Export limit exceeded: 397915 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (397915 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97566 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: kernel: drop pending ADD_ADDR when removing ID0 The in-kernel MPTCP path manager can leave a stale ADD_ADDR announcement entry alive when removing the id 0 endpoint. This happens because the id 0 removal path does not tear down pending announcements, unlike the non-zero id path. When the PM later reselects id 0 after adding another signal endpoint, it finds the stale anno_list entry and hits WARN_ON_ONCE(mptcp_pm_is_kernel()) in mptcp_pm_announced_alloc(). Root cause: asymmetry between removal paths. - Non-zero id path: mptcp_nl_remove_subflow_and_signal_addr() calls mptcp_pm_remove_announced() to clean up. - Id 0 path: mptcp_nl_remove_id_zero_address() skips cleanup entirely. Fix by making the id 0 path symmetric: call mptcp_pm_announced_remove() and decrement add_addr_signaled before queuing the RM_ADDR. Subtle detail: signal endpoints are stored in anno_list with port 0, but msk_local carries the connection's local port. In other words, entries linked to ID0 paths should have port == 0. A follow-up patch will ensure that. mptcp_pm_announced_remove() uses use_port=true for comparison. So clear the port before the lookup. | ||||
| CVE-2026-97565 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reject short READ responses in CIFSSMBRead() CIFSSMBRead() reads DataLengthHigh, DataLength and DataOffset out of the READ_RSP returned by the server without first checking that a whole READ_RSP was actually received. The length of the response is recorded in rsp_iov.iov_len, but nothing constrains it to be at least read_rsp_size before those fields are dereferenced. A malicious or compromised SMB1 server can return a response shorter than the READ_RSP header, so that parsing the header itself reads past the end of the receive buffer. SMB1 is not negotiated by default; reaching this code requires an explicit vers=1.0 mount. Reject the response unless it is at least read_rsp_size bytes long. | ||||
| CVE-2026-97564 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reject userspace cifs.idmap descriptions cifs.idmap key descriptions carry authority-bearing fields (owner and group SIDs and uid/gid values in "os:"/"gs:"/"oi:"/"gi:" form) that the cifs.idmap upcall helper treats as kernel-originating inputs. Unlike its sibling cifs.spnego, the cifs.idmap key type has no vet_description hook, so userspace can create keys of this type through request_key(2)/add_key(2) and supply those fields without CIFS origin. A request_key(2) call with a non-NULL callout then drives a root usermodehelper upcall (/sbin/request-key -> cifs.idmap) that consumes the unvetted description in root context. Only accept cifs.idmap descriptions while CIFS is using its private root_cred to request the key. id_to_sid()/sid_to_id() already run under override_creds(root_cred), so the kernel-originated path is unaffected. This mirrors commit 3da1fdf4efbc ("smb: client: reject userspace cifs.spnego descriptions"), which applied the same restriction to cifs.spnego. | ||||
| CVE-2026-97563 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reject out-of-bounds DataOffset in CIFSSMBRead() The SMB1 synchronous read helper CIFSSMBRead() validates the server's DataLength against CIFSMaxBufSize and the caller's count, but never validates DataOffset. The copy source is formed as &pSMBr->hdr.Protocol + le16_to_cpu(pSMBr->DataOffset) and memcpy()'d for DataLength bytes with no check that the [DataOffset, DataOffset + DataLength) range lies within the response actually received from the server. A malicious or compromised SMB1 server can return a response carrying an in-range DataLength and a large DataOffset, driving the source pointer past the end of the response buffer. The memcpy() then copies adjacent kernel heap into the caller's read buffer (information disclosure), or reads unmapped memory and oopses (denial of service). SMB1 is not negotiated by default; reaching this code requires an explicit vers=1.0 mount. Both DataOffset and the received response length recorded in rsp_iov.iov_len are relative to the start of the SMB header, so reject the response unless DataOffset + DataLength fits within that length, using overflow-safe arithmetic, before forming the source pointer. The response length has been validated by the previous patch, so the DataOffset and DataLength fields can be read safely here. While here, make data_length unsigned. It holds a length derived from unsigned on-the-wire fields and is only ever compared against unsigned quantities; print it with %u accordingly, and add __func__ to the cifs_dbg() calls in this function. | ||||
