Export limit exceeded: 397947 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (397947 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97950 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: configfs: pin the symlink target's dirent instead of chasing ->ci_dentry create_link() reads the target's configfs_dirent from item->ci_dentry->d_fsdata, relying on the item reference taken by get_target(). That reference pins the item, not its dentry: the dentry is pinned by DCACHE_PERSISTENT, which configfs_remove_dir() releases via simple_rmdir() while the item is still alive. A symlink racing with rmdir of its target can therefore find ->ci_dentry freed and its dirent released, triggering WARN_ON(!atomic_read(&sd->s_count)) in configfs_get(). Take the dirent in get_target() as well, under ->d_lock and atomically with the item reference, and pass it down to create_link(). A hashed dentry has not been killed yet, so its ->d_fsdata reference keeps the dirent alive there. | ||||
| CVE-2026-97949 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: configfs: unhash the dentry before dropping the item in rmdir configfs_get_config_item() treats a hashed dentry as proof that sd->s_element is a live config_item. configfs_rmdir() breaks that: simple_rmdir() leaves the dentry hashed, the last reference to the item is dropped right after, and the dentry is only unhashed by d_delete() once ->rmdir() has returned. configfs_symlink() resolves its target holding no lock on it, so get_target() can land in that window: BUG: KASAN: slab-use-after-free in config_item_get+0x26/0x90 get_target fs/configfs/symlink.c:128 [inline] configfs_symlink+0x4ab/0x1030 fs/configfs/symlink.c:185 Unhash in configfs_remove_dir(), while the item is still guaranteed to be there. A reference obtained just before that stays harmless, as create_link() rechecks CONFIGFS_USET_DROPPING, already set by configfs_detach_prep(). Both configfs_unregister_subsystem() paths d_drop() after detaching, so this only makes rmdir match them. | ||||
| CVE-2026-97948 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/eeh: Fix recursive locking on devices without EEH sensitive driver The commit 1010b4c012b0 ("powerpc/eeh: Make EEH driver device hotplug safe") refactored the EEH code such that the pci_rescan_remove_lock is held at the beginning of eeh_handle_normal_event() and the eeh_reset_device() is called with that lock being held. Looks like the commit missed to remove the existing lock/unlock inside eeh_rmv_device() which is no longer necessary. This is causing the eehd to hang on the lock which it actually holds when that code path is taken. [<0>] 0xc00000011c78f870 [<0>] __switch_to+0xfc/0x1a0 [<0>] pci_lock_rescan_remove+0x30/0x44 [<0>] eeh_rmv_device+0x290/0x2e0 [<0>] eeh_pe_dev_traverse+0x80/0x130 [<0>] eeh_reset_device+0xcc/0x23c [<0>] eeh_handle_normal_event+0x830/0xa80 [<0>] eeh_event_handler+0xf8/0x190 [<0>] kthread+0x194/0x1b0 [<0>] start_kernel_thread+0x14/0x18 The issue is seen for cases where the errors are detected on the PHB directly AND|OR for devices where the driver error_detected() returns PCI_ERS_RESULT_NEED_RESET, and driver being not EEH sensitive(i.e no error handlers like slot_reset(), resume() etc defined). | ||||
| CVE-2026-97947 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: x86/amd_node: Fix potential NULL pointer dereference amd_smn_read/write() are exported functions around __amd_smn_rw(), so they are always available even if amd_smn_init() fails. In that case, 'amd_roots' is NULL and __amd_smn_rw() will access uninitialized memory. Then, commit: 83518453074d ("x86/amd_node: Add SMN offsets to exclusive region access") added the 'smn_exclusive' flag, which indicated the calls to pci_request_config_region_exclusive() succeeded, to prevent concurrent userspace access. Commit: 0a4b61d9c2e4 ("x86/amd_node: Fix AMD root device caching") re-ordered initialization so pci_request_config_region_exclusive() is called earlier and a failure exits amd_smn_init() before allocating 'amd_roots'. The setting of 'smn_exclusive' moved to the end of amd_smn_init(), after 'amd_roots' is allocated. It became redundant and can be removed. Replace 'smn_exclusive' with directly checking 'amd_roots', to fix a potential NULL pointer dereference and to simplify the logic. [ bp: Reorg commit message, touchup comment. ] [ mingo: Rebase & further touchups. ] | ||||
