Export limit exceeded: 429797 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (429797 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99721 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (aquacomputer_d5next) reject short status reports The HID raw_event callback runs before HID core validates the received report length. aqc_raw_event() reads device-specific status fields at fixed offsets, including multi-byte values, without first ensuring that the received buffer contains every field. A truncated report can therefore cause out-of-bounds reads and update hwmon state with unrelated data. The required length differs between supported devices and cannot be derived from the HID report descriptor. Define the minimum length needed by each asynchronous status format, select it while configuring the device, and reject reports that do not contain the last field accessed by that format. Keep the published length zero until probe configuration is complete, which also excludes legacy devices whose status is retrieved through feature reports. | ||||
| CVE-2026-99720 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: chipcap2: fix IRQ teardown ordering The threaded IRQs are currently requested before the hwmon device is registered. Since devres releases resources in reverse order, the hwmon device is unregistered before the IRQs are freed during driver teardown. An IRQ may therefore still run after the hwmon device has been released and access the stale data->hwmon pointer. Separate IRQ discovery from IRQ registration so that the IRQ numbers and alarm visibility flags are initialized before registering the hwmon device while the IRQs are released before the hwmon device during devres cleanup. | ||||
| CVE-2026-99719 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (lm87) Fix drvdata type confusion in vrm_show() and vrm_store() When an LM87 or ADM1024 device is probed with VID support enabled, reading from or writing to the vrm sysfs attribute triggers a driver data type confusion in vrm_show() and vrm_store() in drivers/hwmon/lm87.c. In lm87_probe(), the driver stores the struct lm87_data pointer on the I2C client via i2c_set_clientdata() and passes the struct i2c_client pointer as the drvdata argument to devm_hwmon_device_register_with_groups(), which attaches the attribute groups to the registered hwmon device with client as its driver_data. Unlike the other sysfs callbacks that retrieve client via dev_get_drvdata() and then obtain data via i2c_get_clientdata(), vrm_show() and vrm_store() assign dev_get_drvdata(dev) directly to struct lm87_data *. Dereferencing data->vrm therefore accesses the struct i2c_client instance at offsetof(struct lm87_data, vrm), causing vrm_show() to leak an unrelated byte from struct i2c_client to userspace and vrm_store() to corrupt a byte within struct i2c_client while failing to update the actual VRM value. Fix the problem by assigning the return value from dev_get_drvdata(dev) to struct i2c_client *client and using i2c_get_clientdata() to get the actual client data. | ||||
| CVE-2026-99718 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (peci/dimmtemp) Fix devres leak and UAF on concurrent unbind When a peci_dimmtemp device is unbound concurrently with its delayed initialization work (detect_work), newly allocated devm resources and the hwmon device are leaked, leading to a use-after-free when reading the lingering hwmon sysfs attributes. In peci_dimmtemp_probe(), detect_work is registered for cancellation via devm_delayed_work_autocancel(). During driver detach, devres_release_all() first moves all existing entries from dev->devres_head onto a local todo list before invoking their release callbacks in reverse order. If create_dimm_temp_info_delayed() is already running when devm_delayed_work_drop() calls cancel_delayed_work_sync(), create_dimm_temp_info() can allocate dimmtemp_label strings via devm_kzalloc()/devm_kasprintf() and register the hwmon device via devm_hwmon_device_register_with_info(), appending new devres entries to the now-empty dev->devres_head. Once the work finishes, devres_release_all() frees priv and priv->name from the local todo list without re-evaluating dev->devres_head, leaving the late devres allocations and registered hwmon device behind with a dangling priv pointer. Cancel detect_work synchronously in a driver .remove() callback instead of relying on devm_delayed_work_autocancel() so that the work is fully drained before devres_release_all() detaches dev->devres_head, allowing any devm resources registered by the delayed work to be released in proper reverse order. Also only schedule detect_work when check_populated_dimms() returns -EAGAIN so that probe failure paths do not leave delayed work pending. | ||||
