Export limit exceeded: 397912 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (397912 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97927 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ufs: create the root dentry after loading cylinder metadata ufs_fill_super() installed sb->s_root before it loaded the cylinder group structures for a writable mount: sb->s_root = d_make_root(inode); ... if (!sb_rdonly(sb)) if (!ufs_read_cylinder_structures(sb)) goto failed; When ufs_read_cylinder_structures() failed, the error path freed the in-core superblock information and set sb->s_fs_info to NULL while sb->s_root stayed installed. get_tree_bdev() then reached deactivate_locked_super(), and because s_root was present, generic_shutdown_super() called sync_filesystem() and the put_super operation. Both dereference UFS_SB(sb), which is now NULL, so a mount that fails only while reading the cylinder groups oopses during teardown. A crafted image whose first cylinder group cannot be read reaches this path. Load the cylinder group metadata first and create the root dentry last, so the superblock is published to the VFS only once it is fully set up. ufs_setup_cstotal() and ufs_read_cylinder_structures() take only the super_block and do not use the root inode, so the reordering is safe. | ||||
| CVE-2026-97926 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ufs: validate cylinder group metadata before caching it ufs_read_cylinder() copies the cylinder group index and the rotor positions straight from the on-disk group and caches them without any check: ucpi->c_cgx = fs32_to_cpu(sb, ucg->cg_cgx); ucpi->c_rotor = fs32_to_cpu(sb, ucg->cg_rotor); ucpi->c_frotor = fs32_to_cpu(sb, ucg->cg_frotor); ucpi->c_irotor = fs32_to_cpu(sb, ucg->cg_irotor); They are then used as indices during allocation and free: - c_cgx indexes the cylinder summary array as UFS_SB(sb)->fs_cs(ucpi->c_cgx), so a value past s_ncg writes a 32 bit count outside the s_csp allocation. - c_frotor becomes a bitmap scan start, start = c_frotor >> 3, and then length = ((s_fpg + 7) >> 3) - start. A start beyond the block bitmap wraps the unsigned length to a huge value, so ubh_scanc() walks far past the cylinder group buffers. c_irotor drives the inode bitmap the same way. A crafted image can set any of these freely, turning an ordinary allocation into an out of bounds access. Reject a cylinder group whose recorded index does not match the group being read, or whose rotors fall outside the group, before the metadata is cached. Valid filesystems keep cg_cgx equal to the group number and the rotors within the group, so only malformed images are rejected. | ||||
| CVE-2026-97925 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tick/broadcast: Plug clockevents replacement race 朱恺乾 reported and decoded the following race condition when a broadcast device is replaced: CPUA CPUB __tick_broadcast_oneshot_control() bc = tick_broadcast_device.evtdev; tick_install_broadcast_device(dev) clockevents_exchange_device(cur, dev) shutdown(cur); detach(cur); cur->handler = noop; tick_broadcast_device.evtdev = dev; tick_broadcast_set_event(bc, next_event); <- FAIL: arms a detached device. If the original broadcast device has a restricted interrupt affinity mask and the last CPU in that mask goes offline then the BUG() in tick_cleanup_dead_cpu() triggers because the clockevent device is not in detached state. The reason for this is that tick_install_broadcast_device() is not serialized vs. tick broadcast operations. The obvious cure is to serialize tick_install_broadcast_device() with tick_broadcast_lock against a concurrent tick broadcast operation. That requires to split clockevents_exchange_device() into two parts, one which does the exchange, shutdown and detach operation and the other which drops the module reference count. This is required because the module reference cannot be dropped while holding tick_broadcast_lock. Let clockevents_exchange_device() do both operations as before, but let the broadcast device code take the two step approach and do the device exchange under tick_broadcast_lock and drop the module reference count after releasing it. | ||||
| CVE-2026-97924 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing/user_events: Don't destroy fields when event removal fails destroy_user_event() destroys the event's fields before attempting to remove the trace event call. If user_event_set_call_visible() fails, e.g. because the event is still enabled and trace_remove_event_call() returns -EBUSY, the event is left registered with an irreversibly destroyed field list. Any subsequent interaction with the event then operates on an empty field list while it is still fully visible in tracefs. Move the field destruction after the call removal, and splice the field list back onto the event when the removal fails so the event remains in a consistent state. | ||||
