Export limit exceeded: 412654 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (412654 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97978 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: eth: ice: don't dereference pointers from TP_printk() After forwarding net-next during the v7.3 merge window we started seeing: TRACE EVENT ERROR: Event ice_tx_dim_work has double dereference in TP_printk: REC->q_vector->tx.tx_ring->q_index WARNING: kernel/trace/trace_events.c:420 at test_double_dereference.cold+0x39/0x4b this is due to extra checks added in tracing subsystem in commit b5cc230af5e5 ("tracing: Warn when an event dereferences a pointer in TP_printk()"). Printing happens long after the event was recorded, by which point the pointers may be invalid (the ring or the dim instance). Copy the eight scalars into the event instead. | ||||
| CVE-2026-97975 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sysfs: Fix NULL pointer dereference in device_del() A NULL pointer dereference in klist_put() occurs when a child device (such as a BNEP network device in bnep_session) is concurrently being unregistered while hci_conn_del_sysfs() reparents child devices. This is caused by a race condition between hci_conn_del_sysfs() and concurrent child device unregistration (e.g. bnep_session calling unregister_netdev()). During device unregistration, device_del() snapshots a non-NULL parent pointer. Concurrently, hci_conn_del_sysfs() finds the child device using device_find_any_child() and calls device_move() to reparent it to NULL, which removes the node from its parent's klist and clears knode_parent. Subsequently, device_del() calls klist_del(&dev->p->knode_parent) using the stale parent snapshot, causing klist_put() to dereference knode_klist(n)->put on an already removed node, resulting in a NULL pointer dereference. This race was introduced by commit 27aabf27fd01 ("Bluetooth: fix use-after-free in device_for_each_child()"), which replaced device_find_child(..., __match_tty) with device_find_any_child() in hci_conn_del_sysfs(). That change was intended to avoid a use-after-free where conn->dev outlived its parent hdev->dev when child devices held references to conn->dev, because conn->dev only held a reference to hdev->dev while registered in sysfs. Fix the issue properly by taking an explicit reference to the parent device with get_device(&hdev->dev) in hci_conn_init_sysfs() and dropping it with put_device(parent) in bt_link_release() when the conn device is freed. This ensures that hdev->dev remains valid for the entire lifecycle of conn->dev, resolving the underlying use-after-free. With the parent reference held properly, restore the __match_tty filter in hci_conn_del_sysfs() so that device_move() is only invoked on persistent RFCOMM TTY devices as originally intended, eliminating the race condition with unregistering network devices. | ||||
| CVE-2026-97965 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: initialize _md in vxlan_xmit_one() If a VXLAN device is configured with both VXLAN_F_COLLECT_METADATA and VXLAN_F_GBP, and a packet is transmitted through it using an external ip_tunnel_info that lacks the IP_TUNNEL_VXLAN_OPT_BIT flag, md is left pointing to the uninitialized _md stack variable: if (test_bit(IP_TUNNEL_VXLAN_OPT_BIT, info->key.tun_flags)) { if (info->options_len < sizeof(*md)) goto drop; md = ip_tunnel_info_opts(info); } Because IP_TUNNEL_VXLAN_OPT_BIT is not set, md is not updated and remains pointing to _md. Later, vxlan_build_skb() is called with md, which eventually calls vxlan_build_gbp_hdr(): if (vxflags & VXLAN_F_GBP) vxlan_build_gbp_hdr(vxh, md); Inside vxlan_build_gbp_hdr(), md->gbp is read: if (!md->gbp) return; gbp = (struct vxlanhdr_gbp *)vxh; ... if (md->gbp & VXLAN_GBP_DONT_LEARN) gbp->dont_learn = 1; If the stack contains garbage, this causes: 1) VXLAN_HF_GBP flag to be spuriously set in the VXLAN header. 2) gbp->dont_learn and gbp->policy_applied to be set from stack bits. 3) gbp->policy_id to receive 16 bits of uninitialized kernel stack data, leaking it onto the wire. Fix this by zero-initializing _md. If IP_TUNNEL_VXLAN_OPT_BIT is not present, md->gbp remains 0, and vxlan_build_gbp_hdr() returns early without modifying the VXLAN header. | ||||