| CVE-2026-97562 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: pin DFS superblock in iterator callback tcon_super_cb() stores a raw superblock pointer, but __cifs_get_super() takes its active reference only after iterate_supers_type() has dropped s_umount and its passive reference. Concurrent DFS automount expiry can therefore free the superblock before cifs_sb_active() uses it. A deterministic KASAN test reproduces the race as: BUG: KASAN: slab-use-after-free in cifs_sb_active+0x77/0x80 The same test passes with this change applied. Take the active reference in the callback while iterate_supers_type() still holds s_umount shared. cifs_put_tcp_super() remains the matching release. | ||||
| CVE-2026-97561 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: honor forceuid/forcegid when mapping SIDs to uid/gid When the administrator mounts with forceuid or forcegid (uid=/gid= mount options), they expect all files to appear owned by the specified user/group. However, several code paths unconditionally called sid_to_id() to overwrite cf_uid/cf_gid with server-provided values, ignoring the administrator's explicit override: - smb311_posix_info_to_fattr() (stat via POSIX extensions) - cifs_posix_to_fattr() (readdir via POSIX extensions) - parse_sec_desc() (CIFS ACL ownership mapping) This allowed an untrusted server to dictate local file ownership even when the mount was configured to force specific uid/gid values. Fix all three call sites to check CIFS_MOUNT_OVERR_UID and CIFS_MOUNT_OVERR_GID before calling sid_to_id(), following the same pattern already used by cifs_unix_basic_to_fattr() for unix extensions. | ||||
| CVE-2026-97560 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix one-byte OOB read in smb2_parse_native_symlink() When parsing a share-root relative native symlink, memcpy copies smb_target+1 (skipping the leading separator) but uses strlen(smb_target)+1 as the length, reading one byte past the allocated buffer. This fixes the following KASAN splat when accessing an SMB symlink with a target of '\a\b': BUG: KASAN: slab-out-of-bounds in smb2_parse_native_symlink+0x4f5/0xca0 Read of size 5 at addr ffff88800878fe21 by task netfsfuzz-execu/1 CPU: 1 UID: 0 PID: 1 Comm: netfsfuzz-execu Tainted: G N 7.2.0-11943-g2709dd5ae32f-dirty #1 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996) Call Trace: <TASK> dump_stack_lvl+0x7b/0xa0 print_report+0xd0/0x630 kasan_report+0xe5/0x120 kasan_check_range+0x105/0x1b0 __asan_memcpy+0x23/0x60 smb2_parse_native_symlink+0x4f5/0xca0 parse_reparse_point+0x68a/0x1530 reparse_info_to_fattr+0x752/0xa20 cifs_get_fattr+0x873/0x15b0 cifs_get_inode_info+0xc0/0x310 cifs_lookup+0x308/0xa70 __lookup_slow+0x122/0x2b0 lookup_slow+0x50/0x70 path_lookupat+0x525/0xaf0 filename_lookup+0x1f2/0x550 vfs_statx+0xd1/0x1a0 vfs_fstatat+0x65/0xc0 __do_sys_newfstatat+0x9a/0x120 do_syscall_64+0xdd/0x4a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2026-97559 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fail DACL rewrite when the new DACL exceeds 64K replace_sids_and_copy_aces() and set_chmod_dacl() accumulate the size of the DACL they build in a u16. That accumulator can wrap. validate_dacl() caps num_aces at (dacl_size - sizeof(struct smb_acl)) / 20, i.e. 3276 for a maximally sized DACL, while each rewritten ACE can grow to sizeof(struct smb_ace) (76 bytes) once its SID is replaced with one carrying SID_MAX_SUB_AUTHORITIES sub-authorities. The worst case is therefore sizeof(struct smb_acl) + 3276 * 76 = 248984 bytes, far beyond what a u16 can hold. A wraparound is reached with 863 ACEs. After the wraparound, ndacl_ptr->size becomes meaningless and the offset will point anywhere in the ACE array. As a result, we will see corruption of the DACL, which then gets sent to the server. This is not an out-of-bounds write as the allocation now covers the worst-case expansion, so writes will always go into the buffer. Adjust the code to use a u32 internally and return -EOVERFLOW in the overflow case. The operation must be refused, because a DACL can only hold 2^16-1 bytes on the wire and larger DACLs cannot be represented. set_chmod_dacl() carries the same pattern and is fixed the same way. It only wraps once the source DACL comes within roughly 380 bytes of the 64K ceiling, but the failure mode is identical. | ||||
