Export limit exceeded: 16593 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 22926 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 10524 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (10524 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93176 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix dangling pointer in plane reset function amdgpu_dm_plane_drm_plane_reset() frees the old state before allocating a new one. If kzalloc() fails, the function returns without updating the state pointer, leaving a dangling pointer to already freed memory. Fix this by allocating the new state first. On allocation failure, the old state remains untouched and the function safely returns. Found by Linux Verification Center (linuxtesting.org) with SVACE. [adjust for movement around current amd-staging-drm-next] | ||||
| CVE-2026-93185 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: rt700-sdw: always drain jack work on remove rt700_sdw_remove() drains jack_detect_work and jack_btn_check_work only when rt700->hw_init is true. That state bit is cleared by rt700_update_status() when the SoundWire slave becomes UNATTACHED, but a jack work item can already have been queued by rt700_interrupt_callback() or rt700_jack_init() while the device was initialized. Do not use hw_init as the remove-time guard for draining these work objects. The delayed works are initialized during rt700_init(), so remove can cancel them unconditionally and pair the object lifetime with the codec-private data lifetime instead of a mutable hardware state bit. This issue was found by our static analysis tool and then confirmed by manual review of the SoundWire status, interrupt and remove paths. The remove path should drain work based on whether the work object exists, not on a runtime hardware state bit that can change after the work was queued. A QEMU PoC queued jack_detect_work, simulated SDW_SLAVE_UNATTACHED, and then entered remove. DEBUG_OBJECTS reported an active timer/work object associated with the rt700 jack work path after remove skipped the cancel. This is sent as an RFC because the practical trigger depends on SoundWire core remove ordering after an UNATTACHED status update. If remove cannot run after hw_init has been cleared while jack work is still pending, this is a defensive lifecycle cleanup rather than a reachable race on current systems. | ||||
| CVE-2026-93163 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwrng: core - fix rng list on registration error hwrng_register(rng) does the following: 1. Checks if rng has name and read methods set 2. Checks if the name already exists 3. Adds rng to global rng_list 4. May try to set rng to current_rng If step 4 fails, it returns an error. However, it does not remove the rng from rng_list, causing a dangling reference which can result in use-after-free if the caller frees rng, since registration failed. Add a list_del_init() cleanup step. | ||||
| CVE-2026-93200 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i3c: master: Fix use-after-free of master->this sysfs attribute callbacks for the master controller device dereference master->this. However, master->this is freed in i3c_master_detach_free_devs() before the master device itself is released. As a result, sysfs accesses can dereference a freed master->this pointer, leading to a use-after-free. Keep master->this alive until i3c_masterdev_release(), which is called after the master device and its sysfs state are being torn down. Do not free master->this as part of the normal device detach path. On the error path in i3c_master_set_info(), reset master->this and bus.cur_master to NULL before freeing the allocated device. | ||||
| CVE-2026-93131 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-privacy: Fix race condition Accessing priv->features_present needs to happen with the list mutex being held, otherwise priv can be freed at any moment. | ||||
| CVE-2026-93134 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: printk: Fix possible console use-after-free When emitting a record via legacy printing, it is possible that a handover to another legacy printing context occurs. When a context has performed a handover, the console SRCU read lock is released and the pointer to the console struct might now be invalid. Therefore, after calling nbcon_legacy_emit_next_record() or console_emit_next_record(), it is necessary to check if a handover occurred _before_ further @con usage. Sashiko pointed out that console_flush_one_record() was not doing this. In console_flush_one_record(), after emitting a record, move the further usage of @con after the handover check. | ||||