| CVE-2026-97946 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: x86/amd_node: Fix PCI device reference counting in amd_smn_init() The local "root" pointer is a temporary variable used during the device search. Therefore, refcount related to the search iterators should be cleaned up after the search is complete. Use the __free() cleanup macro to ensure the refcount is decremented when the temporary pointer goes out of scope. Additionally, increment the refcount when caching a root pointer. This ensures the in-use refcount is separate from the temporary search refcounting. Finally, drop the redundant "root = NULL" before the second search loop. The pci_get_class() iterator always decrements the refcount of its "from" argument, so the first loop can only fall through with "root" already NULL. | ||||
| CVE-2026-97945 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: x86/mm: Fix user-space data loss with MADV_FREE and THP Some of users of Polars (a data analytics library) have lost production data from this bug. They seem to have just the right combination of huge pages, MADV_FREE and heavy reclaim pressure. pmd_modify() masks the old value with (_HPAGE_CHG_MASK & ~_PAGE_DIRTY), silently discarding the hardware dirty bit. The subsequent pmd_mksaveddirty() call is supposed to transfer _PAGE_DIRTY into _PAGE_SAVED_DIRTY when write-protecting, but the dirty bit was already stripped from the value, so there is nothing left to transfer. Contrast with pte_modify(), which keeps _PAGE_DIRTY_BITS in its mask, and pud_modify(), which keeps _HPAGE_CHG_MASK untouched: pmd_modify() is the odd one out. Any pmd_modify() on a writable, dirty PMD loses the dirty state. One visible consequence is data loss with MADV_FREE on PMD-mapped THP: memset(buf, 0x5A, size); // PMD-mapped THP, PMD dirty madvise(buf, size, MADV_FREE); // PMD cleaned but left writable, // folio marked lazyfree memset(buf, 0x5A, size); // hardware sets _PAGE_DIRTY again mprotect(buf, size, PROT_READ); // pmd_modify() drops the dirty bit mprotect(buf, size, PROT_READ|PROT_WRITE); // ... memory pressure ... Reclaim (e.g. under memcg pressure) then finds the lazyfree folio with no dirty bit set anywhere and frees it in __discard_anon_folio_pmd_locked(), even though the data was rewritten after MADV_FREE; subsequent reads fault in fresh zero pages. NUMA hinting alone can trigger the same loss, as do_huge_pmd_numa_page() restores the PMD through pmd_modify() as well. PMD-mapped file THPs are affected too: mprotect()/NUMA hinting dropping the dirty bit means rewritten data is never written back. Fix it by keeping _PAGE_DIRTY in the preserved mask, exactly like pte_modify() and pud_modify() do. The existing pmd_mksaveddirty()/pmd_clear_saveddirty() pair then performs the hardware-dirty <-> saved-dirty transition based on the write bit, preserving the shadow-stack encoding rules. | ||||
| CVE-2026-97944 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: x86/cfi: Fix FineIBT hash offset in cfi_get_func_hash() The switch of the FineIBT preamble from "subl $hash, %r10d" to the shorter "subl $hash, %eax" moved the hash immediate from offset 7 to offset 5 of the preamble. fineibt_preamble_hash was updated to match, but the open-coded offset in cfi_get_func_hash() was missed and it still reads the hash at offset 7. cfi_get_func_hash() is used by the BPF JIT to give a struct_ops trampoline the CFI hash of the stub function it stands in for. With FineIBT the trampoline now gets the upper half of the real hash followed by the first two bytes of the next instruction, so the first indirect call from the kernel into a struct_ops program, tcp_init_congestion_control() calling ->init() of a BPF congestion control for example, fails the FineIBT check and the kernel dies with a CFI failure. Move the FineIBT preamble template and its offset defines above cfi_get_func_hash() and use fineibt_preamble_hash there, so every reader of the preamble shares one definition of its layout. The CFI_FINEIBT arm is only built with CONFIG_FINEIBT, the only configuration in which cfi_mode can take that value. cfi_get_func_arity() does not need the same treatment: the __bhi_args call whose displacement it reads still ends at the function address. | ||||