| CVE-2026-97558 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix cifsFileInfo reference leak in deferred close When cifs_close() defers a close, it hands the cifsFileInfo reference of the closing struct file to the queued work. Each execution of smb2_deferred_work_close() drops one such reference. deferred_close_scheduled can be false while the work is pending: the workqueue clears PENDING when the callback starts to run, before the callback clears the flag under deferred_lock. A close in that interval requeues the running work, and the callback then clears the flag, leaving the requeued work pending with the flag down. A later cifs_open() can reuse the handle and its cifs_close() reaches the same branch: queue_delayed_work() fails because the work is still pending, but cifs_close() returns without dropping the closing file's reference. The cifsFileInfo count stays pinned and its tlink, dentry and server handle are leaked. Check the return value and hand off the reference only when work was actually queued. Otherwise, use the shared _cifsFileInfo_put(), like the mod_delayed_work() branch above: the pending execution already owns its reference. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-97557 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: avoid leaking refcount in cifs_queue_oplock_break() cifs_queue_oplock_break() unconditionally takes a reference on the target file before queueing cifs_oplock_break(). Only that work item decreases the reference counter again. If another oplock break arrives while that work is still queued, queue_work() will return false and not queue this second work item. As a result, we will never reach the point to drop the file reference again and are leaking this reference. This can be triggered when interacting with a slow-responding server. As a result, later unmount operations for this file system will fail with BUG: Dentry ... still in use (1) [unmount of cifs cifs] VFS: Busy inodes after unmount of cifs (cifs) kernel BUG at fs/super.c:777! Fix this by only incrementing the reference count if the work has been queued successfully. Taking it after queue_work() is safe because all three callers hold tcon->open_file_lock across the call and _cifsFileInfo_put() decrements under that same lock, so a worker that starts the handler in the window cannot drop the reference before it has been taken. | ||||
| CVE-2026-97556 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: avoid leaking refcount when cifs_sb_tlink() fails cifs_oplock_break() takes over the reference that cifs_queue_oplock_break() acquired when it queued the work, and drops it with _cifsFileInfo_put() once the break has been processed. Only in setups with "-o multiuser", cifs_sb_tlink() may fail, at which point cifs_oplock_break() returns without putting the file reference, mirroring the reference leak we already fixed in the companion patch to cifs_queue_oplock_break(). This would trigger a crash due to busy inodes on the next unmount: BUG: Dentry ... still in use (1) [unmount of cifs cifs] VFS: Busy inodes after unmount of cifs (cifs) Drop the reference on that path as well. Doing so before the out label mirrors the normal path, which also puts the reference before cifs_done_oplock_break(). Found by Sashiko code review. The failure path was not exercised at runtime. | ||||
| CVE-2026-97555 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix heap overflow in DACL owner/group rewrite When id_mode_to_cifs_acl rewrites an existing DACL, it allocates a buffer sized according to the on-disk DACL length reported by dacl_ptr->size. However, replace_sids_and_copy_aces may rewrite each ACE with a new owner/group SID obtained from the cifs.idmap upcall. Those SIDs can have up to SID_MAX_SUB_AUTHORITIES (15) sub-authorities, making each ACE up to 76 bytes (sizeof(struct smb_ace)). If the original DACL contains short SIDs (e.g., 1 sub-authority) while the replacement SIDs are long, the rewritten ACEs overflow the allocation. Fix this by always budgeting for worst-case SID expansion: allocate sizeof(struct smb_acl) plus num_aces * sizeof(struct smb_ace), which covers the smb_acl header and room for every ACE at maximum SID size. This replaces the previous split logic that used dacl_ptr->size for cifsacl mounts but num_aces * sizeof(struct smb_ace) for mode_from_sid mounts: both paths can trigger the same rewrite and need the same headroom. KASAN reports this as: BUG: KASAN: slab-out-of-bounds in build_sec_desc+0x1e8a/0x2680 [cifs] Write of size 4 at addr ffff8881a5e25374 by task chown/5298 ... The buggy address is located 0 bytes to the right of allocated 884-byte region [ffff8881a5e25000, ffff8881a5e25374) | ||||
