Export limit exceeded: 412653 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 412653 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (412653 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98044 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject legacy packet loads from callbacks check_ld_abs() models a failed BPF_LD_ABS or BPF_LD_IND in a subprogram as an implicit return with R0 set to zero. It calls prepare_func_exit() to explore this synthesized path. When the load is reached directly from a synchronous callback, prepare_func_exit() enforces the callback return contract and marks R0 precise. R0 is not derived from a real instruction on this path, so precision backtracking reaches the callback call with R0 still requested and triggers the "callback unexpected regs" verifier bug. A privileged program loader can therefore cause a verifier warning and an -EFAULT BPF_PROG_LOAD. These legacy packet-load instructions are deprecated. Reject them from callbacks rather than complicating their implicit-return model. Check all active frames before constructing the implicit return so nested static subprograms cannot hide the callback context. Global functions are verified independently with a fresh frame zero, so an active-frame check cannot identify a global function called from a callback. Also check the complete subprogram call graph during stack-depth validation and reject a function containing a legacy load when any caller is a callback. This covers global and static descendants without making has_ld_abs transitive, preserving its per-function BTF return-type check. Ordinary uses outside callbacks remain supported. | ||||
| CVE-2026-98043 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Don't infer non-NULL from a pointer with an unbounded offset reg_not_null() decides that a register holds a non-NULL value by looking at its type alone. For pointer types that allow arithmetic the type only guarantees a non-NULL base, in case of an unbound offset the runtime offset value might still add up to NULL. Consider the followng program: r6 = bpf_map_lookup_elem(map, &0); /* present */ if (r6 == 0) return 0; r7 = bpf_map_lookup_elem(map, &1); /* absent, NULL at runtime */ r8 = r7; r8 -= r6; /* pointer - pointer: unknown scalar, -r6 */ r8 <<= 1; r8 >>= 1; /* any non-negative offset is accepted by */ /* check_reg_sane_offset_ptr() */ r6 += r8; /* verifier: map value; runtime: zero */ if (r7 != r6) return 0; *(u8 *)(r7 + 0); /* r7 is inferred non-NULL, both are zero */ At runtime both registers are zero, the comparison is true and the load faults with NULL pointer dereference. Require the offset to be within +-BPF_MAX_VAR_OFF in reg_not_null(). | ||||
| CVE-2026-98041 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Don't predict JMP32 pointer vs zero comparisons Consider the following program: r1 = map_value; /* low 32 bits are zero at runtime */ r6 = 0xdead000000000000; if w1 != 0 goto l1; l0: r1 += r6; r2 = *(u64 *)(r1 + 0); exit; l1: r6 = 0; goto l0; At the moment is_branch_taken() reports the jump as always taken, because it does not distinguish between BPF_JMP and BPF_JMP32 comparisons when processing 'if w1 != 0 ...'. | ||||
| CVE-2026-98038 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Keep refcount_acquire nullable for borrowed RCU kptrs bpf_refcount_acquire() is fallible for a borrowed reference because the object may have reached a zero refcount. The verifier therefore keeps KF_RET_NULL on the return value unless the argument is an owning reference. An RCU-protected load of a local kptr is marked MEM_ALLOC, but it only receives NON_OWN_REF when the pointee contains a graph node. A refcounted object without a graph node consequently looks like an owning reference even though the loaded register has no acquired reference state. If the program drops the last real reference while remaining in the RCU critical section, refcount_inc_not_zero() returns NULL while the verifier treats the result as non-NULL. Only classify the argument as owning when it is backed by a verifier-tracked reference. This retains the non-NULL return for pointers from bpf_obj_new(), bpf_kptr_xchg(), or an earlier successful acquisition, while requiring a NULL check for borrowed RCU kptrs. [ kkd: Rewrote commit log ] | ||||