| CVE-2026-97943 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: x86/mm/pat: Acquire init_mm write lock on collapse to avoid UAF x86 implements page attribute modification using its Change Page Attributes (CPA) mechanism. This tracks properties of ranges such as cache mode through x86 page attributes, and as part of that logic manipulates kernel page tables. Since commit: 41d88484c71c ("x86/mm/pat: restore large ROX pages after fragmentation") ranges of kernel page table entries can be collapsed into huge page table entries as part of this logic. As part of this collapse, it frees the page tables which the collapsed entries previously pointed to, and it does so without any relevant locks being held to preclude concurrent kernel page table walkers. The only way this code can be reached is if CPA_COLLAPSE is specified, and this is only set in set_memory_rox() via: set_memory_rox() -> change_page_attr_set_clr() -> cpa_flush() -> cpa_collapse_large_pages() Notable users of this are execmem and BPF when manipulating executable mappings. However, this is problematic for ptdump as it walks ranges it does not own and thus runs the risk of a use-after-free on page tables freed underneath it. In addition, concurrent CPA collapse operations are possible which can also cause races. Resolve the issue by acquiring the mmap write lock on init_mm across the whole operation. It is safe to acquire a sleeping lock as all the callers invoke set_memory_rox() from process context and in any case, change_page_attr_set_clr() calls vm_unmap_alias() which ultimately takes a mutex, disallowing atomic context here. | ||||
| CVE-2026-97942 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: x86/alternatives: Exclude text poking against change_page_attr() From time to time, the following BUG can be observed in the x86 alternatives patching code [0]: > kernel BUG at arch/x86/kernel/alternative.c:2576! > Oops: invalid opcode: 0000 [#1] SMP NOPTI > CPU: 0 UID: 0 PID: 355 Comm: (udev-worker) Not tainted 7.1.3-1-default #1 PREEMPT(full) openSUSE Tumbleweed 8c1795b03ec64f997e57a8ad38b1161e3b98da64 > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS unknown 02/02/2022 > RIP: 0010:__text_poke+0x2aa/0x450 > Call Trace: > <TASK> > smp_text_poke_batch_finish+0x2a7/0x320 > __static_call_transform+0xb7/0x220 > arch_static_call_transform+0x5b/0xb0 > __static_call_init+0xe9/0x270 > static_call_module_notify+0x11f/0x150 > notifier_call_chain+0x61/0xe0 > blocking_notifier_call_chain_robust+0x63/0xc0 > load_module+0x1c92/0x20c0 > init_module_from_file+0xd8/0x140 > idempotent_init_module+0x100/0x2f0 > __x64_sys_finit_module+0x71/0xe0 > do_syscall_64+0xe1/0x610 > entry_SYSCALL_64_after_hwframe+0x76/0x7e which matches the following BUG_ON() in alternative.c: /* * If something went wrong, crash and burn since recovery paths are not * implemented. */ BUG_ON(!pages[0] || (cross_page_boundary && !pages[1])); This can happen if vmalloc_to_page() fails, for any reason. Such can happen if text poking races with CPA, which can possibly result in the collapsing of page tables (or breaking of PMD hugepages). It is not a problem for most users of vmalloc_to_page() (they solely own the vmalloc'd range) but, when CONFIG_ARCH_HAS_EXECMEM_ROX=y, various modules own a single execmem vmalloc range, and can call set_memory_*() in parallel on it. This can happen to race against __text_poke and cause havoc in vmalloc_to_page(). Fix it by excluding against CPA using the init_mm mmap read lock. [ dhansen: Fix up SoB ordering. The actual code flow here was: Pedro=>Lorenzo=>Mike=>Me which is reflected in the SoB chain now. I *believe* Mike simply picked up Lorenzo's update to Pedro's post from the Link ] | ||||