| CVE-2026-99717 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/q54sj108a2) Add missing NULL pointer check When CONFIG_DEBUG_FS is enabled and per-client PMBus debugfs directory creation fails during pmbus_do_probe(), q54sj108a2_probe() passes the NULL pointer returned by pmbus_get_debugfs_dir() to debugfs_create_dir() without validation, creating its debugfs directory at the debugfs root instead of under the client directory. If pmbus_init_debugfs() fails to create the client directory, data->debugfs is left as NULL or an ERR_PTR, which pmbus_get_debugfs_dir() converts to NULL. Passing a NULL parent to debugfs_create_dir() places q54sj108a2_dir in the root of the debugfs filesystem and populates it with attribute files whose private data pointers reference psu->debugfs_entries. Because this root-level directory is outside the client debugfs hierarchy, PMBus core cleanup does not remove it on device unbind, leaking the debugfs entries and causing a use-after-free of the devm-allocated struct q54sj108a2_data if the orphaned files are accessed via q54sj108a2_debugfs_read() or q54sj108a2_debugfs_write() after device removal. Fix the problem by adding the missing NULL pointer check. | ||||
| CVE-2026-99716 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (coretemp) Set nr_cores only after core_data allocation succeeds In init_temp_data(), pdata->nr_cores is populated from topology_num_cores_per_package() before allocating pdata->core_data. If that allocation fails, init_temp_data() returns NULL with pdata->core_data still NULL and pdata->nr_cores set to a positive value. coretemp_add_core() logs the error without failing coretemp_cpu_online(), so the CPU still comes online with pdata->hwmon_dev registered. When the CPU is later taken offline (or the module is unloaded), coretemp_cpu_offline() calls get_temp_data(pd, cpu), which loops up to pdata->nr_cores and dereferences the NULL pdata->core_data pointer. Store the core count in a local variable and assign pdata->nr_cores only after pdata->core_data is allocated, preserving the invariant that pdata->nr_cores is zero whenever pdata->core_data is NULL. | ||||
| CVE-2026-99715 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvme-rdma: fix NULL queue->ctrl dereference on reconnect Since commit 2a8513091d2f ("nvme-rdma: parallelize I/O queue allocation and startup"), a reconnect that gets more I/O queues than before grows the tag set before the new queues are set up. queue->ctrl is only set by nvme_rdma_setup_io_queues(), so I/O submitted in between reaches nvme_rdma_queue_rq() on a queue that was never allocated and dereferences a NULL queue->ctrl: BUG: kernel NULL pointer dereference, address: 000000000000034c RIP: 0010:nvme_rdma_queue_rq+0x52/0xb90 Set queue->ctrl for every queue when allocating the controller. Such requests are then requeued like on any other queue that is not live. | ||||
| CVE-2026-99714 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvme: Do not drop the cdev reference twice when cdev_device_add() fails Since commit 9952f3882ecb ("nvme: fix cdev lifetime"), nvme_add_ns_cdev() and nvme_add_ns_head_cdev() take a reference to the namespace (or namespace head) before calling nvme_cdev_add(), to be dropped by the char device's release, nvme_cdev_rel(), and drop it themselves when nvme_cdev_add() fails. But when cdev_device_add() fails, nvme_cdev_add() has already put the device, and nvme_cdev_rel() has already dropped that reference: the caller drops it a second time. With one allocation failure injected into cdev_device_add() for a namespace on an NVMe over loop controller, deleting the controller gives, with native multipath: BUG: KASAN: slab-use-after-free in nvme_put_ns_head+0x21/0x140 Write of size 4 at addr ff1100000a4ea078 by task init/1 nvme_put_ns_head nvme_put_ns nvme_remove_namespaces nvme_do_delete_ctrl nvme_delete_ctrl_sync nvme_sysfs_delete Freed by task 1: kfree nvme_ns_remove nvme_remove_namespaces refcount_t: underflow; use-after-free. Take the reference in nvme_cdev_add() instead, right before cdev_device_add(), and let the callers neither take nor drop it. Add nvme_is_ns_cdev() for the check that nvme_cdev_rel() and nvme_cdev_add() now share. | ||||
| CVE-2026-99713 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Conditionally resched when retrying gPTE walk on A/D update failure Conditionally reschedule when retrying a guest PTE walk because the CMPXCHG to update A/D bits failed, e.g. because a different task/vCPU modified the relevant gPTEs. On kernels without involuntary preemption of some kind, a misbehaving guest can "capture" a pCPU effectively indefinitely and trigger soft lockups by continuously modifying its gPTEs such that the result of the walk is remains valid. | ||||