| CVE-2026-98034 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Mark NULL kptr stores precise check_map_kptr_access() permits a scalar store into an untrusted kptr field only when the register is known to contain zero. Unlike other verifier checks whose outcome depends on a scalar value, it does not mark that register precise. A state checkpoint reached with an imprecise zero can therefore prune a second path that reaches the store with an arbitrary nonzero scalar. The program can write attacker-controlled bits into the kptr field and load them back as a PTR_TO_BTF_ID. Call mark_chain_precision() before accepting a known-zero register. This forces state equivalence to compare its scalar range and makes the verifier visit and reject a path carrying a nonzero value. | ||||
| CVE-2026-98033 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve inner map identity in callback frames Callback frame constructors initialize map-typed argument registers with __mark_reg_known_zero() and then restore map_ptr. This clears map_uid, which is the only field distinguishing inner maps that share an inner_map_meta template. When a timer callback invokes bpf_for_each_map_elem() on a second inner map, both the saved first map and the second map value can reach the nested callback as the same template with map_uid zero. bpf_timer_init() then accepts pairing the timer from the second map with the first map. The runtime records the first map in the timer without taking a reference. Freeing that map does not find the timer stored in the second map, so a later timer callback dereferences the freed map. Copy map_uid from the same caller register as map_ptr when constructing for-each, timer/workqueue, and task-work callback arguments. The existing identity check can then reject mismatched inner maps while allowing a callback value to be paired with its actual map. | ||||
| CVE-2026-98032 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix subbuf resize races with trace_pipe_raw readers Concurrent subbuffer resizes may crash trace_pipe_raw readers or leak uninitialized memory to userspace due to stale size values. Modify ring_buffer_alloc_read_page() to handle the resizing of an existing buffer_data_read_page if necessary and add a new ring_buffer_read_page_size(). This new function enables ring-buffer buffer_data_read_page users to not call the racy ring_buffer_subbuf_size_get(). This makes the spare_size member of ftrace_buffer_info redundant. Finally, handle buffer_data_read_page/reader_page order discrepancy in ring_buffer_read_page(). On a mismatch simply copy manually the data to the buffer_data_read_page. | ||||
| CVE-2026-98021 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: reject oversized tx_queue_len at netlink parse time rtnl_create_link() assigns IFLA_TXQLEN directly to dev->tx_queue_len without going through netif_change_tx_queue_len(), so a device created with "ip link add ... txqueuelen 500000" bypasses the S16_MAX cap and still triggers the oversized ring allocations in pfifo_fast, tun and tap. The veth peer nest (rtnl_nla_parse_ifinfomsg()) and the RTM_NEWLINK-on-existing-device path reach the same sinks. Enforce the cap in ifla_policy instead: IFLA_TXQLEN becomes NLA_POLICY_FULL_RANGE(NLA_U32, &txqlen_range) with txqlen_range = { .min = 0, .max = S16_MAX }. All netlink consumers parse against this policy - rtnl_setlink(), rtnl_newlink() (create and change), and the veth peer nest - so every netlink path is capped at parse time and rejects the attribute with -ERANGE plus a proper "integer out of range" extack message before any device state is modified (the RTM_SETLINK half-application wart is gone with it). Document the bound in the rt-link.yaml netlink spec. Conditions to recreate the bug: - CONFIG_NET_SCHED=y, CONFIG_VETH=y, CONFIG_USER_NS=y, CONFIG_NET_NS=y. - Unprivileged user in a fresh user+net namespace (unshare -Urn): ip link add v0 txqueuelen 500000 type veth peer name v1 -> on the fixed kernel this is rejected with -ERANGE ("integer out of range" extack) instead of installing an oversized tx_queue_len that later inflates pfifo_fast/tun/tap ring allocations. - ip link set v0 txqueuelen 500000 is likewise rejected at parse time. | ||||