| CVE-2026-97962 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Move representor vnic reporter to eswitch devlink port The representor vnic devlink health reporter is created and destroyed along the representor netdev (un)load path, which is not serialized by the devlink instance lock. Destroying the reporter from there triggers a devl_assert_locked() splat on driver unbind: WARNING: net/devlink/core.c:259 at devl_assert_locked+0x54/0x70, CPU#2: bash/3758 Modules linked in: mlx5_vdpa vringh vdpa mlx5_ib mlx5_fwctl mlx5_core ... CPU: 2 UID: 0 PID: 3758 Comm: bash Tainted: G W 6.19.0+ #1 PREEMPT Tainted: [W]=WARN Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), ... RIP: 0010:devl_assert_locked+0x54/0x70 Call Trace: <TASK> devl_health_reporter_destroy+0x3a/0x1b0 mlx5e_vport_rep_unload+0x12d/0x2b0 [mlx5_core] mlx5_eswitch_unregister_vport_reps+0x1b8/0x220 [mlx5_core] ? __esw_offloads_unload_rep+0x190/0x190 [mlx5_core] ? kernfs_remove_by_name_ns+0xc3/0xf0 device_release_driver_internal+0x3b2/0x560 unbind_store+0xce/0xf0 Move the reporter's lifecycle to the eswitch devlink port (un)register paths, which are already serialized by the devlink instance lock, and store the handle on mlx5_devlink_port. Use the port's mlx5_vport as the reporter priv since the diagnose callback only needs a device handle and a vport number, and mlx5_vport carries both and is initialized before any representor driver probes. | ||||
| CVE-2026-97961 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/core: Allow list_del during perf_event_overflow() A PMU might use perf_sched_cb_inc() and perf_sched_cb_dec() interface to get the PMU call back function pmu::sched_task invoked at schedule in and schedule out. This is achieved by walking along the list anchored by sched_cb_list. The following scenario might lead to a list corruption. perf_pmu_sched_task() for_each_list_entry(..., &sched_cb_list) +--> __perf_pmu_sched_task() +--> event->pmu->sched_task()) +--> PMU_push_sample() +--> perf_event_overflow() +--> __perf_event_overflow() +--> pmu->stop() +--> perf_sched_cb_dec() remove entry from sched_cb_list while list node in use. This happens when ioctl(fd, PERF_EVENT_IOC_REFRESH, xxx) has been invoked and perf_event::event_limit hits zero. Prevent the list corruption and convert for_each_list_entry() to for_each_list_entry_safe(). | ||||
| CVE-2026-97960 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Prevent drain_pebs() reentry The PEBS buffer is shared by all events on a CPU, so drain_pebs() must not be reentered. If so, one instance may observe stale buffer state and potentially access out-of-bound memory. Most invocations happen in NMI context, which naturally prevents reentry. However, drain_pebs() is also reachable from process context via intel_pmu_drain_pebs_buffer(). In those paths, the PMU is often already disabled, but not guaranteed. For example, __intel_pmu_pebs_disable() only disables the target counter, so other active counters can still raise a PMI and interrupt an in-flight drain_pebs(). Here is an example, __perf_addr_filters_adjust() perf_event_stop() __perf_event_stop() x86_pmu_stop() (event->pmu->stop) intel_pmu_disable_event() intel_pmu_pebs_disable() __intel_pmu_pebs_disable() intel_pmu_drain_large_pebs() intel_pmu_drain_pebs_buffer() Introduce __intel_pmu_quiesce() and __intel_pmu_resume() helpers and use them in intel_pmu_drain_large_pebs() to disable the full PMU around the intel_pmu_drain_pebs_buffer() call, preventing reentry. Also add a warning in intel_pmu_drain_pebs_buffer() when the full PMU is not disabled. | ||||
| CVE-2026-97953 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix TX descriptor availability check for TSO traffic stmmac_tso_xmit() estimates the number of free TX descriptors required by a TSO skb as: (skb->len - proto_hdr_len) / TSO_MAX_BUFF_SIZE + 1 which assumes the payload is split into TSO_MAX_BUFF_SIZE chunks. This underestimates the descriptors actually consumed by stmmac_tso_allocator(), since each fragment is mapped individually and so it needs at least one descriptor regardless of its size. Moreover, one descriptor is used for the L2/L3/L4 headers and, when the MSS changes, one more is consumed for the MSS context descriptor. For a highly fragmented TSO skb the check can therefore pass even when the ring has too few free slots. stmmac_tso_allocator() then writes past the available descriptors, overwriting descriptors still owned by the DMA engine, corrupting the TX ring. Add stmmac_tso_get_num_desc() to compute the exact number of descriptors needed for the header, the linear payload and each fragment, plus the MSS context descriptor when required, and use it in the availability check. | ||||
| CVE-2026-97950 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: configfs: pin the symlink target's dirent instead of chasing ->ci_dentry create_link() reads the target's configfs_dirent from item->ci_dentry->d_fsdata, relying on the item reference taken by get_target(). That reference pins the item, not its dentry: the dentry is pinned by DCACHE_PERSISTENT, which configfs_remove_dir() releases via simple_rmdir() while the item is still alive. A symlink racing with rmdir of its target can therefore find ->ci_dentry freed and its dirent released, triggering WARN_ON(!atomic_read(&sd->s_count)) in configfs_get(). Take the dirent in get_target() as well, under ->d_lock and atomically with the item reference, and pass it down to create_link(). A hashed dentry has not been killed yet, so its ->d_fsdata reference keeps the dirent alive there. | ||||