| CVE-2026-99712 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Conditionally resched when restarting REP string emulation When restarting emulation, e.g. of a REP-prefixed string instruction, conditionally reschedule as emulating guest writes can be deceptively slow and expensive, e.g. when shadow paging is in use and each write can trigger write tracking. In a perfect world, restarting emulation (or not) would be less arbitrary, e.g. would honor not only host events (NEED_RESCHED, signals, etc.) but also guest events (e.g. by checking kvm_vcpu_has_events()). Unfortunately, as pointed out by Sashiko, pio_in_emulated()'s read-ahead logic is baked into the restart logic, as KVM relies on restarting emulation to drain the cache and avoid duplicate reads from the I/O port. I.e. re-entering the guest on kvm_vcpu_has_events() or __xfer_to_guest_mode_work_pending() would introduce architecturally-incorrect, guest-visible changes. | ||||
| CVE-2026-99711 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Process each host MSR entry at most once when unwinding failed VM-Entry Add a missing "break" in the inner for-loop of the open coded mess that unwinds MSRs back to the pre-VM-Enter state when VMLAUNCH/VMRESUME VM-Fails due to a consistency check that is caught by hardware but missed by KVM. I.e. move on to the next MSR in the VM-Entry load list after performing a write using a value found in the VM-Exit load list. Processing *every* matching entry in the VM-Exit load list makes the processing quadratic, which is problematic if the load lists are full of MSRs that are expensive to emulate. E.g. writing APIC_BASE triggers kvm_recalculate_apic_map() and a whole pile of unnecessary work. Functionally, arbitrarily restoring the value of the first matching entry is "fine", because none of this is architecturally correct: the load lists are never supposed to have been used in the first place. In practice, it's likely a moot point as no well-behaved VMM will have multiple, diverging entries in the load lists. | ||||
| CVE-2026-99710 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Cap number of parent PTEs per SP at 1000 (the arbitrary rmap limit) When potentially reusing a shadow page, zap the shadow page if its number of parent PTEs exceeds KVM's (mostly) arbitrary rmap recycling threshold. Letting the guest create a (mostly) unbounded number of parent PTEs allows the guest to coerce KVM into creating lists containing millions of PTEs, effectively bounded only by the maximum number of shadow pages. Because PTE lists are simple singly linked lists, removal is O(n). Even worse, if a list is constructed just so, teardown can be O(n^2), e.g. if SPTEs are built such that zapping child SPTEs always zaps the last entry in the list. To cap things off, all paths that walk PTE lists do so while holding mmu_lock, without conditionally rescheduling. Using a doubly linked list would not address the issue, as removal would remain O(n) since KVM still wouldn't know where in the list to remove from. Removal could be made O(1) by storing a per-SPTE pointer, but that would largely defeat the purpose of reusing SPs, and would penalize well-behaved guests, especially for nested TDP where aliasing page tables is uncommon. So, cap the maximum number of parent PTEs at the rmap limit. In practice, well-behaved guests will likely never run afoul of the limit. E.g. when running Linux as L1 with TDP, the number of parent PTEs for a single SP tops out at under 200 (though undoubtedly obscure workloads can push it higher). Deliberately use a "greater than or equal" as opposed to rmap's strictly "greater than", as the rmap code checks the threshold immediately *after* inserting into the list, i.e. the limit is 1000 for rmaps, KVM just very briefly blows past it. Apply the check to both indirect and direct SPs, because while a fully direct MMU naturally limits the number of parent PTEs to '1', direct SPs in indirect MMUs have no such constraint. E.g. if the guest maps a huge PTE into many locations in its page tables, and KVM is backing the hugepage with a direct SP, i.e. with a series of smaller pages, then KVM could end up with a direct SP with many parents. Note, shadow_mmu_try_split_huge_pages() always restarts the rmap walk or bails entirely if it gets to the point where it tries to grab a SP, i.e. there is *no* pre-existing bug that would be tripped by zapping a SP and thus rmaps when getting a SP. | ||||
