Export limit exceeded: 397947 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (397947 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97910 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: sprd: validate compress buffer sizes against fixed allocations sprd_platform_compr_open() allocates the stage 0 IRAM buffer (32K data area) and the stage 1 DDR buffer (2M data area) with fixed sizes, but sprd_platform_compr_copy() derives all copy lengths from the user controlled runtime->fragment_size and the write() count, never comparing them against the physical buffer sizes. The compress core only checks fragment_size * fragments for an u32 overflow in snd_compress_check_input(), so a local user can configure a logical buffer of up to ~4GB via SNDRV_COMPRESS_SET_PARAMS, far exceeding the fixed allocations. A fragment_size larger than the 32K IRAM data area makes the stage 0 copy_from_user() overflow past the IRAM allocation, and a buffer_size larger than the 2M DDR buffer makes the wrapping copy at the end of sprd_platform_compr_copy() write fully user controlled data past the buffer. No SNDRV_PCM_TRIGGER_START is needed, a write() in SETUP state reaches the copy callback directly. Reject parameters that do not fit into the fixed buffers in set_params(), and fix the advertised max fragment size: 128K never fitted into the 32K IRAM buffer. The caps values may have been carried over from the qdsp6 driver, which allocates its buffers according to the advertised maxima, unlike this driver. With 32K as max fragment size the advertised limits are self-consistent: 32K * 64 = 2M equals the DDR buffer size. Discovered by Atuin - Automated Vulnerability Discovery Engine. | ||||
| CVE-2026-97909 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: sti: initialize IRQ lock before requesting IRQ uni_reader_init() registers the shared IRQ before initializing reader->irq_lock. A pending interrupt can invoke the handler while the lock is still uninitialized. Initialize the lock before registering the IRQ so the interrupt path always sees valid lock state. | ||||
| CVE-2026-97908 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btqcomsmd: destroy RPMsg endpoints before freeing hci_dev The command and ACL RPMsg endpoints store struct btqcomsmd as their callback private data. The receive callbacks dereference btq->hdev without taking an hci_dev reference. The current teardown order frees the hci_dev before destroying the RPMsg endpoints in both the hci_register_dev() error path and the driver remove path. If WCNSS delivers data in that window, the endpoint callback can run with an already freed hci_dev and pass it to the Bluetooth core. For qcom_smd endpoints, rpmsg_destroy_ept() closes the channel and clears the callback under the channel recv_lock. The receive path holds the same lock while invoking the callback, so destroying the endpoints first both prevents new callbacks and serializes with any callback already running. Destroy the command and ACL endpoints before hci_free_dev(). Keep hci_unregister_dev() first during remove so the HCI core stops issuing operations before the transport endpoints are shut down. In the full registration-error cleanup path, return directly after freeing the hci_dev to avoid falling through to the partial-construction labels and destroying the endpoints twice. | ||||
| CVE-2026-97907 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btrtl: Don't leak return code when parsing firmware format v2 When key_id from chip is zero, rtlbt_parse_firmware_v2() intentionally ignores all security headers. However, the implementation simply breaks from a switch statement and leaks uninitialized return code `rc' (if the first section is a security one) or the previous section's `rc'. Fix it by really skipping a loop with `continue'. For consistency and readability, also do the same for the default case. | ||||
| CVE-2026-97906 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bootconfig: Fix integer overflow in initrd size check Sashiko reported that in get_boot_config_from_initrd(), a crafted initrd with a huge bootconfig size (such as 0xFFFFFFFF) can cause the pointer arithmetic: data = ((void *)hdr) - size; to wrap around on 32-bit systems (or when pointer subtraction overflows). Because data wraps around, the subsequent bounds check: if ((unsigned long)data < initrd_start) evaluates to false, bypassing the check. The kernel then calls xbc_calc_checksum(data, size), which attempts to read 4GB of memory, hitting unmapped pages and triggering a fatal kernel page fault during early boot. Furthermore, on 64-bit systems with an initrd > 4.29 GB, an unbounded 32-bit size can similarly bypass the initrd_start check. Fix this by: 1. Ensuring the initrd is at least large enough to contain the bootconfig footer and verifying hdr is within the initrd bounds. 2. Checking that size does not exceed XBC_DATA_MAX and does not exceed the available space between initrd_start and hdr before performing pointer subtraction. | ||||