| CVE-2026-97923 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Free histogram the var ref when its initialization fails create_var_ref() allocates a VAR_REF hist_field and then calls init_var_ref() to fill it in. When that fails the field is leaked. commit 656fe2ba85e8 ("tracing: Use hist trigger's var_ref array to destroy var_refs") made destroy_hist_field() return early for HIST_FIELD_FL_VAR_REF, since var refs are freed by walking the trigger's var_refs[] array instead. create_var_ref() adds the field to that array only after init_var_ref() has succeeded, so on this path the field is in neither place and nothing frees it. The call was correct when it was written, before var refs were taken out of destroy_hist_field(). init_var_ref() cannot free it either. The caller owns the field, so init_var_ref() undoes only its own string allocations and leaves the field alone. Freeing it there would leave create_var_ref() passing freed memory to destroy_hist_field(), which reads its flags. Call __destroy_hist_field(), which frees the field without consulting the flag. | ||||
| CVE-2026-97922 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Free histogram var refs regardless of how often they are referenced Using the same variable three or more times in one hist trigger leaks the variable reference and its strings when the trigger is removed. commit 656fe2ba85e8 ("tracing: Use hist trigger's var_ref array to destroy var_refs") made a trigger's var_refs[] array the only owner of a var ref: destroy_hist_field() returns early for HIST_FIELD_FL_VAR_REF, so the field expressions never destroy one. One entry, freed once, no count needed. commit 8bcebc77e85f ("tracing: Fix histogram code when expression has same var as value") then made repeated references share one object and added a count of them. Only the increment side exists, since those expressions still return early and never drop a reference, so __destroy_hist_field() sees how many references were created rather than how many are left. It frees when the decremented count is 0 or 1, so two references work and three or more leak. Sharing kept one array entry per object, and create_var_ref() searches and appends within a single trigger, so nothing outside it holds the object. Removing a trigger whose variables are still referenced is already refused by check_var_refs() with -EBUSY. Drop the count and free unconditionally. | ||||
| CVE-2026-97921 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Free histogram the field rejected for a bad modifier Writing a hist trigger whose value or variable carries a modifier that is not allowed there leaks the fields that were built for it. __create_val_field() takes the field from parse_expr() and stores it in hist_data->fields[] only after the modifier checks have run: hist_field = parse_expr(hist_data, file, field_str, flags, var_name, &n_subexprs); ... if (hist_field->flags & HIST_FIELD_FL_VAR) { if (hist_field->flags & (...)) goto err; } else { if (hist_field->flags & (...)) goto err; } hist_data->fields[val_idx] = hist_field; Both checks jump past that store, and the err label returns without freeing anything. The error unwinds to create_hist_data(), which calls destroy_hist_data() -> destroy_hist_fields(), and that reaches a field only by walking fields[]. A field that never got there is unreachable. commit e0213434fe3e ("tracing: Do not let histogram values have some modifiers") set ret to -EINVAL and fell through to the store, which left the field owned by fields[] and freed along with the rest of hist_data. Splitting the check into a value case and a variable case replaced that fall-through with a goto that skips it. With CONFIG_DEBUG_KMEMLEAK, 200 writes of # echo 'hist:keys=prev_pid:vals=next_pid.log2' > \ events/sched/sched_switch/trigger each correctly rejected with -EINVAL, leave 332 unreferenced objects (63744 bytes) reported at create_hist_field(); 200 install and remove cycles of a valid trigger leave none. A '.log2' field is two allocations, since create_hist_field() puts the plain field in operands[0] of the log2 field, and both are reported. Use destroy_hist_field() rather than __destroy_hist_field() so that operands[0] is freed as well. It returns early for HIST_FIELD_FL_VAR_REF, which is what an operand owned by hist_data->var_refs[] needs; the rejected field itself is never a var ref, because a var ref never carries a modifier flag. | ||||
| CVE-2026-97920 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Keep the entry count when the histogram stats allocation fails print_entries() uses n_entries both as the number of sort entries and as its own return value, so the -ENOMEM it stores when the stats allocation fails overwrites the count that the cleanup still needs: n_entries = tracing_map_sort_entries(map, ...); if (n_entries < 0) return n_entries; ... if (!stats) { n_entries = -ENOMEM; goto out; } ... out: tracing_map_destroy_sort_entries(sort_entries, n_entries); tracing_map_destroy_sort_entries() takes an unsigned int and loops up to it, so -ENOMEM arrives as 4294967284. It walks an array of at most map->max_elts pointers and calls destroy_sort_entry(), which dereferences and frees, on whatever lies past the end. Reading the hist file of a trigger with a .percent value, with that allocation forced to fail: BUG: KASAN: vmalloc-out-of-bounds in tracing_map_destroy_sort_entries+0xa0/0xb0 Read of size 8 at addr ffffc90000045000 by task init/1 tracing_map_destroy_sort_entries+0xa0/0xb0 hist_show+0x6f7/0x1df0 seq_read_iter+0x2b8/0x1190 vfs_read+0x176/0xa40 The buggy address belongs to a 4-page vmalloc region starting at ffffc90000041000 allocated at tracing_map_sort_entries+0x5c/0xd50 A few pages further the fault is fatal. The registers at the oops confirm the bound: the loop's end pointer less the array start, over the pointer size, is 4294967284. Return the error in a separate variable and leave n_entries holding the count, the way tracing_map_sort_entries() does on its own error path. The stats block is only entered for a value carrying .percent or .graph, which __create_val_field() has rejected since v6.3, so this cannot be reached in mainline as it stands. It becomes reachable again with "tracing: hist: let values keep the percent and graph modifiers", so it should be applied first. | ||||