| CVE-2026-93141 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: r8a66597: avoid double free of ep0_req in probe error path If usb_add_gadget_udc() fails, r8a66597_probe() jumps to err_add_udc and frees ep0_req, then falls through to clean_up2 where ep0_req is freed again when it is non-NULL. Remove the redundant free from err_add_udc and keep the cleanup in clean_up2 so the request is released exactly once. Issue found using a prototype static analysis tool and confirmed by code review. | ||||
| CVE-2026-93162 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: qat - cancel work on re-enable SR-IOV timeout The QAT reset worker queues SR-IOV reenable work using a work_struct and completion embedded in an on-stack adf_sriov_dev_data. If the completion wait times out, the reset worker can return while device_sriov_wq still holds or executes the stack-backed work item. Cancel the work on the device_sriov_wq on timeout before the stack frame unwinds. | ||||
| CVE-2026-93100 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/resctrl: Prevent use-after-free in rdtgroup_kn_put() A struct rdtgroup is reference counted via rdtgroup::waitcount. Callers that need the structure to remain valid across a sleep (while waiting on acquiring rdtgroup_mutex) take a reference with rdtgroup_kn_get() and release it with rdtgroup_kn_put(). The release path is intended to serve as the fallback freer: if the count drops to zero and the group has already been marked RDT_DELETED, rdtgroup_kn_put() frees the structure. The bulk teardown paths free_all_child_rdtgrp() and rmdir_all_sub() resulting from a resctrl directory remove or resctrl fs unmount act as the primary freer: they hold rdtgroup_mutex and free each rdtgroup whose waitcount is zero, otherwise they set RDT_DELETED and leave the freeing to the last waiter. These two freers race. rdtgroup_kn_put() commits waitcount == 0 with atomic_dec_and_test() outside rdtgroup_mutex, then reads rdtgroup::flags. Between those two operations a concurrent caller of free_all_child_rdtgrp() or rmdir_all_sub() (which holds the mutex) can observe waitcount == 0 via atomic_read(), call rdtgroup_remove(), and kfree() the structure. The subsequent read of rdtgroup::flags in rdtgroup_kn_put() is then a use-after-free, and the structure may even be freed twice if the freed memory happens to satisfy the RDT_DELETED flag check. Replace the bare atomic_dec_and_test() with atomic_dec_and_mutex_lock() so that the decrement-to-zero takes rdtgroup_mutex before the count becomes globally visible. The inspection of rdtgroup::flags then runs under the same mutex held by the bulk freers, making the two paths mutually exclusive. The common case where the count does not reach zero remains lock-free. Defer kernfs_unbreak_active_protection() until after the mutex is dropped since kernfs active protections functionally wrap rdtgroup_mutex. Remove resource group, which in turn drops its kernfs reference, after kernfs protection is restored. [ bp: Split the commit messsages into smaller, easier-parseable paragraphs. ] | ||||
| CVE-2026-93108 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/ipoib: Drain RCU callbacks during module teardown IPoIB reclamation completions can be signaled from inside an RCU callback. Teardown can wake before the callback returns and unload ib_ipoib while its code is still executing. Client registration failure can also remove already-added devices and queue callbacks. Wait after client and workqueue teardown. | ||||
| CVE-2026-93110 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Wait for RCU callbacks before unloading ib_core put_gid_ndev() is queued with call_rcu() and implemented in ib_core. Stopping the workqueues does not drain callbacks already queued, so RCU could invoke it after the module code has been unloaded. synchronize_rcu() does not wait for callbacks. Wait for them after all producers have stopped. | ||||
| CVE-2026-93049 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: mtdswap: Avoid freeing registered blktrans device twice In mtdswap_add_mtd(), debugfs setup failure after successful blktrans registration can free mbd_dev twice. add_mtd_blktrans_dev() initializes the blktrans device reference and publishes the disk. Once that succeeds, del_mtd_blktrans_dev() tears the disk down and drops the blktrans reference; when that reference reaches zero, blktrans_dev_release() frees the mtd_blktrans_dev. The debugfs failure path called del_mtd_blktrans_dev(mbd_dev), then fell through the common cleanup label and called kfree(mbd_dev) again. Clear the local pointer after deregistration so the common cleanup can still release the mtdswap state without freeing the blktrans object twice. This issue was found by a static analysis checker and confirmed by manual source review. | ||||