| CVE-2026-97905 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: zero-initialize policy cpumask before sysfs publication cpufreq_policy_alloc() allocates policy->cpus with alloc_cpumask_var(), i.e. without __GFP_ZERO, unlike the sibling related_cpus and real_cpus masks. With CONFIG_CPUMASK_OFFSTACK=y the mask is a separate kmalloc_node() allocation, so its bitmap holds whatever the slab allocator left behind: cpufreq_online() cpufreq_policy_alloc() alloc_cpumask_var(&policy->cpus) /* bitmap is uninitialized */ kobject_init_and_add() /* policy%u/ appears in sysfs */ cpufreq_policy_online() cpumask_copy(policy->cpus, cpumask_of(cpu)) /* first valid value */ This leaves a window in which the sysfs attributes are already reachable while policy->cpus is still garbage. show()/store() gate on policy_is_inactive(), i.e. cpumask_empty(policy->cpus), so a non-zero bitmap makes them run the attribute callbacks on a policy that is not initialized yet. Fix this by using zalloc_cpumask_var() for policy->cpus. | ||||
| CVE-2026-97904 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: initialize policy rwsem before sysfs publication cpufreq_policy_alloc() initializes policy->rwsem after kobject_init_and_add() has created the policy sysfs directory and its default attributes. A sysfs access can therefore reach a policy callback before the semaphore has been initialized. Initialize policy->rwsem before publishing the policy kobject so sysfs callbacks always see an initialized semaphore. | ||||
| CVE-2026-97903 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: exit: hold a reference to thread_pid across proc_flush_pid Commit 0a36bad01731 ("release_task: kill the no longer needed get/put_pid(thread_pid)") removed the reference around proc_flush_pid(). It assumed that free_pids(post.pids) at the end of release_task() would keep thread_pid alive until then. That assumption is wrong. __change_pid() only records a detached PID in post.pids when pid_has_task() is false for every PIDTYPE. If another task still uses the exiting task's PID as its process group or session ID, __unhash_process() removes the exiting task's PIDTYPE_PID link but leaves the PID out of post.pids. release_task() therefore holds no reference to it after dropping tasklist_lock. The other task can then remove the remaining PIDTYPE links. Its free_pids() call schedules delayed_put_pid(), and the RCU callback can free the PID before the first release_task() reaches proc_flush_pid(). An unprivileged reproducer races wait4(-1) against setsid() to trigger this ordering. Three of three fresh v7.2 KASAN boots reported: BUG: KASAN: slab-use-after-free in proc_invalidate_siblings_dcache+0x3e2/0x3f0 Read of size 8 by task h7_pid_reaper/1921 Call Trace: proc_invalidate_siblings_dcache release_task wait_consider_task __do_wait do_wait kernel_wait4 Freed by task 0: kmem_cache_free put_pid delayed_put_pid rcu_core Last potentially related work creation: __call_rcu_common free_pids ksys_setsid KASAN identified a 144-byte object from the pid cache and located the bad read 80 bytes into the freed object, matching pid->inodes. With an explicit reference, three of three fresh boots completed without a KASAN report. The concurrent RCU callback dropped its reference while proc_flush_pid() was protected, and the balancing put_pid() performed the final free afterward. Take a reference before __unhash_process() clears p->thread_pid and release it after proc_flush_pid() completes. A tested source reproducer is available privately on request. No controlled read or write, information leak, or privilege escalation is claimed. The mainline patch applies directly to v6.19.y and newer; v6.16.y through v6.18.y need a context-adjusted backport. | ||||