| CVE-2026-98019 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: mark a NULL call argument precise check_func_arg() allows bpf_register_is_null() for nullable arguments w/o marking the underlying scalar register precise. Hence a checkpoint created on such a path would prune against arbitrary scalar value. check_helper_call() enforces second parameter of the bpf_get_local_storage() to be zero, w/o marking the underlying scalar register precise. Hence a checkpoint created on such a path would prune against arbitrary scalar value. Grouping these two into one patch, as they share the same fixes tag. | ||||
| CVE-2026-98003 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Do not reallocate GA log buffers on resume Commit c5e1a1eb9279 ("iommu/amd: Simplify and Consolidate Virtual APIC (AVIC) Enablement") moved the GA log allocation from iommu_init_pci() to enable_iommus_vapic(), which is called on every resume. iommu_init_ga_log() assigns iommu->ga_log and iommu->ga_log_tail unconditionally. Each resume therefore replaces the boot-time pointers and leaks both old allocations. The function also uses GFP_KERNEL from a syscore resume callback, where interrupts are disabled and the non-boot CPUs are offline. Return early if both buffers are already allocated. Clear the pointers in free_ga_log() so a partial allocation failure cannot leave ga_log dangling. | ||||
| CVE-2026-97997 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: virtio_ring: fix stale descriptor flags after a failed packed add In a packed ring the AVAIL and USED bits sit in the descriptor itself, so writing them makes that descriptor available. Those bit combinations flip meaning on every round of the ring, tracked by a wrap counter, so invalidating or validating a descriptor means inverting both bits. Commit 1ce9e6055fa0 ("virtio_ring: introduce packed ring support") has virtqueue_add_packed() make every descriptor of a chain available as it maps the chain, and write the head last. The device consumes the ring in order and stops at a head that is not available yet, so it never reaches the rest. When vring_map_one_sg() fails partway, unmap_release unmaps the segments and restores avail_used_flags, but the descriptors it wrote to in the ring stay marked with AVAIL and USED bits. The head is now the only entry that keeps the device from consuming these stale entries. For example, the ring would look like this now. Z - pre-previous command A - previous command B - aborted command C - current command [A1 DONE] [A2 DONE] <C1 EMPTY> [B2] [B3] [Z1 DONE] When the driver now attempts to issue the C command, the next add starts at the same head as B. If C spans less descriptors than B, there is no end marker because AVAIL and USED bits were still in place. And that means the device will start interpreting these stale entries (B2/B3) as another command entry, which then blocks the queue. This effect typically happens in swiotlb configurations under memory pressure, because vring_map_one_sg() can then fail with larger I/O requests which then leads to command abortions. There are broadly 2 ways to avoid leaving those flags behind: 1) Defer those flags too until the chain is complete. 2) Rewrite those flags for the previous wrap counter. Implement the second option in both packed add paths. The first option traverses the chain a second time on every successful add. The second option invalidates all added descriptors when any add fails. With this patch applied, a packed virtqueue keeps completing requests after a failed add. | ||||