| CVE-2026-97949 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: configfs: unhash the dentry before dropping the item in rmdir configfs_get_config_item() treats a hashed dentry as proof that sd->s_element is a live config_item. configfs_rmdir() breaks that: simple_rmdir() leaves the dentry hashed, the last reference to the item is dropped right after, and the dentry is only unhashed by d_delete() once ->rmdir() has returned. configfs_symlink() resolves its target holding no lock on it, so get_target() can land in that window: BUG: KASAN: slab-use-after-free in config_item_get+0x26/0x90 get_target fs/configfs/symlink.c:128 [inline] configfs_symlink+0x4ab/0x1030 fs/configfs/symlink.c:185 Unhash in configfs_remove_dir(), while the item is still guaranteed to be there. A reference obtained just before that stays harmless, as create_link() rechecks CONFIGFS_USET_DROPPING, already set by configfs_detach_prep(). Both configfs_unregister_subsystem() paths d_drop() after detaching, so this only makes rmdir match them. | ||||
| CVE-2026-97939 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipmr: account multicast table and route memory A netadmin in a user+net namespace can create many IPv4 and IPv6 multicast routing tables with MRT_TABLE and MRT6_TABLE. Each unseen id allocates an mr_table via the shared mr_table_alloc(), links it into the per-net list, and leaves it until netns teardown. Those objects were not charged to memcg, so the host unreclaimable slab grows with the table count. Account mr_table allocations with GFP_KERNEL_ACCOUNT and mark the IPv4/IPv6 MFC caches SLAB_ACCOUNT. This matches the established handling of IP addresses, routes and alternate interface names. Unresolved MFC entries are still allocated from softIRQ with GFP_ATOMIC and are not charged. They expire after 10 seconds and are bounded by the socket receive queue; see commit 0079ad8e8dc3 ("ipmr: remove hard code cache_resolve_queue_len limit"). | ||||
| CVE-2026-97938 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: reboot: fix cad_pid use-after-free race cad_pid is a single kernel-wide struct pid pointer. proc_do_cad_pid() reads it and passes it to pid_vnr() without protecting the lifetime of the referenced struct pid. A concurrent writer can replace cad_pid and drop the final reference to the old struct pid after the reader has loaded the pointer but before pid_vnr() has finished dereferencing it, causing a use-after-free. kill_cad_pid() has the same lifetime race when it passes cad_pid to kill_pid(). At the time this issue was reported, an unprivileged user could reach the sysctl through user and PID namespaces because cad_pid was registered in pid_table[]. Moving cad_pid back to the global reboot sysctl table corrected that namespace and permission mismatch, but did not fix the underlying lifetime race. Fix this by treating cad_pid as an RCU-protected pointer at both read sites and by waiting for a grace period before dropping the old reference on the write side. call_rcu(&old_pid->rcu, ...) cannot be used here because free_pid() also queues pid->rcu; queueing the same rcu_head twice can corrupt the RCU callback list. Original KASAN crash stack: kernel/pid.c:545 pid_nr_ns() # reads freed pid->level kernel/pid.c:556 pid_vnr() # calls pid_nr_ns() kernel/pid.c:775 proc_do_cad_pid() # calls pid_vnr(cad_pid) | ||||
| CVE-2026-97935 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Set the trace clock before registering the histogram trigger hist_register_trigger() puts the trigger on the global named_triggers list in cmd_ops->init(), and only then sets the trace clock: if (data->cmd_ops->init) { ret = data->cmd_ops->init(data); if (ret < 0) goto out; } if (hist_data->enable_timestamps) { ret = tracing_set_clock(file->tr, hist_data->attrs->clock); if (ret) { hist_err(tr, HIST_ERR_SET_CLOCK_FAIL, errpos(clock)); goto out; } The clock string is not checked anywhere before that call, so a named trigger using common_timestamp with an unknown clock fails after it has already become findable. event_hist_trigger_parse() then frees it without taking it off the list, and the next lookup by name reads the freed object: ~# cd /sys/kernel/tracing/events/sched/sched_switch ~# echo 'hist:name=foo:keys=common_pid:ts=common_timestamp:clock=bogus' > trigger bash: echo: write error: Invalid argument ~# echo 'hist:name=foo:keys=common_pid' > trigger BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0 Read of size 8 at addr ffff88800915d760 by task init/1 find_named_trigger+0xac/0xc0 hist_register_trigger+0xc1/0x900 event_hist_trigger_parse+0x3146/0x6af0 event_trigger_write+0xce/0x160 Freed by task 63: kfree+0x154/0x420 trigger_kthread_fn+0xfd/0x160 Set the clock before the trigger is registered, so that nothing which can fail runs after it is published, the way commit 6f86bdeab633 ("tracing: Fix bad hist from corrupting named_triggers list") moved the registration below the rest of the setup. tracing_set_filter_buffering() is reference counted, so the init failure path has to drop the reference that the clock block now takes first. | ||||