| CVE-2026-97902 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs: don't return -EINVAL for successful nested thaw Commit 7366f8b6fc6a ("fs: handle freezing from multiple devices") replaced the freeze_holders bitmask with per-holder counters to allow nested freezes. In the bitmask version, a thaw that released a shared hold while another holder remained returned 0. Since the rework, thaw_super_locked() drops the freeze reference via freeze_dec() but then returns -EINVAL when other freezers remain, misinforming the caller: the thaw did succeed, the superblock just stays frozen for the remaining holders. This breaks bdev-initiated freezing. When a filesystem is frozen with FIFREEZE and additionally frozen via bdev_freeze() -- which nests by design, see fs_bdev_freeze() -- the subsequent bdev_thaw() receives -EINVAL from the holder op although its freeze reference was dropped, and therefore keeps bd_fsfreeze_count elevated. Then device-mapper's unlock_fs() ignores bdev_thaw()'s return value, so nothing rebalances the count. After the user's FITHAW and umount, the block device can never be mounted again: dm-1: Can't mount, blockdev is frozen There is no way for userspace to drop the leaked count; only destroying the block device (or a reboot) recovers the device. Reproducer (any kernel since v6.8): dmsetup create dut --table "0 $(blockdev --getsz "$DEV") linear $DEV 0" mkfs.ext4 /dev/mapper/dut mount /dev/mapper/dut /mnt fsfreeze --freeze /mnt # freeze_ucount == 1 dmsetup suspend dut # bd_fsfreeze_count == 1, ucount == 2 dmsetup resume dut # ucount 2 -> 1, but thaw_super() # returns -EINVAL, so bdev_thaw() # keeps bd_fsfreeze_count at 1 fsfreeze --unfreeze /mnt # filesystem thaws fine umount /mnt mount /dev/mapper/dut /mnt # EBUSY, forever The same happens with fsfreeze held across an LVM snapshot of the origin volume. fs_bdev_thaw()'s documentation already describes the intended semantics: "If this function returns zero it doesn't mean that the filesystem is unfrozen as it may have been frozen multiple times". Restore them by returning 0 when a nested thaw drops its hold while other freezers remain. Thawing without holding a freeze still fails with -EINVAL as may_unfreeze() rejects that case before the reference count is touched. | ||||
| CVE-2026-97901 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: genetlink: pin family module during policy dump The generic netlink controller's policy dump keeps pointers to the target family's operation and policy tables in its callback state. A dump may be split across multiple skbs and remain pending after the initial request. Netlink pins the module which owns the dump callback, but in this case that is the controller's owner rather than the target family's owner. The target family can consequently be unregistered and its module unloaded while a policy dump is pending. Advancing the dump then dereferences policy memory from the unloaded module. Take a reference to the target family's module when the dump starts. Drop it from the error and done paths. This matches the lifetime for which the dump context retains the family and policy pointers. | ||||
| CVE-2026-97900 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/drm_exec: fix up contended obj when num_objects is 0 drm_exec_prepare_array() silently returns success without calling drm_exec_lock_contended() when num_objects is zero. This breaks the invariant upheld by drm_exec_lock_obj(), where every entry point into the locking sequence must first attempt to lock any previously contended object before proceeding. Drivers that chain multiple drm_exec_prepare_array() calls per drm_exec_until_all_locked() iteration (e.g. amdgpu's userq signal/wait ioctls, which prepare separate read and write BO arrays) can pass an empty array for one of the two calls. If contention is hit while preparing the non-empty array, exec->contended is set and the loop retries; on retry, the empty-array call preceding it is a no-op that never clears exec->contended, so drm_exec_retry_on_contention() immediately jumps back to the top of the loop without ever reaching the call that would resolve the contention. This spins forever. Fix it by having drm_exec_prepare_array() call drm_exec_lock_contended() directly when num_objects is zero, so a pending contended object dont loop infinitely. | ||||
| CVE-2026-97621 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: analogix_dp: fix unchecked bound endpoint name length rockchip_dp_drm_encoder_enable() uses sprintf() to format a device tree path into a 32-byte stack buffer. Device tree paths are not limited to this size, so a sufficiently long path can overflow the buffer. Use snprintf() with the destination size to truncate the generated name and keep the writes within bounds. | ||||