| CVE-2026-97992 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vhost-vdpa: protect config_ctx from being freed under the config callback vhost_vdpa_config_cb() loads v->config_ctx and signals it without taking a reference and without holding any lock: struct eventfd_ctx *config_ctx = v->config_ctx; if (config_ctx) eventfd_signal(config_ctx); VHOST_VDPA_SET_CONFIG_CALL replaces that field and drops what is normally the last reference to the old context: swap(ctx, v->config_ctx); if (ctx) eventfd_ctx_put(ctx); eventfd_ctx_put() drops the last kref and frees the context immediately, with no RCU grace period, so a callback that has already loaded the pointer goes on to dereference freed memory. The two sides share no lock: the ioctl runs under vhost_dev.mutex, while the parent invokes the callback from its own interrupt or workqueue context. This is not the reopen refcount underflow fixed by commit f6bbf0010ba0 ("vhost-vdpa: fix use-after-free of v->config_ctx"), which was about vhost_vdpa_config_put() leaving a stale pointer behind. Here the pointer is maintained correctly and it is the read side that is unprotected. With VDUSE as the parent this is reachable from userspace with access to /dev/vduse (root by default). VDUSE_DEV_INJECT_CONFIG_IRQ queues dev->inject, and vduse_dev_irq_inject() runs the callback under VDUSE's own dev->irq_lock, which vhost does not hold. vduse_dev_reset() does flush_work(&dev->inject), but VHOST_VDPA_SET_CONFIG_CALL never goes through reset, so an inject already in flight is not waited for. A process that injects config interrupts on the VDUSE fd while another thread swaps the call fd on the vhost-vdpa fd hits it in seconds: BUG: KASAN: slab-use-after-free in native_queued_spin_lock_slowpath Read of size 4 at addr ffff888107d21808 by task kworker/u17:1/2993 Workqueue: vduse-irq vduse_dev_irq_inject Call Trace: native_queued_spin_lock_slowpath+0x97/0x5b0 _raw_spin_lock_irqsave+0xd4/0xe0 eventfd_signal_mask+0x69/0x120 vhost_vdpa_config_cb+0x34/0x50 vduse_dev_irq_inject+0x46/0x60 process_one_work+0x468/0x950 Allocated by task 2992: do_eventfd+0x50/0x200 __x64_sys_eventfd2+0x2e/0x40 Freed by task 2992: eventfd_ctx_put+0xb9/0xc0 vhost_vdpa_unlocked_ioctl+0x116c/0x2190 Add a spinlock covering every access to config_ctx, so the callback either signals a context that is still alive or observes NULL, and the put happens only once no callback can reach the old value. Clearing the parent's callback before the put would not be enough: of the in-tree set_config_cb() implementations only VDUSE takes a lock, the rest store the pointer unlocked, so that would not order against an in-flight invocation. | ||||
| CVE-2026-97989 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vduse: validate virtqueue alignment vduse_validate_config() only checks the upper bound of vq_align. Invalid values can therefore reach vring_create_virtqueue_map(). The split-ring helpers use align - 1 as a bit mask, so the alignment must be a non-zero power of two. A zero value makes vring_size() drop the descriptor and available-ring part and vring_init() leave the used ring pointer NULL. The VIRTIO spec requires the used ring to start at an address aligned to at least 4 bytes. Reject values below VRING_USED_ALIGN_SIZE as well as non-power-of-two values before they reach the virtio ring helpers. Opening a virtio-net device created with vq_align=0 triggered: BUG: KASAN: null-ptr-deref in virtqueue_kick_prepare_split+0xe3/0x100 Read of size 2 at addr 0000000000000000 by task systemd-network/1062 Call Trace (relevant frames): dump_stack_lvl print_report kasan_report __asan_load2 virtqueue_kick_prepare_split+0xe3/0x100 virtqueue_kick_prepare+0x40/0x60 try_fill_recv+0x857/0x1250 virtnet_open+0x189/0x460 __dev_open+0x225/0x390 __dev_change_flags+0x368/0x3b0 netif_change_flags+0x56/0xc0 do_setlink.isra.0+0x68c/0x1e30 Validate the value before it reaches the virtio ring helpers. | ||||
| CVE-2026-97988 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: vhost: invalidate vring access on IOTLB transitions When VIRTIO_F_ACCESS_PLATFORM changes, cached vring pointers and IOTLB metadata are interpreted in a different address space. Keeping them across the transition can leave stale ring mappings in use. Clearing d->iotlb before taking the VQ locks also lets a worker observe a transient NULL d->iotlb and fall back to d->umem while translating a descriptor. Add a common vhost_clear_device_iotlb() helper for vhost-net and vhost-vsock. Take all VQ mutexes in index order before dropping the device-wide IOTLB, invalidate each VQ's cached ring access and metadata, clear pending IOTLB messages, and free the old table after the handoff. This serializes the transition with workers and prevents mixed address space mappings. On the first direct-to-IOTLB transition, invalidate the cached vring addresses. When an existing device IOTLB is replaced, preserve the GIOVA ring addresses and reset only the metadata cache. After clearing ACCESS_PLATFORM, userspace must configure the vring addresses for the new address mode. vhost_vq_invalidate_access() clears desc, avail, and used together. Treat the VQ as invalidated only when all three are NULL, since a single GIOVA address may legitimately be zero. | ||||
