Export limit exceeded: 417580 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417580 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89503 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix subbuf resize race with ring_buffer_alloc_read_page() ring_buffer_alloc_read_page() is racy with ring_buffer_subbuf_order_set, it can allocate a reader page with an outdated order. This isn't a big issue, the user can still re-allocate a new reader page and try again. However, what is more problematic is if the value of subbuf_order changes in the middle of ring_buffer_alloc_read_page(). In that case, bpage->order might not match the actual allocated memory. Use bpage->order for the allocation to prevent this race. | ||||
| CVE-2026-89500 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Make cpu_buffer::free_page a buffer_data_read_page Discarding a cached reader page after a concurrent ring buffer resize uses the new global subbuf_order for the free_pages() call. This mismatched order may crashes the kernel or leaks memory because the cached page was allocated under the old size. Save the actual free_page order alongside the page address to ensure we always refer to the correct value and do not rely on the potentially stalled cpu_buffer->subbuf_order value. The simplest is to make free_page a buffer_data_read_page which already covers exactly what we need: a page address and a page order. | ||||
| CVE-2026-89445 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix UAF in selftest IOPF reporting IOMMUFD selftest TRIGGER_IOPF borrows an attach handle from group->pasid_array without synchronizing against PASID detach, then a concurrent iommu_report_device_fault() can dereference that borrowed handle's domain pointer after the detach erases the handle and frees the backing struct iommufd_attach_handle. TRIGGER_IOPF then dereferences the freed handle, causing a UAF. Fix by adding a iopf_rwsem in mock_dev to follow the expected design of a real driver. Hold its read side across the whole iommu_report_device_fault() call, and its write side around every path that attaches, detaches, or replaces a device domain. This can block new reports and drains in-flight reports before an old attach handle or the IOPF fault parameter can be removed. Also take the write side while registering a mock device, since it can invoke the mock driver's default-domain attach callback. | ||||
| CVE-2026-81015 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/pmc: Fix LPS0 and debugfs leaks when STB init fails amd_pmc_probe() registers the LPS0 s2idle handler with acpi_register_lps0_dev() and creates the driver's debugfs directory before calling amd_stb_s2d_init(), which is the last step in probe that can fail. When amd_stb_s2d_init() fails (for example the S2D telemetry region cannot be ioremapped on a long-running system, or the SMU rejects the S2D setup) the error path only calls pci_dev_put() and returns. This leaves amd_pmc_s2idle_dev_ops on the global lps0_s2idle_devops_head list and leaks the debugfs directory, while the devm-managed resources backing the handler are torn down. Reloading the module then walks the corrupted list in acpi_register_lps0_dev() and hits: list_add corruption. next->prev should be prev, but was NULL. kernel BUG at lib/list_debug.c:29! acpi_register_lps0_dev+0x44/0x80 amd_pmc_probe+0x224/0x380 [amd_pmc] platform_probe+0x67/0x90 Even without a reload, the stale registration means the next s2idle transition calls into torn-down driver state. Unwind the debugfs directory and the LPS0 registration on the amd_stb_s2d_init() error path. acpi_unregister_lps0_dev() is safe to call unconditionally here: it is guarded on the same conditions as acpi_register_lps0_dev(), which is exactly what amd_pmc_remove() already relies on. | ||||