| CVE-2026-99709 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: inet: frags: limit the truesize of a reassembly queue The truesize of fragments in a reassembly queue is only bounded by the per netns ipfrag_high_thresh sysctl, which has no upper limit. inet_frag_reasm_finish() sums the truesize of all fragments in an int. If this sum reaches 2^32, it wraps, and the final sk_wmem_alloc adjustment of the socket owning the reassembled skb can cancel its own reference, leading to a use-after-free of this socket. This can be triggered from an unprivileged user/network namespace, raising ipfrag_high_thresh and using padded TUN packets, which keep a large truesize after being trimmed by ip_rcv_core(). Track the sum of the truesize of fragments in each queue, and refuse a fragment that would make it bigger than INT_MAX / 2. Callers kill the queue on this error. This bound is far above the needs of legitimate traffic. | ||||
| CVE-2026-99708 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: reject wrapped temporary address preferred lifetimes ipv6_create_tempaddr() raises a temporary address's preferred lifetime to regen_advance + age + 1 when the configured lifetime is too short. The result is stored in a u32, while regen_advance and age are unsigned long. If the sum wraps or is truncated, the stored lifetime can still be less than or equal to regen_advance + age. addrconf_verify_rtnl() then sees the new address as due for regeneration and creates another one. Temporary addresses are not limited by max_addresses since commit 4b08a8f1bd8c ("ipv6: remove max_addresses check from ipv6_create_tempaddr"), so this can cause unbounded address growth. With dad_transmits set to -1, a baseline kernel reached 2859 loopback addresses in two seconds. After storing the adjusted lifetime, verify that it is still greater than regen_advance + age. Reject the new address if the check fails. On an x86-64 KASAN kernel, the normal configuration created three IPv6 addresses. The negative dad_transmits, positive multiplication overflow, and large retransmission-time cases each left only the loopback and public addresses. An i386 defconfig and an x86-64 allmodconfig both built addrconf.o with W=1. | ||||
| CVE-2026-99707 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: flush deferred unmaps before dropping a failed folio collapse_file() can fail its reference-count or dirty-folio check after unmapping with TTU_BATCH_FLUSH. Both paths put back the isolated folio, then unlock it and drop the lookup reference before reaching the common try_to_unmap_flush(). The page-cache reference does not keep the folio stable once the lock is released. Another collapse can replace and free it. With its PTEs already gone, that collapse cannot flush the first task's per-task TLB batch, and retract_page_tables() skips short or unaligned VMAs. A CPU can therefore retain a user translation to the freed folio. This has been reproduced with unprivileged MADV_COLLAPSE on a memfd. Flush at out_unlock while the lookup reference and folio lock are still held. The common flush continues to cover the accumulated pagelist on both success and rollback, preserving batching on successful collapses. | ||||
| CVE-2026-99706 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm: fix address wraparound when scanning large folio PTEs numa_rebuild_large_mapping() and do_swap_page() can be tricked into generating an address wraparound, crashing the kernel. All that's required is to map a tail page of a large folio close enough to the start/end of the address space to e.g., make unsigned long addr_start = addr - (nr << PAGE_SHIFT); to wrap around. Let's fix it by providing a better helper, folio_scan_range(), that takes care of staying within VMA and page table boundaries while handling possible wraparounds. There are some nasty details, like not being able to use pmd_addr_end() in this context. Add some helpful comments for these cases. | ||||
| CVE-2026-99705 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm: memory: fix truncation removing mapped folios Ayush reported an issue that shmem/tmpfs folios are still mapped when truncating them on production: " BUG: Bad page cache in process ... pfn:... page dumped because: still mapped when deleted " I reproduced the issue with Ayush's reproducer [1] with the latest mm-unstable branch, and I got the following crash info. From the dump message, we can see that truncate_inode_folio() is really trying to remove mapped folios, which is incorrect. " [ 189.171977] page: refcount:3 mapcount:1 mapping:00000000fe168ee1 index:0x3880 pfn:0x191647 [ 189.171995] memcg:ffff0000cc073d40 [ 189.171997] aops:shmem_aops ino:3c01 dentry name(?):"memfd:runsc-memory" [ 189.172006] flags: 0x17fffef0002022d(locked|referenced|uptodate|lru| workingset|swapbacked|node=0|zone=2|lastcpupid=0x3ffff) ....... [ 