Export limit exceeded: 10524 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (10524 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-92506 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix requested device removal race scmi_protocol_device_unrequest() drops scmi_requested_devices_mtx while notifying listeners but continues to retain the per-protocol list head. When two SCMI drivers for the same protocol unregister concurrently, one thread can remove the final request and free the list head while the other is running its notifier. The latter then dereferences the freed list head after reacquiring the mutex and can free it a second time. Complete the list and IDR updates, including freeing an empty list head, before dropping the mutex. Keep the blocking notifier outside the critical section and retain only the detached request across the callback. | ||||
| CVE-2026-92512 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix use after free in ib_query_qp() When querying a QP via the netlink flow the only synchronization mechanism for the said QP is rdma_restrack_get(), meanwhile during the QP destroy path rdma_restrack_del() is called at the end of the ib_destroy_qp_user() function which is too late, since by then the vendor specific resources for said QP would already be destroyed, and till the rdma_restrack_del() is called this QP can still be accessed, which could cause the use after free below. Fix this by moving the rdma_restrack_begin_del() to the start of the ib_destroy_qp_user(), which in turn waits for all usages of the QP to be done then removes it from the database to prevent access to it while it is being destroyed. RIP: 0010:ib_query_qp+0x15/0x50 [ib_core] Code: 48 83 05 5d 8e b9 ff 01 eb b5 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 c7 46 40 00 00 00 00 48 c7 46 78 00 00 00 00 <48> 8b 07 48 8b 80 88 01 00 00 48 85 c0 74 1a 48 83 05 54 91 b9 ff RSP: 0018:ff11000108a8f2f0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ff11000108a8f370 RCX: ff11000108a8f370 RDX: 0000000000000000 RSI: ff11000108a8f3d8 RDI: 0000000000000000 RBP: ff1100010de5a000 R08: 0000000000000e80 R09: 0000000000000004 R10: ff110001057a604c R11: 0000000000000000 R12: ff11000108a8f370 R13: ff110001090e8000 R14: 0000000000000000 R15: ff110001057a602c FS: 00007f2ffd8db6c0(0000) GS:ff110008dc90b000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000010b9a7004 CR4: 0000000000373eb0 Call Trace: <TASK> mlx5_ib_gsi_query_qp+0x21/0x50 [mlx5_ib] mlx5_ib_query_qp+0x689/0x9d0 [mlx5_ib] ib_query_qp+0x35/0x50 [ib_core] fill_res_qp_entry_query.isra.0+0x47/0x280 [ib_core] ? __wake_up+0x40/0x50 ? netlink_broadcast_filtered+0x15a/0x550 ? kobject_uevent_env+0x562/0x710 ? ep_poll_callback+0x242/0x270 ? __nla_put+0xc/0x20 ? nla_put+0x28/0x40 ? nla_put_string+0x2e/0x40 [ib_core] fill_res_qp_entry+0x138/0x190 [ib_core] res_get_common_dumpit+0x4a5/0x800 [ib_core] ? fill_res_qp_entry_query.isra.0+0x280/0x280 [ib_core] nldev_res_get_qp_dumpit+0x1e/0x30 [ib_core] netlink_dump+0x16f/0x450 __netlink_dump_start+0x1ce/0x2e0 rdma_nl_rcv_msg+0x1d3/0x330 [ib_core] ? nldev_res_get_qp_raw_dumpit+0x30/0x30 [ib_core] rdma_nl_rcv_skb.constprop.0.isra.0+0x108/0x180 [ib_core] rdma_nl_rcv+0x12/0x20 [ib_core] netlink_unicast+0x255/0x380 ? __alloc_skb+0xfa/0x1e0 netlink_sendmsg+0x1f3/0x420 __sock_sendmsg+0x38/0x60 ____sys_sendmsg+0x1e8/0x230 ? copy_msghdr_from_user+0xea/0x170 ___sys_sendmsg+0x7c/0xb0 ? __futex_wait+0x95/0xf0 ? __futex_wake_mark+0x40/0x40 ? futex_wait+0x67/0x100 ? futex_wake+0xac/0x1b0 __sys_sendmsg+0x5f/0xb0 do_syscall_64+0x55/0xb90 entry_SYSCALL_64_after_hwframe+0x4b/0x53 | ||||
| CVE-2026-92513 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mana_ib: drain QP references after partial table insertion mana_table_store_ud_qp() publishes a QP at its send-queue id before inserting the receive-queue id, dropping the XArray lock between the two xa_insert_irq() calls. A concurrent completion handler can look up the QP and take a transient reference. When the second insertion fails, the rollback erased only the send-queue entry and returned, leaving both the initial table reference and the transient reference outstanding while RDMA core frees the QP, causing a use-after-free. Drain the reference as normal destruction does: drop the initial reference and wait for qp->free, releasing the QP only after every concurrent lookup returns its reference. | ||||