| CVE-2026-80939 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: pci: add .shutdown callback to stop rfkill polling on reboot Since the hardware rfkill polling was introduced, arm64 platforms can panic with an asynchronous SError during warm reboot: SError Interrupt on CPU8, code 0x00000000be000011 -- SError Workqueue: events_power_efficient rfkill_poll [rfkill] rtw89_pci_ops_read8+0x94/0x160 [rtw89_pci] rtw89_core_rfkill_poll+0x50/0x1e0 [rtw89_core] rtw89_ops_rfkill_poll+0x40/0x68 [rtw89_core] ieee80211_rfkill_poll+0x3c/0x70 [mac80211] cfg80211_rfkill_poll+0x40/0x2a0 [cfg80211] rfkill_poll+0x30/0x88 [rfkill] Kernel panic - not syncing: Asynchronous SError Interrupt On the reboot path the kernel only runs device_shutdown(), which calls each driver's .shutdown callback; .remove is not invoked. The rtw89 PCI driver had no .shutdown callback, so nothing stopped the rfkill polling work while the platform was tearing the PCIe link down. Once the link is gone, the next MMIO read from the poll handler targets a non-responding device and is reported as a fatal asynchronous SError on arm64. Add rtw89_pci_shutdown(), wired to all rtw89 PCI device drivers, which sets a new RTW89_FLAG_SHUTDOWN flag (mirroring the USB RTW89_FLAG_UNPLUGGED pattern). When the flag is set, rtw89_ops_rfkill_poll() returns early, so no MMIO read is issued to the chip after shutdown begins and the SError no longer occurs. This does not call the full .remove path from .shutdown, to keep the shutdown handler minimal and avoid running the non-idempotent teardown twice. | ||||
| CVE-2026-80926 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in oplock break notification smb2_oplock_break_noti() reads opinfo->conn without any lock and dereferences it after two allocations which may sleep. When the durable handle owning the oplock is disconnected, session_fd_check() clears opinfo->conn and drops its conn reference under ci->m_lock, and the last ksmbd_conn_put() frees the connection. A break triggered by another connection that races with the teardown can then resurrect the freed connection: ksmbd_conn_get() is a plain atomic_inc, and the queued break work later dereferences the stale conn via ksmbd_conn_write(), a use-after-free reachable by any authenticated client holding a durable batch oplock. Thread the caller's inode into the notification path instead of taking a new reference on it. Every caller of oplock_break() already holds a live ksmbd_file (or an explicit ksmbd_inode_lookup_lock() reference, in the parent lease break paths) on the inode that owns the break target's oplock list, so ci cannot be freed during the call, and its lock can be taken without dereferencing opinfo->o_fp, which a concurrent close may free. Select and pin the connection under ci->m_lock, the same lock session_fd_check() and ksmbd_reopen_durable_fd() use to update opinfo->conn, so a concurrent detach either loses the race to the clear or keeps the connection alive until the notification work releases it. Transfer the reference to the work item and release it on allocation failures. | ||||
| CVE-2026-80834 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: sun8i-ce - Remove crypto_rng interface Since the crypto_rng interface for hardware PRNGs is unused and is redundant with hwrng and the actual Linux RNG, it's being phased out. Most drivers for it were already removed. Go ahead and remove the sun8i-ce support which is one of the only remaining ones. Note that the sun8i-ce support for hwrng remains in place. That is the interface that actually matters. As usual for crypto_rng, this driver was also buggy: its ->generate() function had a use-after-free vulnerability due to using wait_for_completion_interruptible_timeout() without handling shutting down the DMA operation if a signal is sent. There's no point in fixing this separately only to remove the code anyway, so this commit is marked with Fixes and Cc stable. | ||||
| CVE-2026-80833 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: sun8i-ss - Remove crypto_rng interface Since the crypto_rng interface for hardware PRNGs is unused and is redundant with hwrng and the actual Linux RNG, it's being phased out. Most drivers for it were already removed. Go ahead and remove the sun8i-ss support which is one of the only remaining ones. As usual for crypto_rng, this driver was also buggy: its ->generate() function had a use-after-free vulnerability due to using wait_for_completion_interruptible_timeout() without handling shutting down the DMA operation if a signal is sent. Also, it had a buffer overread bug in the line 'memcpy(ctx->seed, d + dlen, ctx->slen);'. There's no point in fixing these bugs separately only to remove the code anyway, so this commit is marked with Fixes and Cc stable. | ||||