| CVE-2026-97919 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Take the reference before publishing the named histogram trigger event_hist_trigger_named_init() puts the trigger on the global named_triggers list and only then takes the reference on the trigger it shares its histogram with: data->ref++; save_named_trigger(data->named_data->name, data); ret = event_hist_trigger_init(data->named_data); if (ret < 0) { kfree(data->cmd_ops); data->cmd_ops = &trigger_hist_cmd; } return ret; event_hist_trigger_init() fails when alloc_hist_pad() cannot allocate, and nothing takes the trigger back off the list on the way out. event_hist_trigger_parse() frees it, and the next lookup by name reads the freed object: BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0 Read of size 8 at addr ffff888009346860 by task init/1 find_named_trigger+0xac/0xc0 hist_register_trigger+0xc1/0xa00 event_hist_trigger_parse+0x3146/0x6af0 event_trigger_write+0xce/0x160 Freed by task 67: kfree+0x154/0x420 trigger_kthread_fn+0xfd/0x160 Do the reference first and publish once it has succeeded, so that nothing which can fail runs after the trigger becomes findable. | ||||
| CVE-2026-97918 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Undo the registration when enabling the histogram trigger fails Commit 6f86bdeab633 ("tracing: Fix bad hist from corrupting named_triggers list") described how a trigger that is registered but not on file->triggers ends up freed while still on the global named_triggers list, and moved the registration down so that hist_trigger_enable() follows it immediately. One path still gets there. hist_trigger_enable() adds the trigger and takes it straight back out when the event cannot be enabled: list_add_tail_rcu(&data->list, &file->triggers); update_cond_flag(file); if (trace_event_trigger_enable_disable(file, 1) < 0) { list_del_rcu(&data->list); update_cond_flag(file); ret--; } so the list walk in hist_unregister_trigger() matches nothing, test stays NULL, and the ->free() that would call del_named_trigger() is skipped. out_unreg falls through to out_free, which frees the trigger anyway: BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0 Read of size 8 at addr ffff8880091d3160 by task init/1 find_named_trigger+0xac/0xc0 hist_register_trigger+0xc1/0xa00 event_hist_trigger_parse+0x3146/0x6af0 event_trigger_write+0xce/0x160 Freed by task 69: kfree+0x154/0x420 trigger_kthread_fn+0xfd/0x160 Leave the trigger where hist_unregister_trigger() can find it and let that undo the registration, which is the only code that knows all of what cmd_ops->init() took: the named list entry, the hist_pad reference, the reference on the trigger a named histogram is shared with, and the copied cmd_ops. It also pairs the failed trace_event_trigger_enable_disable(), whose sm_ref and buffered event reference are otherwise left behind. Since ->free() releases trigger_data and, for a trigger that does not share its histogram, hist_data with it, out_unreg can no longer fall through to out_free. For a trigger that does share, hist_register_trigger() has already destroyed the caller's hist_data, so the fall-through was reading freed memory there as well. Move the enable_timestamps check in hist_unregister_trigger() above the ->free() call for the same reason: hist_data does not outlive it once the trigger being removed is the one that owns it. | ||||
| CVE-2026-97917 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Validate full buffer range in ivpu_to_cpu_addr Add a size parameter to ivpu_to_cpu_addr() and validate that the whole [vpu_addr, vpu_addr + size) range stays within the BO. | ||||
| CVE-2026-97916 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Validate firmware log buffer metadata The tracing log headers parsed by fw_log_print_buffer() reside in DMA-shared BOs that the NPU firmware can write to. fw_log_from_bo() validated log->header_size and log->size, but fw_log_print_buffer() re-read those same fields from shared memory afterwards, allowing a TOCTOU where firmware changes them between the check and the use, and making the host dereference out-of-bounds addresses while printing logs. Snapshot the validated values once with READ_ONCE() and pass them down explicitly in a new struct ivpu_fw_log_desc instead of re-reading them from the shared struct. | ||||