| CVE-2026-97941 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/slab: take n->list_lock in __slab_try_return_freelist() to avoid race Commit ba7425312607 ("mm, slab: add an optimistic __slab_try_return_freelist()") incorrectly assumed that nobody has freed an object to the slab as long as slab->freelist is NULL and cmpxchg succeeds. However, as reported by Hyunwoo Kim [1], other CPUs might have freed an object to the slab, insert the slab to the partial list, then allocated an object from the slab, and be in the middle of removing the slab from the list under n->list_lock. Since __refill_objects_node() puts the slab back on pc.slabs outside n->list_lock, it might insert the slab into that list while the slab is concurrently being removed from n->partial. This led to a list corruption [1]: list_add corruption. next->prev should be prev (ffff888100000248), but was dead000000000122. (next=ffffea000416e410). kernel BUG at lib/list_debug.c:29! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 1 UID: 65534 PID: 144 Comm: poc Not tainted 7.2.0-16172-gcf72cbb39da8-dirty #1 PREEMPT(lazy) RIP: 0010:__list_add_valid_or_report+0x80/0xd0 ... Call Trace: alloc_from_new_slab+0x183/0x300 ___slab_alloc+0x31c/0x890 __kmalloc_noprof+0x3d4/0x800 lsm_blob_alloc+0x2d/0x50 security_msg_msg_alloc+0x26/0x90 load_msg+0x1aa/0x210 do_msgsnd+0x91/0x800 do_syscall_64+0x109/0x5d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... Kernel panic - not syncing: Fatal exception This is a classic ABA problem where cmpxchg succeeds but the state has changed since __refill_objects_node() took the freelist from the slab. As Vlastimil Babka mentioned [2], it should be rare to return more than one slab (due to the racy read of slab->counters in get_partial_node_bulk()). Therefore, instead of introducing additional complexity, acquire and release n->list_lock twice in the worst case. Return the slab directly to the partial list and hold n->list_lock across the cmpxchg and add_partial(). This is similar to the initial version of commit ba7425312607 [3]. This is enough to avoid the race as the list manipulation is serialized by n->list_lock. While at it, bring back unlikely() hint now that the condition is unlikely. | ||||
| CVE-2026-97940 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: fix fib6 walker UAF on seq stop ipv6_route_iter_active() treats a walker in FWS_U at the table root as already unlinked. fib6_del_route() can move a still-linked walker into that same state when the current leaf is the last route at the root, so ipv6_route_native_seq_stop() skips fib6_walker_unlink(). The seq private object can then be freed while it remains on net->ipv6.fib6_walkers. A later route deletion walks the dangling list and uses the freed walker. Use the list head as membership state and reinitialize it when unlinking. Keep the existing w->node check so a never-started iterator with a zeroed private object is not treated as linked. The same stop helper is used by /proc/net/ipv6_route and by the BPF ipv6_route iterator. The BPF show path only widens the race. | ||||
| CVE-2026-97939 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipmr: account multicast table and route memory A netadmin in a user+net namespace can create many IPv4 and IPv6 multicast routing tables with MRT_TABLE and MRT6_TABLE. Each unseen id allocates an mr_table via the shared mr_table_alloc(), links it into the per-net list, and leaves it until netns teardown. Those objects were not charged to memcg, so the host unreclaimable slab grows with the table count. Account mr_table allocations with GFP_KERNEL_ACCOUNT and mark the IPv4/IPv6 MFC caches SLAB_ACCOUNT. This matches the established handling of IP addresses, routes and alternate interface names. Unresolved MFC entries are still allocated from softIRQ with GFP_ATOMIC and are not charged. They expire after 10 seconds and are bounded by the socket receive queue; see commit 0079ad8e8dc3 ("ipmr: remove hard code cache_resolve_queue_len limit"). | ||||