| CVE-2026-80521 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Unlink scc_entry in unix_del_edge(). Kyle Zeng reported that GC could free a dead SCC partially. The scenario is as follows: 1) Create two SCCs: X -. A <-> B ^--' 2) Run the following concurrently: 2-1) send() sk-B to sk-B from sk-X 2-2) close() both A and B At 2-1), there is a small window where unix_add_edges() publishes a new edge (B <-> B) to GC but its skb is not queued by skb_queue_tail(). If 2-2) completes before skb_queue_tail() and GC is triggered, it judges A <-> B as dead, but B is not freed because GC cannot collect the not-yet-queued skb holding the B <-> B edge. X -. A <-> B -. This edge is visible ^--' ^..' but skb is not This itself is not a problem since the next GC run will judge B as dead as well and free it finally. X -. A <.> B -. ^--' ^--' However, X's SCC forces the next GC to call unix_walk_scc_fast(), and it iterates over A through B's scc_entry. Let's unlink scc_entry before freeing the vertex in unix_del_edge(). | ||||
| CVE-2026-74521 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: use memcmp() to compare ClientGUIDs ClientGUID is a fixed-size binary value and can contain embedded NUL bytes. strncmp() stops comparing at the first NUL byte, so different ClientGUID values can incorrectly be treated as equal. Use memcmp() in SMB3 multichannel session binding and FSCTL_VALIDATE_NEGOTIATE_INFO to compare all SMB2_CLIENT_GUID_SIZE bytes. | ||||
| CVE-2026-74460 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: ems_usb: validate CPC message lengths ems_usb_read_bulk_callback() walks CPC messages packed in one USB receive buffer. Check that each declared message fits in the URB payload. Also require the type-specific payload to cover the fields used by the CAN, state, error and overrun handlers. | ||||
| CVE-2026-74289 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: fib: Don't dump dying fib_info in fib_leaf_notify(). syzbot reported use-after-free in nsim_fib4_prepare_event(). [0] The problem is that the following functions call fib_info_hold() / refcount_inc() while dumping fib_info under RCU, which is unsafe. * mlxsw_sp_router_fib4_event() * rocker_router_fib_event() * nsim_fib4_prepare_event() refcount_inc_not_zero() must be used, but it would be too late there. Let's guarantee the lifetime of fib_info in fib_leaf_notify(). Note that IPv6 does not need the corresponding change since fib6_table_dump() holds fib6_table.tb6_lock. [0]: refcount_t: addition on 0; use-after-free. WARNING: lib/refcount.c:25 at refcount_warn_saturate+0x9f/0x110 lib/refcount.c:25, CPU#0: kworker/u8:15/3420 Modules linked in: CPU: 0 UID: 0 PID: 3420 Comm: kworker/u8:15 Not tainted syzkaller #0 PREEMPT_{RT,(full)} Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026 Workqueue: netns cleanup_net RIP: 0010:refcount_warn_saturate+0x9f/0x110 lib/refcount.c:25 Code: eb 66 85 db 74 3e 83 fb 01 75 4c e8 1b f1 22 fd 48 8d 3d 84 cb f1 0a 67 48 0f b9 3a eb 4a e8 08 f1 22 fd 48 8d 3d 81 cb f1 0a <67> 48 0f b9 3a eb 37 e8 f5 f0 22 fd 48 8d 3d 7e cb f1 0a 67 48 0f RSP: 0018:ffffc9000f2c7270 EFLAGS: 00010293 RAX: ffffffff84a18858 RBX: 0000000000000002 RCX: ffff888032ff9ec0 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff8f9353e0 RBP: 0000000000000000 R08: ffff888032ff9ec0 R09: 0000000000000005 R10: 0000000000000100 R11: 0000000000000004 R12: ffff8880570cc000 R13: dffffc0000000000 R14: ffff88802b40563c R15: ffff8880570cc000 FS: 0000000000000000(0000) GS:ffff888126173000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb1f4d5d000 CR3: 000000006072a000 CR4: 00000000003526f0 Call Trace: <TASK> __refcount_add include/linux/refcount.h:-1 [inline] __refcount_inc include/linux/refcount.h:366 [inline] refcount_inc include/linux/refcount.h:383 [inline] fib_info_hold include/net/ip_fib.h:629 [inline] nsim_fib4_prepare_event