| CVE-2026-97985 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Update last skb marker in manage_oob(). Fahad Alharbi reported that blocking recv(MSG_PEEK) could hog CPU due to OOB skb. In the following cases, manage_oob() skips OOB skb(s) and returns NULL for the last recv(MSG_PEEK): socketpair(AF_UNIX, SOCK_STREAM, 0, sk); 1) skb -> OOB skb -> NULL send(sk[0], "ab", 2, MSG_OOB); recv(sk[1], buf, 0, MSG_PEEK); 2) skb -> consumed OOB skb -> NULL send(sk[0], "ab", 2, MSG_OOB); recv(sk[1], buf, 1, MSG_OOB); recv(sk[1], buf, 0, MSG_PEEK); 3) consumed OOB skb -> OOB skb -> NULL send(sk[0], "a", 1, MSG_OOB); recv(sk[1], buf, 0, MSG_OOB); send(sk[0], "b", 1, MSG_OOB); recv(sk[1], buf, 1, MSG_PEEK); Then, @copied is 0 in unix_stream_read_generic() (zero-length buffer, or non-OOB skb is not yet consumed), and unix_stream_data_wait() is called. However, it returns immediately because @last is not updated in unix_stream_read_generic(), and the thread busy-waits for a new skb. Let's update @last in manage_oob(). For MSG_PEEK, @last is updated with the skipped OOB, and for the non-peek case, @last matches the returned value (when !copied) because OOB is unlinked. Note that manage_oob() is inlined and no stack canary is added. | ||||
| CVE-2026-97978 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: eth: ice: don't dereference pointers from TP_printk() After forwarding net-next during the v7.3 merge window we started seeing: TRACE EVENT ERROR: Event ice_tx_dim_work has double dereference in TP_printk: REC->q_vector->tx.tx_ring->q_index WARNING: kernel/trace/trace_events.c:420 at test_double_dereference.cold+0x39/0x4b this is due to extra checks added in tracing subsystem in commit b5cc230af5e5 ("tracing: Warn when an event dereferences a pointer in TP_printk()"). Printing happens long after the event was recorded, by which point the pointers may be invalid (the ring or the dim instance). Copy the eight scalars into the event instead. | ||||
| CVE-2026-97975 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sysfs: Fix NULL pointer dereference in device_del() A NULL pointer dereference in klist_put() occurs when a child device (such as a BNEP network device in bnep_session) is concurrently being unregistered while hci_conn_del_sysfs() reparents child devices. This is caused by a race condition between hci_conn_del_sysfs() and concurrent child device unregistration (e.g. bnep_session calling unregister_netdev()). During device unregistration, device_del() snapshots a non-NULL parent pointer. Concurrently, hci_conn_del_sysfs() finds the child device using device_find_any_child() and calls device_move() to reparent it to NULL, which removes the node from its parent's klist and clears knode_parent. Subsequently, device_del() calls klist_del(&dev->p->knode_parent) using the stale parent snapshot, causing klist_put() to dereference knode_klist(n)->put on an already removed node, resulting in a NULL pointer dereference. This race was introduced by commit 27aabf27fd01 ("Bluetooth: fix use-after-free in device_for_each_child()"), which replaced device_find_child(..., __match_tty) with device_find_any_child() in hci_conn_del_sysfs(). That change was intended to avoid a use-after-free where conn->dev outlived its parent hdev->dev when child devices held references to conn->dev, because conn->dev only held a reference to hdev->dev while registered in sysfs. Fix the issue properly by taking an explicit reference to the parent device with get_device(&hdev->dev) in hci_conn_init_sysfs() and dropping it with put_device(parent) in bt_link_release() when the conn device is freed. This ensures that hdev->dev remains valid for the entire lifecycle of conn->dev, resolving the underlying use-after-free. With the parent reference held properly, restore the __match_tty filter in hci_conn_del_sysfs() so that device_move() is only invoked on persistent RFCOMM TTY devices as originally intended, eliminating the race condition with unregistering network devices. | ||||