| CVE-2026-97938 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: reboot: fix cad_pid use-after-free race cad_pid is a single kernel-wide struct pid pointer. proc_do_cad_pid() reads it and passes it to pid_vnr() without protecting the lifetime of the referenced struct pid. A concurrent writer can replace cad_pid and drop the final reference to the old struct pid after the reader has loaded the pointer but before pid_vnr() has finished dereferencing it, causing a use-after-free. kill_cad_pid() has the same lifetime race when it passes cad_pid to kill_pid(). At the time this issue was reported, an unprivileged user could reach the sysctl through user and PID namespaces because cad_pid was registered in pid_table[]. Moving cad_pid back to the global reboot sysctl table corrected that namespace and permission mismatch, but did not fix the underlying lifetime race. Fix this by treating cad_pid as an RCU-protected pointer at both read sites and by waiting for a grace period before dropping the old reference on the write side. call_rcu(&old_pid->rcu, ...) cannot be used here because free_pid() also queues pid->rcu; queueing the same rcu_head twice can corrupt the RCU callback list. Original KASAN crash stack: kernel/pid.c:545 pid_nr_ns() # reads freed pid->level kernel/pid.c:556 pid_vnr() # calls pid_nr_ns() kernel/pid.c:775 proc_do_cad_pid() # calls pid_vnr(cad_pid) | ||||
| CVE-2026-97937 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ftrace: fork: Initialize function graph state before copy_exec_state() dup_task_struct() copies the parent's task_struct, including ret_stack. ftrace_graph_init_task() clears the copied function graph state, but it currently runs after copy_exec_state(). For non-CLONE_VM forks, copy_exec_state() allocates a new task_exec_state. If that allocation fails, copy_process() reaches bad_fork_free and free_task() calls ftrace_graph_exit_task(). Since the child still carries the parent's ret_stack pointer, the unwind frees the parent's active function graph return stack. The parent subsequently accesses freed memory from function_graph_enter_regs(). KASAN reports: [ 22.190920] ================================================================== [ 22.195899] BUG: KASAN: slab-use-after-free in function_graph_enter_regs+0xa76/0xb90 [ 22.200747] Write of size 8 at addr ff110000054dc0a8 by task repro/1 [ 22.205134] [ 22.210770] CPU: 0 UID: 0 PID: 1 Comm: repro Not tainted 7.2.0-07732-g9328b3b03bdc-dirty #3 PREEMPT(lazy) [ 22.212576] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 22.213750] Call Trace: [ 22.215271] <TASK> [ 22.216242] ? ftrace_stub_direct_tramp+0x10/0x10 [ 22.217774] dump_stack_lvl+0x4e/0x70 [ 22.220531] print_report+0x157/0x4b4 [ 22.223202] ? fixup_red_left+0x9/0x30 [ 22.224407] ? complete_report_info+0x83/0x110 [ 22.226679] ? function_graph_enter_regs+0xa76/0xb90 [ 22.228084] kasan_report+0xce/0x100 [ 22.230109] ? function_graph_enter_regs+0xa76/0xb90 [ 22.232860] ? stack_trace_save+0x4/0xd0 [ 22.234156] function_graph_enter_regs+0xa76/0xb90 [ 22.236090] ? kasan_save_stack+0x30/0x50 [ 22.237752] ? __pfx_function_graph_enter_regs+0x10/0x10 [ 22.238694] ? ring_buffer_lock_reserve+0x345/0xf80 [ 22.239628] ? stack_trace_save+0x4/0xd0 [ 22.242121] ? stack_trace_save+0x4/0xd0 [ 22.243588] ftrace_graph_func+0xda/0x160 [ 22.245362] ? ftrace_stub_direct_tramp+0x10/0x10 [ 22.246520] 0xffffffffa0000095 [ 22.250528] ? stack_trace_save+0x9/0xd0 [ 22.251757] ? ring_buffer_unlock_commit+0x11d/0x5c0 [ 22.253152] stack_trace_save+0x9/0xd0 [ 22.254264] kasan_save_stack+0x30/0x50 [ 22.273631] kasan_save_track+0x14/0x30 [ 22.276763] kasan_save_free_info+0x3b/0x70 [ 22.278296] __kasan_slab_free+0x43/0x70 [ 22.280157] kmem_cache_free+0xbf/0x3b0 [ 22.282963] ? ftrace_stub_direct_tramp+0x10/0x10 [ 22.284001] free_task+0xa2/0x160 [ 22.285699] ? ftrace_stub_direct_tramp+0x10/0x10 [ 22.286752] copy_process+0x2aae/0x7bc0 Initialize the child function graph state immediately after dup_task_struct(), before the first fallible operation. | ||||
