_ring_handler() overreads the `resp->fifo_info` buffer. Check the return value of cros_ec_cmd_xfer_status() and abort if the number of bytes read does not match the expected length. | ||||
| CVE-2026-93189 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: core: quiesce input in hid_hw_stop() to prevent use-after-free A driver's probe calls hid_device_io_start() to enable input delivery, then fails at a later initialization step and unwinds via hid_hw_stop(). The unwind frees struct hidraw via hidraw_disconnect() while in-flight HID reports may still be running on another CPU, dereferencing the freed object through hidraw_report_event(). syzbot reports the resulting use-after-free for the corsair-psu HID driver. Edward Adam Davis posted a per-driver fix for corsair-psu that adds an explicit hid_device_io_stop() before hid_hw_stop() in the probe error path ("hwmon: prevent packets from going to driver for probe", 2026-04-28). Auditing the tree shows 15 drivers call hid_device_io_start(); 7 also call hid_device_io_stop() and 8 do not: drivers calling hid_device_io_start() without a matching hid_device_io_stop() before hid_hw_stop(): drivers/hwmon/corsair-psu.c (fix posted by Edward) drivers/hwmon/corsair-cpro.c drivers/hwmon/nzxt-kraken3.c drivers/hwmon/nzxt-smart2.c drivers/hwmon/gigabyte_waterforce.c drivers/hid/hid-logitech-dj.c drivers/hid/hid-nintendo.c drivers/hid/hid-mcp2221.c Roughly half of all callers of the API are exposed. Centralize the quiesce in hid_hw_stop() so callers do not have to remember the matching stop: if a driver has left hdev->io_started true on entry, call hid_device_io_stop() before hid_disconnect(). For the 7 drivers that already call hid_device_io_stop() correctly, hdev->io_started is false on entry, the guard short-circuits, and behavior is unchanged. No Fixes: tag because the affected drivers gained their hid_device_io_start() calls independently over years; the bug is a class-wide API misuse rather than a regression from one commit. | ||||
| CVE-2026-90103 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4.2: fix LAYOUTSTATS send buffer exhaustion encode_layoutstats_maxsz budgets XDR_QUADLEN(PNFS_LAYOUTSTATS_MAXSIZE), i.e. 256 bytes, for the layoutupdate4 body written by the layout driver. The flexfiles record can exceed that. ff_layout_encode_ff_layoutupdate() emits, per data server, a netaddr4, an nfs_fh4, two ff_io_latency4, an nfstime4 and a bool. A data server whose filehandle is NFS_MAXFHSIZE bytes long already accounts for 132 of those bytes, and the two ff_io_latency4 at 64 bytes each, the nfstime4 and the bool add a further 144, so the body passes 256 bytes before the netaddr4 is encoded at all. encode_layoutstats() additionally writes the deviceid4 and the layoutupdate4 lou_type word, neither of which the macro accounts for. The filehandle and the address are both chosen by the server, through LAYOUTGET and GETDEVICEINFO, so it can drive the encoder past the end of the send buffer. xdr_reserve_space() returns NULL once that happens, and the two ff_layout_encode_io_latency() calls run with dss_info->mirror->lock held, so a NULL return there leaves the lock permanently held. Raise PNFS_LAYOUTSTATS_MAXSIZE to 384 so that the record fits inside the reservation. | ||||
| CVE-2026-90143 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: kcm: Hold RCU read lock while running BPF parser kcm_parse_func_strparser() calls bpf_prog_run_pin_on_cpu() which prevents CPU migration, but does not establish an RCU read-side critical section. Consequently, BPF map operations can trigger WARN_ON_ONCE(!bpf_rcu_lock_held()) when called from the KCM strparser program. Hold the RCU read lock while running the program. | ||||
| CVE-2026-90240 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Flush context cache with correct SID when tearing down aliases domain_context_clear_one() and device_pasid_table_teardown() are both invoked once per DMA alias of a device. Each function locates the context entry using the bus/devfn pair provided by the pci_for_each_dma_alias() callback, then calls intel_context_flush_no_pasid(), which constructs a device-selective context-cache invalidation from info->bus and info->devfn (that is, always the requester ID of the device itself). As a result, for every alias other than the device’s own RID, the context entry that was just cleared in memory is never invalidated in the context cache. Hardware may continue using that stale cached entry. In the scalable-mode teardown path, intel_pasid_free_table() can then free the PASID directory still referenced by that stale entry, allowing the IOMMU to walk freed memory. Fix this by passing the source ID of the entry being torn down to intel_context_flush_no_pasid(), instead of deriving it from @info. | ||||