| CVE-2026-97965 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: initialize _md in vxlan_xmit_one() If a VXLAN device is configured with both VXLAN_F_COLLECT_METADATA and VXLAN_F_GBP, and a packet is transmitted through it using an external ip_tunnel_info that lacks the IP_TUNNEL_VXLAN_OPT_BIT flag, md is left pointing to the uninitialized _md stack variable: if (test_bit(IP_TUNNEL_VXLAN_OPT_BIT, info->key.tun_flags)) { if (info->options_len < sizeof(*md)) goto drop; md = ip_tunnel_info_opts(info); } Because IP_TUNNEL_VXLAN_OPT_BIT is not set, md is not updated and remains pointing to _md. Later, vxlan_build_skb() is called with md, which eventually calls vxlan_build_gbp_hdr(): if (vxflags & VXLAN_F_GBP) vxlan_build_gbp_hdr(vxh, md); Inside vxlan_build_gbp_hdr(), md->gbp is read: if (!md->gbp) return; gbp = (struct vxlanhdr_gbp *)vxh; ... if (md->gbp & VXLAN_GBP_DONT_LEARN) gbp->dont_learn = 1; If the stack contains garbage, this causes: 1) VXLAN_HF_GBP flag to be spuriously set in the VXLAN header. 2) gbp->dont_learn and gbp->policy_applied to be set from stack bits. 3) gbp->policy_id to receive 16 bits of uninitialized kernel stack data, leaking it onto the wire. Fix this by zero-initializing _md. If IP_TUNNEL_VXLAN_OPT_BIT is not present, md->gbp remains 0, and vxlan_build_gbp_hdr() returns early without modifying the VXLAN header. | ||||
| CVE-2026-97962 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Move representor vnic reporter to eswitch devlink port The representor vnic devlink health reporter is created and destroyed along the representor netdev (un)load path, which is not serialized by the devlink instance lock. Destroying the reporter from there triggers a devl_assert_locked() splat on driver unbind: WARNING: net/devlink/core.c:259 at devl_assert_locked+0x54/0x70, CPU#2: bash/3758 Modules linked in: mlx5_vdpa vringh vdpa mlx5_ib mlx5_fwctl mlx5_core ... CPU: 2 UID: 0 PID: 3758 Comm: bash Tainted: G W 6.19.0+ #1 PREEMPT Tainted: [W]=WARN Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), ... RIP: 0010:devl_assert_locked+0x54/0x70 Call Trace: <TASK> devl_health_reporter_destroy+0x3a/0x1b0 mlx5e_vport_rep_unload+0x12d/0x2b0 [mlx5_core] mlx5_eswitch_unregister_vport_reps+0x1b8/0x220 [mlx5_core] ? __esw_offloads_unload_rep+0x190/0x190 [mlx5_core] ? kernfs_remove_by_name_ns+0xc3/0xf0 device_release_driver_internal+0x3b2/0x560 unbind_store+0xce/0xf0 Move the reporter's lifecycle to the eswitch devlink port (un)register paths, which are already serialized by the devlink instance lock, and store the handle on mlx5_devlink_port. Use the port's mlx5_vport as the reporter priv since the diagnose callback only needs a device handle and a vport number, and mlx5_vport carries both and is initialized before any representor driver probes. | ||||
| CVE-2026-97961 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/core: Allow list_del during perf_event_overflow() A PMU might use perf_sched_cb_inc() and perf_sched_cb_dec() interface to get the PMU call back function pmu::sched_task invoked at schedule in and schedule out. This is achieved by walking along the list anchored by sched_cb_list. The following scenario might lead to a list corruption. perf_pmu_sched_task() for_each_list_entry(..., &sched_cb_list) +--> __perf_pmu_sched_task() +--> event->pmu->sched_task()) +--> PMU_push_sample() +--> perf_event_overflow() +--> __perf_event_overflow() +--> pmu->stop() +--> perf_sched_cb_dec() remove entry from sched_cb_list while list node in use. This happens when ioctl(fd, PERF_EVENT_IOC_REFRESH, xxx) has been invoked and perf_event::event_limit hits zero. Prevent the list corruption and convert for_each_list_entry() to for_each_list_entry_safe(). | ||||