| CVE-2026-97934 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix memory corruption from a "STACKTRACE" histogram key "cpu", "CPU", "stacktrace" and "STACKTRACE" are generic fields, defined with an offset and a size of zero so that the filter code can match them by name. parse_field() maps them onto their common_* equivalents for backward compatibility, but unlike the common_* names it hands the placeholder back to the caller instead of NULL. create_hist_field() takes a non-NULL field as a promise that the record carries a stacktrace and picks HIST_FIELD_FN_STACK, so the __data_loc word is read from offset 0, that is from common_type, and its low 16 bits are followed as an offset into the record. What is found there becomes the length of an unbounded memcpy. Pick an event whose id is small enough that the offset stays inside its own record and the length is a kernel text address: # cd /sys/kernel/tracing # echo 'hist:keys=STACKTRACE' > events/ftrace/print/trigger # echo hello > trace_marker Oops: general protection fault, probably for non-canonical address RIP: 0010:rb_next+0x23/0x60 </IRQ> RIP: 0010:memcpy+0xc/0x30 event_hist_trigger+0x2e7/0x12c0 Kernel panic - not syncing: Fatal exception in interrupt Leave the field NULL, which is what the comment above the branch says the code does and what common_stacktrace already does. FILTER_CPU and FILTER_COMM are left alone, their create_hist_field() branches never look at the field. | ||||
| CVE-2026-97933 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Take trace_array reference when opening a tracer options file When a tracer option file is opened, it is passed a descriptor that points to an element on the trace_array's topts array. This element has information to find the trace array and other information. It uses this element to take a reference of the trace_array so that the trace_array does not get removed while this file is opened. Unfortunately, there's a race condition where the element itself could be freed by the removal of the instance the trace_array represents causing a use-after-free as this element that is used to find the trace_array to increment its reference counter is also freed when the instance is removed. To solve this, add a trace_array_tracer_options_get() helper function that will take the address of the element that is passed to the open function by the inode->i_private pointer and search all the trace_arrays under a lock to find the one that the element's address is in the range of the trace_arrays topts array elements. When a match happens, that trace_array's reference would be increased. Note, there's a race where if an admin was deleting and creating trace instances at the same time and the memory of the old trace_array's array matched the memory of the new trace_array that it could in theory open the option from the wrong trace array. But we do not care because it would be stupid to perform that kind of action. As long as the only thing that can happen is that the option from the wrong trace array is used and doesn't crash the kernel it will only make the user confused. But if they are doing something stupid like this, they are already confused, so no harm done. | ||||
| CVE-2026-97929 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usbusx2y: validate URB actual_length in interrupt callback i_usx2y_in04_int() processes the interrupt URB data without checking urb->actual_length. A short transfer from a malfunctioning device would cause the handler to process uninitialized heap data from the kmalloc-allocated in04_buf, which is then copied to the mmap-accessible ctl_snapshot[] array. Fix by using kzalloc() for in04_buf to zero-initialize the buffer, and adding an actual_length check to skip processing on short transfers while still resubmitting the URB. | ||||