| CVE-2026-93050 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipack: ipoctal: fix UAF, null-ptr-deref, and use-after-free in cleanup on remove Three issues arise when the device is removed while a tty session is still active: 1. UAF of struct ipoctal: the remove callback frees ipoctal via kfree() while tty ops may still access it. Fix by introducing kref-based lifetime management — kref is taken in install() when a tty is opened and released in cleanup() when the tty is finally destroyed; remove() uses kref_put() instead of kfree(). 2. NULL dereference in ipoctal_write_tty(): __ipoctal_remove() frees xmit_buf via tty_port_free_xmit_buf() while a userspace process may still hold the tty fd and call write(). Fix by checking for NULL xmit_buf in ipoctal_write_tty(). 3. UAF in ipoctal_cleanup(): ipack_put_carrier(ipoctal->dev) dereferences ipoctal->dev after the ipack_device has been freed by ipack_device_del(). Fix by caching ipoctal->carrier_owner during probe() and calling module_put() on the cached pointer directly in cleanup(), avoiding any access to ipoctal->dev. Also introduce a "removed" flag in struct ipoctal, set at the start of __ipoctal_remove(), and checked in every tty op that accesses hardware resources (port_activate, write_tty, set_termios, hangup, shutdown). This prevents page faults when devm_ioremap() regions are unmapped after remove() returns. | ||||
| CVE-2026-93058 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: Only fini scheduler after successful init msm_ringbuffer_new() destroys a partially initialized ring through msm_ringbuffer_destroy() when an allocation or scheduler setup step fails. If drm_sched_init() fails before it finishes initializing the scheduler, the failure path still calls drm_sched_fini(). That teardown path assumes the scheduler work items, lists, and workqueue state were initialized. Track successful scheduler initialization and call drm_sched_fini() only after drm_sched_init() returned 0. This issue was found by a static analysis checker and confirmed by manual source review. Patchwork: https://patchwork.freedesktop.org/patch/738905/ | ||||
| CVE-2026-93066 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: x86/mm/pat: Take cpa_lock around large-page collapse Loading and unloading modules concurrently on several CPUs on a KASAN build, with a short delay injected at the CPA page-table lookup to widen the window, faults within minutes: BUG: KASAN: use-after-free in __change_page_attr+0x7cc/0x7e0 Write of size 8 at addr ffff888181139718 by task modprobe ... The buggy address belongs to the physical page: pfn:0x181139 ... page_type: f2(table) cpa_collapse_large_pages() rebuilds a leaf PMD from its 4K PTEs and frees the old PTE-table pages, while __change_page_attr() fetches a PTE pointer from a lockless lookup_address_in_pgd_attr() and writes it with set_pte_atomic() only later. When module text is served from a shared large ROX mapping the two run on the same PMD: CPU A (module load) CPU B (module finalize) ------------------- ----------------------- execmem_make_temp_rw set_memory_nx __change_page_attr split 2M -> 4K table P kpte = &P[i] (lockless) execmem_restore_rox set_memory_rox (CPA_COLLAPSE) cpa_collapse_large_pages rebuild leaf PMD flush_tlb_all pagetable_free(P) set_pte_atomic(kpte, ...) -> writes into freed P P is a page-table page (page_type: table), reused at once, so the write corrupts whatever got the page next: a bad-pte or bad-page splat, or a fatal fault once P has been turned into read-only text. The flush_tlb_all() before the free does not close this: its IPI only serializes against page-table walkers that run with interrupts off (e.g. GUP-fast); the walk in __change_page_attr() runs with interrupts on, so nothing stops it from holding a stale pointer into P. Serialize the collapse - the PMD rebuild, TLB flush and PTE-table free - under cpa_lock, the same lock __change_page_attr() now takes unconditionally since commit ("x86/mm/pat: stop gating cpa_lock on debug_pagealloc_enabled()"), so a concurrent walker can no longer hold a pointer into a table the collapse is about to free. | ||||