drivers/net/netdevsim/fib.c:930 [inline] nsim_fib_event_schedule_work drivers/net/netdevsim/fib.c:1000 [inline] nsim_fib_event_nb+0x1055/0x1240 drivers/net/netdevsim/fib.c:1043 call_fib_notifier+0x45/0x80 net/core/fib_notifier.c:25 call_fib_entry_notifier net/ipv4/fib_trie.c:90 [inline] fib_leaf_notify net/ipv4/fib_trie.c:2176 [inline] fib_table_notify net/ipv4/fib_trie.c:2194 [inline] fib_notify+0x36b/0x5e0 net/ipv4/fib_trie.c:2217 fib_net_dump net/core/fib_notifier.c:70 [inline] register_fib_notifier+0x184/0x360 net/core/fib_notifier.c:108 nsim_fib_create+0x85d/0x9f0 drivers/net/netdevsim/fib.c:1596 nsim_dev_reload_create drivers/net/netdevsim/dev.c:1604 [inline] nsim_dev_reload_up+0x374/0x7c0 drivers/net/netdevsim/dev.c:1058 devlink_reload+0x501/0x8d0 net/devlink/dev.c:475 devlink_pernet_pre_exit+0x1ff/0x420 net/devlink/core.c:558 ops_pre_exit_list net/core/net_namespace.c:161 [inline] ops_undo_list+0x187/0x940 net/core/net_namespace.c:234 cleanup_net+0x56e/0x800 net/core/net_namespace.c:702 process_one_work kernel/workqueue.c:3314 [inline] process_scheduled_works+0xb5d/0x1860 kernel/workqueue.c:3397 worker_thread+0xa53/0xfc0 kernel/workqueue.c:3478 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> | ||||
| CVE-2026-74258 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Guard __get_user acesss with access_ok for uprobe_multi data As reported by sashiko [1] we need to use access_ok to check the user space data bounds before we use __get-user to get it. [1] https://lore.kernel.org/bpf/20260610145235.CB1441F00893@smtp.kernel.org/ | ||||
| CVE-2026-72496 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 9.2 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Proper rollback if the ioremap fails bnxt_qplib_alloc_dpi returns success even if ioremap fails. Add the proper rollback when the ioremap fails and return -ENOMEM status. | ||||
| CVE-2026-72485 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: coresight: platform: defer connection counter increment until alloc succeeds coresight_add_out_conn() increments nr_outconns before calling devm_krealloc_array() and again before devm_kmalloc(). If either allocation fails, the counter is already bumped while the corresponding array entry is NULL or uninitialized garbage. coresight_add_in_conn() has the same problem with nr_inconns and devm_krealloc_array(). In both cases the probe returns -ENOMEM, which causes coresight_get_platform_data() to call coresight_release_platform_data() for cleanup. That function iterates up to nr_outconns (or nr_inconns) entries and dereferences each pointer unconditionally, hitting the NULL or garbage entry and panicking instead of failing gracefully. Fix by moving the counter increments to after all allocations succeed, so the struct is always consistent on any error path. | ||||
| CVE-2026-72463 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: Fix dev use-after-free in xfrm async resumption xfrm async resumption hold skb->dev refcnt until after transport_finish. However, xfrm_rcv_cb may modify skb->dev to tunnel dev without taking device reference, such as vti_rcv_cb. The subsequent async resumption will decrement the tunnel device's reference count, which lead to uaf of tunnel dev and refcnt leak of orig dev as below: unregister_netdevice: waiting for vti1 to become free. Usage count = -2 Stash the original skb->dev to fix refcnt imbalance. The new skb->dev set by xfrm_rcv_cb can race with device teardown. Extend rcu protection over xfrm_rcv_cb and transport_finish to prevent races. | ||||
| CVE-2026-72413 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sctp: fix err_chunk memory leaks in INIT handling When sctp_verify_init() encounters unrecognized parameters, it allocates an err_chunk to report them. However, this chunk is leaked in several code paths: 1. In sctp_sf_do_5_1B_init(), if security_sctp_assoc_request() fails after sctp_verify_init() has populated err_chunk, the function returns immediately without freeing it. 2. In sctp_sf_do_unexpected_init(), the same leak occurs on the security_sctp_assoc_request() failure path. 3. In sctp_sf_do_unexpected_init(), on the success path after copying unrecognized parameters to the INIT-ACK, the function returns without freeing err_chunk, unlike sctp_sf_do_5_1B_init() which properly frees it. Fix all three leaks by adding sctp_chunk_free(err_chunk) calls before returning in the error paths and on the success path in sctp_sf_do_unexpected_init(). | ||||