| CVE-2026-90256 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: use proto_lock for l2cap_data to fix l2cap_disconn_ind hci_conn::l2cap_data is accessed without locks in l2cap_disconn_ind via hci_conn_timeout (disc_work) -> hci_proto_disconn_ind -> l2cap_disconn_ind. This is UAF if the l2cap_conn is deleted concurrently. disc_work is disabled sync in hci_conn_del(), so we cannot take hci_dev_lock in disc_work. Fix by using proto_lock to guard l2cap_data, in addition to hdev->lock which is held in other access paths. | ||||
| CVE-2026-90309 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: Hold CQ references when processing EQ events EQ handlers look up CQs from dev->cq_xa and invoke CQ completion or error callbacks outside the xarray lock. erdma_destroy_cq() can erase the CQ from the xarray and free its queue buffer and doorbell record while a previously scheduled EQ handler is still using the CQ. Add a CQ refcount and take a reference under the xarray lock with refcount_inc_not_zero(). Remove the CQ from the xarray before dropping the destroy-path reference, then wait for in-flight EQ users before releasing CQ resources. | ||||
| CVE-2026-90111 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ip6mr: do not clone dst in ip6mr_cache_report() IPv6 input attaches a non-refcounted (NOREF) dst to skbs under RCU. When an ingress multicast packet misses MFC lookup, ip6mr_cache_unresolved() places the skb onto the unresolved queue, escaping the receive-side RCU grace period. If the underlying route is deleted and freed, and the MFC queue is later resolved with a wrong parent interface, ip6_mr_forward() invokes ip6mr_cache_report(..., MRT6MSG_WRONGMIF), which executes dst_clone(skb_dst(pkt)) on the freed dst entry, triggering a slab use-after-free. Report packets queued to mroute6_sk (a raw socket) and netlink notifications do not require an attached dst entry. Fix this by: 1. Removing dst_clone() in ip6mr_cache_report() and ensuring report skbs do not hold a dst. 2. Dropping skb_dst before queuing unresolved skbs in ip6mr_cache_unresolved(), matching the fact that multicast forwarding resolves outgoing routes anew via ip6_route_output(). | ||||
| CVE-2026-90120 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v5: Check get_logical_index() return value in MADT IAFFID parsing In gic_acpi_parse_iaffid() a given MADT GICC entry might not correspond to a logical cpu recognized by the kernel, resulting in the cpu variable initialization to an error value. Currently, the get_logical_index() return value is not checked for failure, which might result in out-of-bounds memory corruption while trying to index a per_cpu variable array. Add a check to evaluate get_logical_index() return value. | ||||
| CVE-2026-90161 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: erofs: fix interlaced ztailpacking pclusters On-disk sizes of interlaced pclusters should be block-aligned, and ztailpacking interlaced pclusters should be invalid at all. Currently, mkfs.erofs won't generate any interlaced pcluster with ztailpacking enabled, so this doesn't affect any existing valid filesystems. However, crafted images can contain invalid interlaced ztailpacking pclusters, resulting in an out-of-bounds read from a kmap'd page and copying irrelevant kernel memory into userspace-visible page cache. | ||||