| CVE-2026-93068 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix DM I2C teardown race DM I2C adapters can remain visible to userspace while DM teardown is already in progress. A concurrent i2c-dev transfer may then enter amdgpu_dm_i2c_xfer() after the backing DM state has been torn down, leading to a NULL pointer dereference. Create a devres group around the DM I2C adapter lifetime and release it at the start of dm_hw_fini(), before HPD, IRQ, and DM state are torn down. This removes the I2C adapters first and waits for in-flight users to drain before the structures used by amdgpu_dm_i2c_xfer() disappear. This fixes a teardown ordering race seen during device removal: BUG: kernel NULL pointer dereference RIP: amdgpu_dm_i2c_xfer+0x122/0x1c0 [amdgpu] Call Trace: __i2c_transfer i2c_transfer i2cdev_ioctl_rdwr | ||||
| CVE-2026-93072 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/renesas-irqc: Fix generic interrupt chip leak on remove The driver allocates domain generic chips probe. However, on driver removal, the generic chips are not automatically freed when the interrupt domain is removed because the domain flags do not include IRQ_DOMAIN_FLAG_DESTROY_GC. This causes both the domain generic chips structure and the associated generic chips to be leaked. Additionally, the generic chips remain on the global list and may later be accessed by generic interrupt chip suspend, resume, or shutdown callbacks after the driver has been removed, potentially resulting in a use-after-free and kernel crash. Fix the resource leak by setting IRQ_DOMAIN_FLAG_DESTROY_GC on the interrupt domain; this lets the interrupt domain core automatically release all generic chips when irq_domain_remove() is invoked, removing the need for manual cleanup calls in error paths and remove callback. | ||||
| CVE-2026-93080 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix transport device teardown lookup SCMI transport devices are deliberately excluded from normal SCMI bus matching so protocol drivers cannot bind to the internal transport children. However, scmi_device_destroy() uses the same protocol/name lookup to find devices that must be unregistered during channel teardown. Split the match helper so driver matching still skips transport devices, while explicit child lookup can find them for teardown. Use a shared transport-device name prefix macro for both matching and name generation. Since transport-device names are derived from direction and protocol ID, reject duplicate protocol channel setup before creating or finding a transport device. This prevents malformed firmware with duplicate protocol child nodes from reusing an existing transport device and then destroying it when the duplicate IDR insertion fails. | ||||
| CVE-2026-93081 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix SCMI device destroy lifetimes scmi_child_dev_find() drops the reference returned by device_find_child() before returning the scmi_device pointer. A concurrent unregister can then release the device while the destroy path is still using the returned pointer. Make the lookup helper return the device_find_child() reference and keep it until scmi_device_destroy() has finished unregistering the child. Also split device_unregister() in __scmi_device_destroy() so the SCMI bus ID is not made reusable until after device_del() has removed the old scmi_dev.N name from sysfs. This avoids a new SCMI device reusing the same ID while the old device is still registered. The final device release callback is also a possible cleanup path when SCMI children are deleted by driver core recursion rather than __scmi_device_destroy(). Release the SCMI bus ID from a common helper used by destroy, register-failure and final-release paths, and clear scmi_dev->id after freeing it so the final release cannot free the same ID again. | ||||
| CVE-2026-93084 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Drop handle on protocol bind failures The SCMI bus notifier acquires an SCMI handle when the driver core emits BUS_NOTIFY_BIND_DRIVER, before invoking the protocol driver probe callback. The protocol probe path only checks whether sdev->handle is set. If device_link_add() fails after the handle has been acquired, the protocol device can still bind with a valid handle but without the dependency link to the SCMI parent. A concurrent parent unbind can then miss the child and tear down the SCMI instance while the child still holds a handle into it. If the protocol driver probe later fails, for example with -EPROBE_DEFER, the driver core emits BUS_NOTIFY_DRIVER_NOT_BOUND rather than BUS_NOTIFY_UNBOUND_DRIVER. The SCMI notifier only released the handle on BUS_NOTIFY_UNBOUND_DRIVER, so each failed protocol-device bind leaked the SCMI instance users refcount and left sdev->handle set after the failed probe. Make the link helper report failure and drop the acquired handle if the link cannot be created. Also handle BUS_NOTIFY_DRIVER_NOT_BOUND in the same cleanup path used for unbind so failed probes balance the earlier BUS_NOTIFY_BIND_DRIVER acquisition. | ||||