| CVE-2026-97554 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: avoid using uninitialized SIDs in cifs_posix_to_fattr() cifs_posix_to_fattr() ignores the return value of posix_info_parse(). When a malformed POSIX directory entry is encountered (e.g. invalid SID lengths from an untrusted server), posix_info_parse() returns -1 without populating the 'parsed' struct. The uninitialized stack memory in parsed.owner and parsed.group is then passed to sid_to_id(), which processes the garbage bytes and passes them to request_key() to construct a SID string, potentially leaking kernel stack contents to the userspace idmap daemon. Fix this by checking the return value and skipping the SID-to-id mapping when parsing fails. The remaining fattr fields (timestamps, mode, etc.) are populated directly from the 'info' pointer so they are unaffected. | ||||
| CVE-2026-97553 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfs: lock the healthmon when inserting unmount event LOLLM complains that xfs_healthmon_unmount does an unlocked insert of the unmount event into the health monitor's event list. Fix that. | ||||
| CVE-2026-97552 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfs: initialise error in xfs_defer_finish_one() xfs_defer_finish_one() declares error without an initialiser and only assigns it inside the loop over dfp->dfp_work. When that list is empty the loop body never runs, control falls through to the "Done with the dfp, free it" path, and the function returns an indeterminate value. An item-less pending item reaches this through xfs_defer_add_barrier(), which xfs_reap_ag_blocks() uses on any CONFIG_XFS_ONLINE_REPAIR kernel. xfs_defer_finish_noroll() treats any non-EAGAIN return as fatal, so a non-zero stack value turns a successful barrier into a SHUTDOWN_CORRUPT_INCORE in the middle of a repair. Zero is the correct result: reaching the free path means the item loop drained without a non-zero error. | ||||
| CVE-2026-97551 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfs: initialise args->total for parent pointer updates xfs_parent_da_args_init() builds an xfs_da_args from a zeroed xfs_parent_args (kmem_cache_zalloc), leaving args->total == 0. xfs_da_grow_inode_int() treats that field as a running block reservation and subtracts from it; because it is an xfs_extlen_t (uint32_t), the first attr-fork growth wraps it to ~0U. That defeats the free-space check in xfs_alloc_space_available(), and when it coincides with an AG that has exactly zero available blocks the allocation is clamped to maxlen 0 and returns -ENOSPC, which xfs_defer_finish_noroll() escalates to a filesystem shutdown. Set args->total the way the log recovery path does (xfs_attri_recover_work(), xfs_attr_item.c:706), in the add and replace paths that can grow the fork. Removals and lookups never grow it, so they leave the field alone, matching that switch. | ||||
| CVE-2026-97550 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix unit conversions in per_binval computation LOLLM noticed that we're doing the unit conversion in the per_binval computation backwards -- xfs_buf_inval_log_space's second parameter is supposed to be in bytes, but max_binval is in units of fsblocks. Hence the conversion should be FSB -> B, not the other way around. | ||||
| CVE-2026-97549 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix under-reservation of blocks when repairing sf directories Whilst running QA on XFS for-next as of 7.3-rc2 with MKFS_OPTIONS="-n size=8192", I observed the following (trimmed) dmesg splat: XFS: Assertion failed: args->total >= dp->i_nblocks - nblks, file: fs/xfs/libxfs/xfs_da_btree.c, line: 2387 WARNING: fs/xfs/xfs_message.c:104 at assfail+0x46/0x4a [xfs], CPU#0: xfs_scrub/1426511 CPU: 0 UID: 0 PID: 1426511 Comm: xfs_scrub Tainted: G W 7.3.0-rc2-djwx #rc2 PREEMPT(lazy) 6e418570b606a39783b0e7e7b30dc407b965f9e8 Tainted: [W]=WARN RIP: 0010:assfail+0x46/0x4a [xfs] RSP: 0018:ffffc900010d7890 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000ffffffd1 RDX: 0000000000000000 RSI: 0000000000000021 RDI: ffffffffa059fd38 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000000a R11: 