| CVE-2026-90379 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: Add PCIe AER handler support to prevent system crash When an AER error occurs and the bus is hung, the register reads return 0xFFFFFFFF, causing the DMA queue state to be corrupted and resulting in an invalid memory access when accessing q->desc[] or q->entry[]. Unable to handle kernel paging request at virtual address ffffffc01099eac0 pc : mt76_dma_add_buf+0x124/0x188 [mt76] lr : mt76_dma_rx_fill+0x11c/0x1d8 [mt76] sp : ffffffc016d9bbf0 x29: ffffffc016d9bc10 x28: 0000000000000000 x27: 0000000000000000 x26: ffffffb7855e50b8 x25: ffffffb80d04f000 x24: 0000000000000000 x23: 0000000000000ec0 x22: ffffffb796803648 x21: ffffffb796801f80 x20: ffffffb7968035f8 x19: 0000000000000ec0 x18: 0000000000000000 x17: 000000004ec00000 x16: 000000000ec00000 x15: ffffffc01099eac0 x14: 000000004ec00000 x13: 00000000ffc5a000 x12: ffffffc016d9bc32 x11: 00000000ffffffff x10: 0000000000000002 x9 : 0000000000000000 x8 : 000000000000b4ac x7 : 0000000000000a20 x6 : ffffffb6c1806400 x5 : 0000000000000000 x4 : ffffffb80d04f000 x3 : 0000000000000000 x2 : 0000000000000001 x1 : 000000000ec04000 x0 : ffffffb7968035f8 Call trace: mt76_dma_add_buf+0x124/0x188 [mt76 (HASH:1029 4)] mt76_dma_rx_reset+0xe8/0xfc [mt76 (HASH:1029 4)] mt7921_wpdma_reset+0x188/0x1b0 [mt7921e (HASH:ee48 5)] mt7921e_mac_reset+0x128/0x418 [mt7921e (HASH:ee48 5)] mt7921_mac_reset_work+0xac/0x1a8 [mt7921_common (HASH:f721 6)] process_one_work+0x188/0x514 worker_thread+0x12c/0x300 kthread+0x140/0x1fc ret_from_fork+0x10/0x30 Fix the invalid memory access by validating the DMA index read from the hardware before it is used as a queue index. An out-of-range value, such as the 0xFFFFFFFF returned while the bus is hung, is now clamped so it can no longer corrupt q->head or q->tail. In addition, check the bus_hung flag in mt7921_mac_reset_work() before attempting the reset sequence, reject MCU messages while the bus is hung, and install no-op bus operations when an unrecoverable AER error is detected, preventing further invalid hardware accesses. Due to hardware limitations - such as the lack of a connected hardware reset pin or the absence of host re-probe functionality - affected Wi-Fi devices may not fully recover to a normal operational state after certain errors, even with AER enabled. | ||||
| CVE-2026-93177 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/pm/powerplay: bounds-check voltage index in Vega10 lookup vddInd, vddciInd and mvddInd from VBIOS-parsed tables index into vddc, vddci and vddmem lookup tables without bounds checks across nine sites. Return -EINVAL when any index is out of range. | ||||
| CVE-2026-85680 | 2 Ultimatemember, Wordpress | 2 Ultimate Member, Wordpress | 2026-09-20 | 8.8 High |
| The Ultimate Member WordPress plugin before 2.13.1 does not escape a value derived from user supplied profile names before outputting it in the page title, and decodes HTML entities in it after its own sanitisation has already run, allowing unauthenticated attackers who register an account to store JavaScript that will execute when any visitor, including an administrator, views their profile. | ||||
| CVE-2026-90223 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: bound SNL TLV parsing to the skb and add length checks nfc_llcp_recv_snl() walked the SNL TLV list using a u16 offset/length pair derived from skb->len, without bounding reads to the actual skb data. Three problems followed: - For a short frame (skb->len < LLCP_HEADER_SIZE), tlv_len underflowed. - The per-TLV header (type, length) was read without checking that two bytes remained. - A declared TLV length could run past the end of the buffer, and an SDREQ with length == 0 made "service_name_len = length - 1" underflow (size_t), driving an out-of-bounds read in the following strncmp() / nfc_llcp_sock_from_sn(). The SDRES case likewise read tlv[2]/tlv[3] without a length check. A nearby NFC device can reach this without authentication; LLCP link activation happens automatically after NFC-DEP. Walk the TLV list by pointer, bounded by skb_tail_pointer() over the linear skb data, and validate each TLV declared length before use. Add explicit length checks for SDREQ (>= 1) and SDRES (exactly 2). Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-90227 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme/ioctl: check SUBMIT_IO with nvme_cmd_allowed() Unlike IO_CMD / IO64_CMD, NVME_IOCTL_SUBMIT_IO never calls nvme_cmd_allowed(). Unprivileged callers can thus issue I/O on a partition device or write through a read-only file descriptor. Pass flags and open_for_write through and reject disallowed commands with -EACCES. | ||||