| CVE-2026-97936 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix memory corruption from the histogram stacktrace modifier parse_field() sets HIST_FIELD_FL_STACKTRACE from the ".stacktrace" modifier before it looks the field name up, and nothing afterwards checks that the name resolved to a field which holds a stacktrace. create_hist_field() picks HIST_FIELD_FN_STACK on the strength of the field pointer alone, which reads a __data_loc word from the record and follows its low 16 bits as an offset into the same record. event_hist_trigger() takes the first word there as an entry count and copies that many longs into a 31 entry array: n_entries = *stack; memcpy(entries, ++stack, n_entries * sizeof(unsigned long)); Neither end of that copy is bounded, and the count is whatever the event holds at the offset, so any field will do: # cd /sys/kernel/tracing/events/sched/sched_process_fork # echo 'hist:keys=parent_pid.stacktrace' > trigger # (true) BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:rb_insert_color+0x18/0x130 timerqueue_linked_add+0x7e/0xd0 enqueue_hrtimer+0x39/0xb0 __hrtimer_run_queues+0x10f/0x1f0 </IRQ> RIP: 0010:memcpy+0xc/0x30 event_hist_trigger+0x165/0x690 The timer interrupt landed on the rbtree the copy had already run over. No debug options are needed for this; KASAN reports the same write as an out-of-bounds read of 13835058055416381440 bytes. Documentation/trace/histogram.rst already states the rule, "must be a long[] type", so enforce it once the name has been resolved. Names which resolve to no field at all, "hitcount.stacktrace" and the common_* pseudo-fields, are refused for the same reason: they hold no stacktrace to read. | ||||
| CVE-2026-97935 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Set the trace clock before registering the histogram trigger hist_register_trigger() puts the trigger on the global named_triggers list in cmd_ops->init(), and only then sets the trace clock: if (data->cmd_ops->init) { ret = data->cmd_ops->init(data); if (ret < 0) goto out; } if (hist_data->enable_timestamps) { ret = tracing_set_clock(file->tr, hist_data->attrs->clock); if (ret) { hist_err(tr, HIST_ERR_SET_CLOCK_FAIL, errpos(clock)); goto out; } The clock string is not checked anywhere before that call, so a named trigger using common_timestamp with an unknown clock fails after it has already become findable. event_hist_trigger_parse() then frees it without taking it off the list, and the next lookup by name reads the freed object: ~# cd /sys/kernel/tracing/events/sched/sched_switch ~# echo 'hist:name=foo:keys=common_pid:ts=common_timestamp:clock=bogus' > trigger bash: echo: write error: Invalid argument ~# echo 'hist:name=foo:keys=common_pid' > trigger BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0 Read of size 8 at addr ffff88800915d760 by task init/1 find_named_trigger+0xac/0xc0 hist_register_trigger+0xc1/0x900 event_hist_trigger_parse+0x3146/0x6af0 event_trigger_write+0xce/0x160 Freed by task 63: kfree+0x154/0x420 trigger_kthread_fn+0xfd/0x160 Set the clock before the trigger is registered, so that nothing which can fail runs after it is published, the way commit 6f86bdeab633 ("tracing: Fix bad hist from corrupting named_triggers list") moved the registration below the rest of the setup. tracing_set_filter_buffering() is reference counted, so the init failure path has to drop the reference that the clock block now takes first. | ||||