000000007fffffff R12: ffffc900010d7940 R13: ffff888368d8f980 R14: ffffc900010d7a48 R15: ffffc900010d78d0 FS: 00007f445c5ce680(0000) GS:ffff8884a97ea000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f443803b9a8 CR3: 0000000107a4b000 CR4: 00000000003506f0 Call Trace: <TASK> xfs_da_grow_inode_int+0x2e0/0x300 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] xfs_dir2_grow_inode+0x6e/0x150 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] xfs_dir2_sf_to_block+0x149/0x870 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] xrep_dir_swap_prep+0xe2/0x110 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] xrep_dir_swap+0xfb/0x2f0 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] xrep_dir_rebuild_tree+0x99/0x100 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] xrep_directory+0x83/0x1c0 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] xrep_attempt+0x4f/0x1e0 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] xfs_scrub_metadata+0x393/0x5b0 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] xfs_ioc_scrubv_metadata+0x306/0x570 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] xfs_file_ioctl+0xa4f/0x1150 [xfs 5de2257e14108c136f11317e6bbb8ac77efd392c] __x64_sys_ioctl+0x76/0xc0 do_syscall_64+0x7a/0x3b0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 This is a consequence of commit 0fe77e57588b98, which added the following assertion to xfs_da_grow_inode_int: ASSERT(args->total >= dp->i_nblocks - nblks); Tracing this back to xrep_dir_swap_prep, I noticed that the xfs_da_args object that's passed to xfs_dir2_sf_to_block sets args->total to 1. This is incorrect because mkfs set the directory block size to 8k and the filesystem block size to 4k. In other words, args->total should be 2 here, not 1. Dave Chinner tripped over the same problem with the same branch through a different channel -- his test setup set the fs block size to 1k, in which case the directory block size is still set to 4k. Here, args->total should be 4. Changing the assignment of args->total to sc->mp->m_dir_geo->fsbcount makes the assertion go away, but that isn't a complete fix. In xrep_tempexch_estimate, we also incorrectly assume that a shortform conversion requires 1 fsblock when it should be m_dir_geo->fsbcount. Without that, we can under-reserve space in the transaction and cause a filesystem shutdown. Note that the xfs_dabuf_nfsb helper will compute the correct value for directories and xattr, so we use that instead of open-coding the logic. Also fix xrep_xattr_swap_prep to assign args->total via xfs_dabuf_nfsb to avoid one logic bomb if we ever support multi-fsblock attrs. Tripped-by: 0fe77e57588b98 ("xfs: assert the reservation covers each da fork growth") | ||||
| CVE-2026-97548 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix the rtrmap and rtrefcount _maxlevels_ondisk functions The _maxlevels_ondisk functions are used to compute the size of in-memory btree cursors for each btree type. Unfortunately, LOLLM noticed that the rtrmap and rtrefcount versions of these functions forget to account for the inode root, which means that we could access beyond the end of the cursor given a sufficiently large btree. Fix this. | ||||
| CVE-2026-97547 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix exchange-range reflink flag clearing issue with INO1_WRITTEN When exchanging two full-file ranges, xmi_can_exchange_reflink_flags() can move the reflink inode flag from the file that currently has it to the other file, as long as exactly one side is marked. This assumes that the file contents, and therefore all shared extents, are exchanged. That assumption is not true when XFS_EXCHMAPS_INO1_WRITTEN is set. xfs_exchmaps_can_skip_mapping() can skip hole and unwritten mappings from file1, so an exchange can complete without moving every mapping that the earlier flag-swap decision accounted for. In that case the post-operation cleanup can clear the reflink flag from an inode that still owns shared written extents. Later writes then take the non-reflink write path and may update blocks that should still have been protected by CoW, which shows up as data corruption between reflink-related files. Fix this by disabling the reflink flag exchange whenever XFS_EXCHMAPS_INO1_WRITTEN is requested. The contents exchange can still proceed; the conservative outcome is that both inodes keep the reflink flag. The regular reflink flag cleanup path can drop the extra flag later once the inode no longer has shared extents. | ||||