| CVE-2026-97928 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: skip the VMID 0 flush for VRAM Clear-on-release only runs on VRAM, which amdgpu_ttm_map_buffer() reaches via its direct MC address without programming a GART window, yet the wipe still forces a VMID 0 flush. On GFX11 (e.g. Navi33) that spurious SDMA flush can wedge the engine; only flush when a GART window is actually used. v2: Let amdgpu_ttm_map_buffer() return whether the VMID 0 flush is needed, and drive the clear and copy paths from that. (Christian) v3: Make the vm_needs_flush output parameter mandatory instead of allowing NULL. (Christian) (cherry picked from commit a306e406e570b74318ff7d80e5b07b540ca1d3a9) | ||||
| CVE-2026-97919 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Take the reference before publishing the named histogram trigger event_hist_trigger_named_init() puts the trigger on the global named_triggers list and only then takes the reference on the trigger it shares its histogram with: data->ref++; save_named_trigger(data->named_data->name, data); ret = event_hist_trigger_init(data->named_data); if (ret < 0) { kfree(data->cmd_ops); data->cmd_ops = &trigger_hist_cmd; } return ret; event_hist_trigger_init() fails when alloc_hist_pad() cannot allocate, and nothing takes the trigger back off the list on the way out. event_hist_trigger_parse() frees it, and the next lookup by name reads the freed object: BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0 Read of size 8 at addr ffff888009346860 by task init/1 find_named_trigger+0xac/0xc0 hist_register_trigger+0xc1/0xa00 event_hist_trigger_parse+0x3146/0x6af0 event_trigger_write+0xce/0x160 Freed by task 67: kfree+0x154/0x420 trigger_kthread_fn+0xfd/0x160 Do the reference first and publish once it has succeeded, so that nothing which can fail runs after the trigger becomes findable. | ||||
| CVE-2026-97918 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Undo the registration when enabling the histogram trigger fails Commit 6f86bdeab633 ("tracing: Fix bad hist from corrupting named_triggers list") described how a trigger that is registered but not on file->triggers ends up freed while still on the global named_triggers list, and moved the registration down so that hist_trigger_enable() follows it immediately. One path still gets there. hist_trigger_enable() adds the trigger and takes it straight back out when the event cannot be enabled: list_add_tail_rcu(&data->list, &file->triggers); update_cond_flag(file); if (trace_event_trigger_enable_disable(file, 1) < 0) { list_del_rcu(&data->list); update_cond_flag(file); ret--; } so the list walk in hist_unregister_trigger() matches nothing, test stays NULL, and the ->free() that would call del_named_trigger() is skipped. out_unreg falls through to out_free, which frees the trigger anyway: BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0 Read of size 8 at addr ffff8880091d3160 by task init/1 find_named_trigger+0xac/0xc0 hist_register_trigger+0xc1/0xa00 event_hist_trigger_parse+0x3146/0x6af0 event_trigger_write+0xce/0x160 Freed by task 69: kfree+0x154/0x420 trigger_kthread_fn+0xfd/0x160 Leave the trigger where hist_unregister_trigger() can find it and let that undo the registration, which is the only code that knows all of what cmd_ops->init() took: the named list entry, the hist_pad reference, the reference on the trigger a named histogram is shared with, and the copied cmd_ops. It also pairs the failed trace_event_trigger_enable_disable(), whose sm_ref and buffered event reference are otherwise left behind. Since ->free() releases trigger_data and, for a trigger that does not share its histogram, hist_data with it, out_unreg can no longer fall through to out_free. For a trigger that does share, hist_register_trigger() has already destroyed the caller's hist_data, so the fall-through was reading freed memory there as well. Move the enable_timestamps check in hist_unregister_trigger() above the ->free() call for the same reason: hist_data does not outlive it once the trigger being removed is the one that owns it. | ||||
| CVE-2026-97917 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Validate full buffer range in ivpu_to_cpu_addr Add a size parameter to ivpu_to_cpu_addr() and validate that the whole [vpu_addr, vpu_addr + size) range stays within the BO. | ||||
| CVE-2026-97916 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Validate firmware log buffer metadata The tracing log headers parsed by fw_log_print_buffer() reside in DMA-shared BOs that the NPU firmware can write to. fw_log_from_bo() validated log->header_size and log->size, but fw_log_print_buffer() re-read those same fields from shared memory afterwards, allowing a TOCTOU where firmware changes them between the check and the use, and making the host dereference out-of-bounds addresses while printing logs. Snapshot the validated values once with READ_ONCE() and pass them down explicitly in a new struct ivpu_fw_log_desc instead of re-reading them from the shared struct. | ||||