189.172017] page dumped because: VM_BUG_ON_FOLIO(folio_mapped(folio)) [ 189.172026] ------------[ cut here ]------------ [ 189.172027] kernel BUG at mm/filemap.c:155! [ 189.172057] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP ....... [ 189.177721] CPU: 3 UID: 0 PID: 5521 Comm: repro Kdump: loaded Tainted: 7.3.0-rc4+ #277 PREEMPT(lazy) ....... [ 189.183986] Call trace: [ 189.184124] filemap_unaccount_folio+0xf0/0x1e8 (P) [ 189.184391] __filemap_remove_folio+0x34/0x160 [ 189.184633] filemap_remove_folio+0x4c/0xb0 [ 189.184859] truncate_inode_folio+0x34/0x58 [ 189.185087] shmem_undo_range+0x220/0x658 [ 189.185308] shmem_fallocate+0x2f0/0x470 [ 189.185527] vfs_fallocate+0x128/0x328 ...... [ 189.187078] el0t_64_sync+0x184/0x188 " After analysis, I believe the race exists between truncation and MADV_DONTNEED, and shmem's ->map_pages() merely makes the issue easier to reproduce. Since MADV_DONTNEED synchronously releases the pagetable page before calling tlb_flush_rmaps(), this could cause another thread's truncation to skip zap_pte_range() (due to pmd is none) but still observe the folio's mapcount as non-zero. A possible race scenario is as follows: CPU 0 CPU 1 shmem_fallocate madvise_dontneed_single_vma unmap_mapping_range ....... ...... (filemap_map_pages() remap folios) zap_pte_range truncate_inode_folio zap_empty_pte_table(pmd clear) unmap_mapping_folio ...... zap_pmd_range (saw pmd none, skip) filemap_remove_folio BUG_ON(folio_mapped) tlb_flush_rmaps(remove rmaps) To fix this issue, we should move the pmd clear operation (via zap_empty_pte_table()) to after tlb_flush_rmaps() and use sync_with_folio_pmd_zap() to sync with concurrent zapping, so that when we find a pmd_none() while unmapping a folio without holding the PTL, the folio's mappings are guaranteed to have been removed via tlb_flush_rmaps(). Meanwhile move the second pmd_none() check to where it belongs: if splitting zapped the PMD. | ||||
| CVE-2026-99704 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/page-writeback: avoid 32-bit overflow in dirty threshold shares The ratios used by __wb_calc_thresh() are scaled to parts per million, but the threshold and ratio operands are unsigned long. On 32-bit kernels, their multiplication can wrap before the result is assigned to u64. For example, with a threshold of 25600 pages and the default maximum ratio of 1000000, wb_max_thresh becomes 4125 pages instead of 25600. The shared threshold and minimum share calculations can overflow in the same way, producing incorrect per-writeback dirty limits. Use a u64 threshold for the three ratio multiplications and div_u64() to retain the existing division order and rounding. | ||||
| CVE-2026-99703 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix mremap deadlock when PMD sharing is possible move_hugetlb_page_tables() holds the mapping's i_mmap_rwsem for write while moving hugetlb PTEs. This prevents races with truncation and protects huge_pmd_unshare(), but the move loop must not call helpers that can acquire the same rwsem for read. huge_pte_alloc() can do that when the destination can use PMD sharing: it may call huge_pmd_share(), which takes i_mmap_rwsem for read while searching for a shareable PMD table. Calling it while the move path already holds i_mmap_rwsem for write can deadlock. Avoid that path for PMD-sized hugetlb mappings that can use PMD sharing. Instead of allocating or sharing the destination page table while moving, zap the source range and let the destination fault path populate or share the PMD lazily. Reuse the hugetlb unmap logic for the source-side zap by splitting the core loop out of __unmap_hugepage_range(). The wrapper keeps the existing tlb_start_vma(), tlb_end_vma() and huge_pmd_unshare_flush() behavior, while move_hugetlb_page_tables() can reuse the unmap loop with its existing mmu_gather. | ||||
| CVE-2026-99702 | 1 Linux | 1 Linux Kernel | 2026-11-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/vma: write lock source VMA before duplicating it in __split_vma() __split_vma() duplicates the source VMA before taking its VMA write lock, and until the VMA is write-locked, a concurrent thread might set VMA_MAYBE_GUARD_BIT, resulting in the duplication missing the flag. If this happens, then fork may fail to duplicate guard markers and, if a file-backed mapping, THP collapse may also discard the markers. Resolve this by taking the VMA write lock before vm_area_dup() and, since all callers of vm_area_dup() now hold the VMA write lock, assert that this is the case there, and add a comment to explain why it's needed. [ljs@kernel.org: add VMA write assert in vm_area_dup(), commit message touchup] | ||||