| CVE-2026-90426 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Free the error IRQ before tearing down VINTFs tegra241_cmdqv_remove() tears each VINTF down first, then calls free_irq(). Tearing a VINTF down frees vintf0 and clears cmdqv->vintfs[0]. An error in that window makes tegra241_cmdqv_isr() read the stale slot and hand it to tegra241_vintf0_handle_error(), which dereferences a NULL or freed pointer. Free the IRQ before tearing the VINTFs down. free_irq() waits for in-flight handlers to finish and blocks new ones, so no ISR can observe a VINTF as it is torn down. Note: a user-owned VINTF (viommu) could outlive this teardown, which unmaps cmdqv->base and frees cmdqv->vintfs, so a later viommu close then touches freed memory. This is neither introduced nor fixed here: a physical IOMMU is not a pluggable device, so iommufd by design holds no reference on the one behind a viommu, and this teardown is not expected while that viommu is still alive. | ||||
| CVE-2026-92481 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: mediatek: free EINT resources on unbind mtk_eint_do_init() creates an IRQ domain, populates it with a mapping for every EINT line and installs a chained handler on the parent interrupt, but none of these are ever released. This was harmless while the drivers were built-in, but now that they can be built as modules and unbound/rmmod'd it leaves behind a dangling IRQ domain, interrupt mappings whose chip data points at freed memory, and a chained handler that keeps firing into that freed data. The plain allocations in mtk_eint_do_init() already use the device-managed devm_*() helpers, so tear the remaining resources down the same way: register a devm action that detaches the chained handler, waits for any in-flight handler to finish, disposes of the per-line mappings and removes the IRQ domain. This mirrors the device-managed lifecycle adopted for the GPIO chip and keeps the whole EINT setup self-cleaning on unbind. | ||||
| CVE-2026-90353 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: fix ext PHY use-after-free on register error path After mt7915_register_ext_phy() succeeded, a failure of the main PHY mt7915_init_debugfs() or mt7915_coredump_register() unwound through free_phy2, which called ieee80211_free_hw() on the ext PHY hw while it was still registered with mac80211, since mt76_unregister_device() only unregisters the main hw. Unregister the ext PHY (thermal + phy + hw) first and skip the redundant free. | ||||
| CVE-2026-90365 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: cancel reset and rc work on device unregister Both drivers cancelled dump_work on unregister but left reset_work and rc_work to be flushed only by destroy_workqueue() in mt76_free_device(), which runs after the hw is unregistered and the hardware stopped. A reset_work that fires in that window calls ieee80211_restart_hw() and re-arms mac_work on an unregistered hw, and rc_work touches station state being torn down. Cancel both up front, alongside dump_work. | ||||
| CVE-2026-90395 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: isp1704_charger: cancel work on remove The USB notifier and initial VBUS detection can schedule isp->work. The remove path unregisters the notifier and power supply, but does not wait for queued or running work before tearing down the power supply state. Cancel the work after unregistering the notifier. Do this before unregistering the power supply. This issue was found by a static analysis tool. | ||||
| CVE-2026-90334 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tty: clear cdev pointer after cdev_add() failure tty_cdev_add() drops the cdev reference when cdev_add() fails, but leaves driver->cdevs[index] pointing to freed memory. tty_unregister_device() later passes that stale pointer to cdev_del(), causing a use-after-free. Clear the slot after dropping the reference. | ||||