| CVE-2026-97934 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix memory corruption from a "STACKTRACE" histogram key "cpu", "CPU", "stacktrace" and "STACKTRACE" are generic fields, defined with an offset and a size of zero so that the filter code can match them by name. parse_field() maps them onto their common_* equivalents for backward compatibility, but unlike the common_* names it hands the placeholder back to the caller instead of NULL. create_hist_field() takes a non-NULL field as a promise that the record carries a stacktrace and picks HIST_FIELD_FN_STACK, so the __data_loc word is read from offset 0, that is from common_type, and its low 16 bits are followed as an offset into the record. What is found there becomes the length of an unbounded memcpy. Pick an event whose id is small enough that the offset stays inside its own record and the length is a kernel text address: # cd /sys/kernel/tracing # echo 'hist:keys=STACKTRACE' > events/ftrace/print/trigger # echo hello > trace_marker Oops: general protection fault, probably for non-canonical address RIP: 0010:rb_next+0x23/0x60 </IRQ> RIP: 0010:memcpy+0xc/0x30 event_hist_trigger+0x2e7/0x12c0 Kernel panic - not syncing: Fatal exception in interrupt Leave the field NULL, which is what the comment above the branch says the code does and what common_stacktrace already does. FILTER_CPU and FILTER_COMM are left alone, their create_hist_field() branches never look at the field. | ||||
| CVE-2026-97933 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Take trace_array reference when opening a tracer options file When a tracer option file is opened, it is passed a descriptor that points to an element on the trace_array's topts array. This element has information to find the trace array and other information. It uses this element to take a reference of the trace_array so that the trace_array does not get removed while this file is opened. Unfortunately, there's a race condition where the element itself could be freed by the removal of the instance the trace_array represents causing a use-after-free as this element that is used to find the trace_array to increment its reference counter is also freed when the instance is removed. To solve this, add a trace_array_tracer_options_get() helper function that will take the address of the element that is passed to the open function by the inode->i_private pointer and search all the trace_arrays under a lock to find the one that the element's address is in the range of the trace_arrays topts array elements. When a match happens, that trace_array's reference would be increased. Note, there's a race where if an admin was deleting and creating trace instances at the same time and the memory of the old trace_array's array matched the memory of the new trace_array that it could in theory open the option from the wrong trace array. But we do not care because it would be stupid to perform that kind of action. As long as the only thing that can happen is that the option from the wrong trace array is used and doesn't crash the kernel it will only make the user confused. But if they are doing something stupid like this, they are already confused, so no harm done. | ||||
| CVE-2026-97932 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Don't dereference trace_event_file in deferred trigger free The enable_event trigger defers trace_event_put_ref() to the trigger free kthread, but the trace_event_file can already be freed when the instance is removed. Keep the trace_event_call directly in enable_trigger_data so the deferred free does not access the freed trace_event_file. | ||||
| CVE-2026-97931 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: us122l: Prevent write upgrades for read mappings The hwdep mmap callback rejects read-buffer mappings that are initially writable, but leaves VM_MAYWRITE set on mappings created with PROT_READ. A process that can open the hwdep node O_RDWR can later use mprotect() to make the mapping writable. The read allocation begins with struct usb_stream. Its read_size member is used by the fault handler to decide which pages belong to the read buffer. The read VMA intentionally remains expandable because pcm_usb_stream uses mremap() after reading that size. Changing read_size first can therefore map and access pages beyond the allocation. The same member is also consumed by usb_stream_free(), where changing it can make free_pages_exact() release pages outside the allocation. Clear VM_MAYWRITE for read-buffer mappings after rejecting an initially writable VMA. This keeps the separate output-buffer mapping writable while preventing later permission upgrades. | ||||