| CVE-2026-97915 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Limit firmware log name prints to field size The name in struct vpu_tracing_buffer_header is a fixed-size array populated by the NPU firmware. It is expected to be NUL-terminated, but nothing on the host side enforces this, so printing it with an unbounded string conversion would read past the field if the terminator is ever missing and expose adjacent bytes of the shared tracing BO through dmesg and the debugfs FW log output. Print at most as many characters as the name field holds, so the output never runs past it even if the string is not NUL-terminated. | ||||
| CVE-2026-97914 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel: ethosu: Fix ethosu_job_open() return value A WARN_ON() returns a 0 or 1, not the original negative errno. Just drop the WARN_ON() as the FD open will pass the return code to userspace and there's only one possible source of the error (drm_sched_entity_init()). | ||||
| CVE-2026-97913 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel: ethosu: Ensure cmd stream ends with a stop op While the QSIZE register setting should prevent an out of bounds access of the command stream, it is not clear whether the h/w generates an interrupt in this case as is required (to prevent a timeout). As a stop op is expected end of the command stream, let's just ensure it is present. A stop op in the middle of the command stream also makes no sense. | ||||
| CVE-2026-97912 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel: ethosu: Ensure SRAM size is 0 on mapping failure On a mapping failure of the SRAM, the SRAM size is left as non-zero. The probe will succeed as the error return is not checked since having SRAM is not a hard requirement. The non-zero size allows jobs to access SRAM which is left pointing to physical base address 0x0. | ||||
| CVE-2026-97911 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel: ethosu: Ensure SRAM region size matches job It is possible for userspace to set the job SRAM size to 0, but then still have SRAM accesses in the command stream. When the job SRAM size is 0, setting the region base register is skipped and a stale base address from a prior job is used. Check the region size against the job's SRAM size instead of just the size of the SRAM. The job's SRAM size was already checked against the total SRAM size. | ||||
| CVE-2026-97910 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: sprd: validate compress buffer sizes against fixed allocations sprd_platform_compr_open() allocates the stage 0 IRAM buffer (32K data area) and the stage 1 DDR buffer (2M data area) with fixed sizes, but sprd_platform_compr_copy() derives all copy lengths from the user controlled runtime->fragment_size and the write() count, never comparing them against the physical buffer sizes. The compress core only checks fragment_size * fragments for an u32 overflow in snd_compress_check_input(), so a local user can configure a logical buffer of up to ~4GB via SNDRV_COMPRESS_SET_PARAMS, far exceeding the fixed allocations. A fragment_size larger than the 32K IRAM data area makes the stage 0 copy_from_user() overflow past the IRAM allocation, and a buffer_size larger than the 2M DDR buffer makes the wrapping copy at the end of sprd_platform_compr_copy() write fully user controlled data past the buffer. No SNDRV_PCM_TRIGGER_START is needed, a write() in SETUP state reaches the copy callback directly. Reject parameters that do not fit into the fixed buffers in set_params(), and fix the advertised max fragment size: 128K never fitted into the 32K IRAM buffer. The caps values may have been carried over from the qdsp6 driver, which allocates its buffers according to the advertised maxima, unlike this driver. With 32K as max fragment size the advertised limits are self-consistent: 32K * 64 = 2M equals the DDR buffer size. Discovered by Atuin - Automated Vulnerability Discovery Engine. | ||||
| CVE-2026-97909 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: sti: initialize IRQ lock before requesting IRQ uni_reader_init() registers the shared IRQ before initializing reader->irq_lock. A pending interrupt can invoke the handler while the lock is still uninitialized. Initialize the lock before registering the IRQ so the interrupt path always sees valid lock state. | ||||
| CVE-2026-97908 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btqcomsmd: destroy RPMsg endpoints before freeing hci_dev The command and ACL RPMsg endpoints store struct btqcomsmd as their callback private data. The receive callbacks dereference btq->hdev without taking an hci_dev reference. The current teardown order frees the hci_dev before destroying the RPMsg endpoints in both the hci_register_dev() error path and the driver remove path. If WCNSS delivers data in that window, the endpoint callback can run with an already freed hci_dev and pass it to the Bluetooth core. For qcom_smd endpoints, rpmsg_destroy_ept() closes the channel and clears the callback under the channel recv_lock. The receive path holds the same lock while invoking the callback, so destroying the endpoints first both prevents new callbacks and serializes with any callback already running. Destroy the command and ACL endpoints before hci_free_dev(). Keep hci_unregister_dev() first during remove so the HCI core stops issuing operations before the transport endpoints are shut down. In the full registration-error cleanup path, return directly after freeing the hci_dev to avoid falling through to the partial-construction labels and destroying the endpoints twice. | ||||