| CVE-2026-90336 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: serial: core: clear freed pointers on uart_register_driver() failure uart_register_driver() leaves drv->state pointing to freed memory when tty_alloc_driver() fails. If tty_register_driver() fails, drv->tty_driver also retains a pointer after its reference is dropped. Drivers that use drv->state as an "already registered" flag can then skip registration on the next probe and pass the freed state to uart_add_one_port(). This issue was found with failslab on QEMU's raspi1ap board by failing registration and binding the PL011 port again. Clear both pointers on their failure paths, as uart_unregister_driver() already does. | ||||
| CVE-2026-90337 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: serial: core: do fallible allocations before the console can be registered serial_core_add_one_port() allocates uport->tty_groups after uart_configure_port(), which may register the console. If the allocation fails, the driver unwinds the port while its console remains registered. The earlier uport->name allocation has a related failure path that leaves state->uart_port linked to a port being freed. Failslab reproduced a NULL dereference in PL011 console output and a KASAN use-after-free in i.MX console output after failed binds. Allocate the name and tty_groups before linking the port and configuring it. Reserve space for the optional driver attribute group because config_port() may populate uport->attr_group during configuration. | ||||
| CVE-2026-90277 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: md/md-llbitmap: prevent create failure bitmap UAF llbitmap_create() publishes mddev->bitmap before reading the bitmap superblock. This is needed because llbitmap_read_sb() can initialize a new bitmap and flush it through helpers that use mddev->bitmap. If llbitmap_read_sb() fails, the old cleanup dropped bitmap_info.mutex and freed llbitmap before clearing mddev->bitmap. Readers such as /proc/mdstat rely on bitmap_info.mutex to keep the bitmap pointer stable while collecting bitmap stats, so they could observe the stale pointer after the failed create path released the mutex. Clear mddev->bitmap while still holding bitmap_info.mutex, then free the failed llbitmap after dropping the mutex. This makes mutex-protected readers see either a live bitmap or no bitmap. | ||||
| CVE-2026-90278 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: md: wait for behind writes before destroying bitmap __md_stop() destroyed the bitmap before calling mddev_detach(). That made mddev_detach() skip bitmap_ops->wait_behind_writes(), because the bitmap was already disconnected from mddev. This was still safe for the legacy bitmap because bitmap_destroy() waits for behind writes itself. llbitmap keeps that wait in its ->wait_behind_writes() operation instead, while ->destroy() tears down the llbitmap storage. With the old ordering, RAID1 behind-write completions could still run after llbitmap storage had been freed. Call mddev_detach() before md_bitmap_destroy() so the common detach path can wait for behind writes while the bitmap is still alive. Only destroy the bitmap after those users are gone. | ||||
| CVE-2026-90356 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: free vif links after clearing wcid entries on full reset mt7996_mac_reset_vif_iter() queues non-default vif links for kfree_rcu while dev->wcid[] still holds pointers to the wcid embedded in each freed link; mt76_reset_device() then dereferences those entries and runs mt76_wcid_cleanup() on them. If a grace period elapses in between, the cleanup operates on freed memory. Run mt76_reset_device() first, so the wcid entries are cleaned up and cleared while the links are still valid. | ||||
| CVE-2026-90357 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: unlink TWT flow if the MCU rejects the agreement The flow is added to dev->twt_list before sending the agreement to the firmware, but the error path leaves it linked while flowid_mask is never set. The flow slot can then be reused and memset while still on the list, corrupting twt_list, and station removal leaves a dangling entry behind that mt7915_mac_twt_sched_list_add() later walks. | ||||
| CVE-2026-90288 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: phy: renesas: rcar-gen2: Fix double of_node_put on phy creation failure for_each_child_of_node_scoped() releases the node reference on scope exit, so the explicit of_node_put(np) in the devm_phy_create() error path drops it twice. Drop the redundant of_node_put() and let the scoped cleanup handle it. | ||||