| CVE-2026-72402 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Mask pseudo pointer values in verifier logs print_bpf_insn() masks ldimm64 immediates for pointer-bearing pseudo sources when pointer leaks are not allowed, but the mask only covers BPF_PSEUDO_MAP_FD and BPF_PSEUDO_MAP_VALUE. BPF_PSEUDO_MAP_IDX, BPF_PSEUDO_MAP_IDX_VALUE, and BPF_PSEUDO_BTF_ID can also be resolved to kernel pointer values before the verifier log prints the instruction. Include them in the existing pointer classification so the log prints 0x0 instead of the rewritten address. | ||||
| CVE-2026-72315 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix busy dentry warning on unmount after DIO Commit c68337442f03 ("cifs: Fix busy dentry used after unmounting") fixed the issue in cifs where deferred close of a file led to a dentry reference count not being released in umount, by flushing deferredclose_wq in cifs_kill_sb() to solve it. However, the cifs DIO path suffers from the same busy-dentry problem caused by a delayed dentry reference-count release: [dio] [cifsd] [close + umount] netfs_unbuffered_write_iter_locked ... cifs_demultiplex_thread netfs_unbuffered_write cifs_issue_write netfs_wait_for_in_progress_stream [1] ... netfs_write_subrequest_terminated netfs_subreq_clear_in_progress netfs_wake_collector // wake [1] netfs_put_subrequest netfs_put_request queue_work(system_dfl_wq, xxx) [2] // dio write return cifs_close _cifsFileInfo_put // cfile->count 2->1 --cfile->count [3] // umount cifs_kill_sb kill_anon_super // warning triggered! shrink_dcache_for_umount [4] [system_dfl_wq] [5] netfs_free_request ... _cifsFileInfo_put // cfile->count 1->0 --cfile->count queue_work(fileinfo_put_wq, xxx) [fileinfo_put_wq] [6] cifsFileInfo_put_work cifsFileInfo_put_final dput If the umount path is triggered before [5], it results warning: BUG: Dentry 00000000eab1f070{i=9a917b66ae404fec,n=test} still in use (1) [unmount of cifs cifs] The existing per-inode ictx->io_count wait in cifs_evict_inode() does not help: it lives in the inode eviction path, which runs after shrink_dcache_for_umount() has already warned about the busy dentries. Fix it by adding a per-superblock outstanding-rreq counter that is incremented in cifs_init_request() and decremented in cifs_free_request(). In cifs_kill_sb(), before kill_anon_super(), wait for this counter to reach 0 - which guarantees that all cleanup_work for this sb have run and thus all relevant cfile puts are queued on fileinfo_put_wq or serverclose_wq. Then drain the workqueue so the dentry refs are dropped. This is a targeted wait, not a flush of the system-wide system_dfl_wq. | ||||
| CVE-2026-68289 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix integer overflow in tipc_recvmsg() and tipc_recvstream() In tipc_recvmsg(), the copy length is computed as: copy = min_t(int, dlen - offset, buflen); buflen is size_t but min_t(int, ...) casts it to int. When buflen exceeds INT_MAX (e.g. 0xFFFFFFFF via io_uring provided buffers), it wraps negative, wins the comparison, and the negative copy length propagates to simple_copy_to_iter() where int-to-size_t promotion makes it SIZE_MAX, triggering a WARN_ON. tipc_recvstream() has the same pattern. Kernel panic - not syncing: kernel: panic_on_warn set ... RIP: 0010:simple_copy_to_iter+0x9e/0xd0 (net/core/datagram.c:521) Call Trace: __skb_datagram_iter+0x123/0x8b0 (net/core/datagram.c:402) skb_copy_datagram_iter+0x77/0x1a0 (net/core/datagram.c:534) tipc_recvmsg+0x3d7/0xe80 (net/tipc/socket.c:1934) io_recvmsg+0x47e/0xda0 Fix by changing min_t(int, ...) to min_t(size_t, ...) in both functions. The result is always <= (dlen - offset), which is bounded by TIPC maximum message size (0x1ffff bytes), so the implicit narrowing on assignment to int copy is always safe. | ||||