| CVE-2026-90198 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: core: Fix use-after-free in snd_card_do_free() A use-after-free was detected in snd_card_do_free() when a sound card managed by devres is unbound while a user-space application still holds an open file descriptor. For managed cards, the memory is allocated using devres_alloc(), and its release function is set to __snd_card_release(), which calls snd_card_free(). When the device is unbound, the unbind thread calls snd_card_free(), which drops a reference to the card's device. If the user thread still has an open file descriptor, the reference count does not reach zero, and the unbind thread blocks on wait_for_completion(&released). When the user thread closes the file descriptor, it drops the final reference, invoking the device release callback release_card_device(), which calls snd_card_do_free(). snd_card_do_free() performs cleanup and calls complete(card->release_completion). This wakes up the unbind thread, which returns from snd_card_free() and __snd_card_release(). The devres core then immediately frees the memory block containing the snd_card structure. Meanwhile, the user thread continues execution in snd_card_do_free() and evaluates `if (!card->managed)`. It reads the `managed` boolean from the snd_card structure that was just freed by the unbind thread, triggering a KASAN use-after-free. Fix this by caching the value of card->managed in a local variable before calling complete(). This ensures that the card pointer is not dereferenced after the unbind thread has been woken up and potentially freed the card. BUG: KASAN: use-after-free in snd_card_do_free sound/core/init.c:604 [inline] BUG: KASAN: use-after-free in release_card_device+0x1ab/0x1b0 sound/core/init.c:153 Read of size 1 at addr ffff8881912ec909 by task syz-executor130/5857 Call Trace: <TASK> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 print_address_description+0x55/0x1e0 mm/kasan/report.c:378 print_report+0x58/0x70 mm/kasan/report.c:482 kasan_report+0x117/0x150 mm/kasan/report.c:595 snd_card_do_free sound/core/init.c:604 [inline] release_card_device+0x1ab/0x1b0 sound/core/init.c:153 device_release+0xc4/0x1f0 drivers/base/core.c:-1 kobject_cleanup lib/kobject.c:689 [inline] kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x222/0x550 lib/kobject.c:737 snd_card_file_remove+0x331/0x390 sound/core/init.c:1125 snd_pcm_release+0x12c/0x160 sound/core/pcm_native.c:2986 __fput+0x418/0xa50 fs/file_table.c:512 fput_close_sync+0x11f/0x240 fs/file_table.c:617 __do_sys_close fs/open.c:1511 [inline] __se_sys_close fs/open.c:1496 [inline] __x64_sys_close+0x7e/0x110 fs/open.c:1496 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x174/0x580 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> | ||||
| CVE-2026-90171 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: smbdirect: release pending child sockets outside the handler lock smbdirect_socket_destroy() releases the listener's pending/ready child sockets while still holding the listener's handler lock, the &id_priv->handler_mutex taken via rdma_lock_handler(), not sc->listen.lock, and before the listener's own rdma_destroy_id(). That ordering has one real consequence and one cosmetic one. The real one: smbdirect_socket_release() drops the child's last reference, which destroys the child's cm_id. Doing that before the listener's rdma_destroy_id() lets _cma_cancel_listens(), running from the listener's _destroy_id(), walk an already freed child id_priv, which KASAN catches as a slab-use-after-free during listener shutdown: [ 4758.909130] BUG: KASAN: slab-use-after-free in __mutex_lock+0x1469/0x1560 [ 4758.911450] Read of size 1 at addr ffff88821c381db4 by task ksmbd.control/1652 [ 4758.913262] Call Trace: [ 4758.913267] <TASK> [ 4758.913299] __mutex_lock+0x1469/0x1560 [ 4758.913408] _cma_cancel_listens+0x312/0x3b0 [ 4758.913413] _destroy_id+0x363/0xee0 [ 4758.913417] smbdirect_socket_destroy_sync+0x17d5/0x2440 [ 4758.913443] smbdirect_socket_release+0x124/0x230 [ 4758.913451] ksmbd_rdma_stop_listening+0x9f/0x190 [ 4758.913457] ksmbd_conn_transport_destroy+0x65/0x3c0 [ 4758.913463] kill_server_store+0x1fb/0x2b0 [ 4758.913501] kernfs_fop_write_iter+0x349/0x4d0 [ 4758.913507] vfs_write+0x5e7/0xc70 [ 4758.913528] ksys_write+0x12a/0x210 [ 4758.913541] do_syscall_64+0x135/0x460 [ 4758.913555] entry_SYSCALL_64_after_hwframe+0x77/0x7f The cosmetic one: releasing a child recurses into smbdirect_socket_destroy(), which takes the child's own rdma_lock_handler() lock nested under the listener's. The listener's and the child's cm_id are always different instances, so this cannot deadlock for real; the CM core itself nests a new connection id's handler_mutex under the listening id's in cma_ib_req_handler(). But lockdep only sees one lock class, reports possible recursive locking, and then disables itself, hiding real locking bugs for the rest of the run: [ 2424.579653] WARNING: possible recursive locking detected [ 2424.581180] 7.1.0-next-20260623+ #89 Not tainted [ 2424.582548] -------------------------------------------- [ 2424.584500] ksmbd.control/8854 is trying to acquire lock: [ 2424.586817] ffff888102303c20 (&id_priv->handler_mutex){+.+.}-{4:4}, at: smbdirect_socket_destroy_sync+0xc39/0x2440 [ 2424.590590] [ 2424.590590] but task is already holding lock: [ 2424.591601] ffff888102046c20 (&id_priv->handler_mutex){+.+.}-{4:4}, at: smbdirect_socket_destroy_sync+0xc39/0x2440 [ 2424.594178] [ 2424.594178] other info that might help us debug this: [ 2424.596634] Possible unsafe locking scenario: [ 2424.596634] [ 2424.598841] CPU0 [ 2424.599765] ---- [ 2424.600695] lock(&id_priv->handler_mutex); [ 2424.601836] lock(&id_priv->handler_mutex); [ 2424.602590] [ 2424.602590] *** DEADLOCK *** [ 2424.602590] [ 2424.604512] May be due to missing lock nesting notation Splice the pending/ready children onto a local list under the listener's listen.lock, while the handler lock is held so a concurrent CM CONNECT_REQUEST cannot add more, but defer the actual smbdirect_socket_release() calls until after the listener's cm_id has been destroyed and its handler lock dropped. The children are independent sockets whose teardown needs neither the listener's handler lock nor its cm_id. Found with ksmbdzzer [2], a KSMBD fuzzer that drives libFuzzer with a kcov-dataflow [1] coverage vector: it folds each instrumented comparison/argument's runtime operand value together with its PC (the default arm mixes them as pc⊕val) so that a new operand value at a known site counts as new coverage. [1] https://lwn.net/Articles/1077606/ [2] https://github.com/yskzalloc/kcov-dataflow | ||||
| CVE-2026-90113 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netdevsim: update queue NAPI association on queue reset In netdevsim, receive queues (struct nsim_rq) embed their own struct napi_struct. When queue reset is performed (e.g. via queue_reset debugfs), nsim_queue_start() swaps in a newly allocated struct nsim_rq, and nsim_queue_mem_free() later deletes and frees the old one. However, nsim_queue_start() failed to update the queue-to-NAPI mapping via netif_queue_set_napi(). As a result, dev->_rx[idx].napi continued to point to the old NAPI struct. After the old queue was freed, a subsequent queue dump via Netlink (NETDEV_CMD_QUEUE_GET) triggered a KASAN slab-use-after-free read in nla_put_napi_id() when accessing rxq->napi->napi_id. Fix this by calling netif_queue_set_napi() in nsim_queue_start() to associate the new NAPI with the RX queue, and clear the association with netif_queue_set_napi(..., NULL) in nsim_del_napi() during teardown. | ||||
| CVE-2026-90116 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: mtpav: shut down output timer before card teardown snd_mtpav_output_timer() rearms chip->timer while holding chip->spinlock and accesses the card-private mtpav state. snd_mtpav_free() currently takes the same lock and calls timer_delete() when the timer is active. This only removes a pending timer; it does not wait for a callback that is already running and does not prevent the callback from rearming the timer. A callback running on another CPU can therefore continue after snd_mtpav_free() releases the lock and access the card-private state while the card is being torn down. It can also rearm the timer after timer_delete() has returned. Call timer_shutdown_sync() without holding chip->spinlock. This waits for any running callback to finish and prevents further rearming before the card-private mtpav state is released. | ||||