| CVE-2026-97619 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/rw: end write accounting from ->ki_complete Commit b000145e9907 moved both the fsnotify calls and the write accounting out of the kiocb completion handler and into the io_req_rw_complete() task_work. However, only the fsnotify part actually needed to move as it may sleep. Ending the write accounting is just a percpu_up_read() on the superblock writers sem. Deferring it is a problem, because it makes dropping SB_FREEZE_WRITE protection depend on the ring owner getting to running task_work. But the task may be blocked in freeze_super(), causing it to never get to that: task io-wq worker -------------------------------------------------------------- io_write() io_kiocb_start_write() (takes sb_writers, hidden from lockdep by __sb_writers_release) write_iter() -> -EIOCBQUEUED ioctl(FS_IOC_SHUTDOWN) bdev_freeze() freeze_super() percpu_down_write() <- waits for the reader above io_write() kiocb_start_write() percpu_down_read() <- queued behind the writer <bio completes> io_complete_rw() queues io_req_rw_complete() <- never runs, task is in D state End the write from io_complete_rw() instead, and leave only the fsnotify calls in task_work. | ||||
| CVE-2026-97617 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Check resize_disabled before publishing the new subbuf order ring_buffer_subbuf_order_set() stores the new order and only then walks the CPUs, returning -EBUSY if any of them has resizing disabled. A user mapped buffer has resizing disabled, and __rb_map_vma() reads buffer->subbuf_order without buffer->mutex, so an mmap of an already mapped CPU racing the failing order change sizes the mapping with the new order and inserts pages past the sub-buffer into the VMA. Check the CPUs before storing the new order. | ||||
| CVE-2026-97615 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: use option bits for CFM/MRP frame handlers CFM and MRP register a global br_frame_type whose hlist_node is linked into the per-bridge frame_type_list when the first MEP/MRP instance is created. Enabling the protocol on multiple bridges therefore inserts the same node into multiple lists. Unregistering it on one bridge then corrupts list state belonging to another. These handlers can only be installed once per bridge, and they are uncommon. Track their per-bridge enable state with net_bridge option bits, which already live on the Rx hot cache line, and dispatch the matching handler directly from the receive path. Check both bits together first as an unlikely case. Remove the generic frame_type_list and br_frame_type helpers, which have had no other users since CFM and MRP were added. That shrinks struct net_bridge by 8 bytes and drops the list walk from the fast path. When neither protocol is compiled in, BR_CFM_MRP_OPTS is 0 and the compiler prunes the branch. | ||||
| CVE-2026-97613 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: mana: Reserve extra CQ slot for the fence completion CQE The RX completion queue is sized to hold exactly one CQE per posted RX WQE. MANA_FENCE_RQ makes hardware post an additional CQE_RX_OBJECT_FENCE after the packet CQEs. The current sizing reserves no extra slot for it and in rare cases, CQ has no guaranteed slot for the fence CQE when it is full of packet CQEs. This can lead to dropping the fence completion while the driver waits holding RTNL lock throughout the timeout duration. Reserve one extra CQE slot for CQE_RX_OBJECT_FENCE. mana_gd_alloc_memory() requires queue_size to be a power-of-two and at least MANA_PAGE_SIZE; the reservation pushes cq_size past a power-of-two, so round up the CQ size in mana_create_rxq(). | ||||
| CVE-2026-97612 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: mpls: clear inner_protocol when the last label is popped skb_mpls_push() records the pre-encapsulation network header once, gated on !skb->inner_protocol. skb_mpls_pop() never clears that record, so it outlives the encapsulation it describes. Open vSwitch can then re-push MPLS onto a packet whose inner_network_header still points at the older, deeper offset: push a label, pop every label, recirculate (ovs_flow_key_update() re-derives key->eth.type and resets network_header, but leaves inner_*), then push again. ovs_fragment() trusts the record: skb->network_header = skb->inner_network_header; so skb_network_offset() goes negative. The bound check is signed: if (skb_network_offset(skb) > MAX_L2_LEN) a negative offset passes it, and prepare_frag() widens the value: unsigned int hlen = skb_network_offset(skb); memcpy(&data->l2_data, skb->data, hlen); which is a ~4GiB memcpy out of a 30-byte per-CPU buffer. Reproduced on v7.3-rc1. RDX is the truncated length, (unsigned int)(-8): BUG: unable to handle page fault for address: ffffe8ffffc16000 #PF: supervisor write access in kernel mode Oops: 0002 [#1] SMP KASAN NOPTI RIP: 0010:memcpy+0x8/0x20 RDX: 00000000fffffff8 RSI: ffff888105d732db RDI: ffffe8ffffc16000 prepare_frag+0x3df/0x4e0 ovs_fragment+0x589/0x7e0 do_output+0x4ce/0x5e0 do_execute_actions+0x55d2/0x7b30 ovs_execute_actions+0xea/0x450 Same root-cause shape as commit 975b5b067f52 ("ipv6: sr: restore network header before routing and forwarding"): a stale network header offset reaching a consumer that widens it. Here it originates in the MPLS push/pop path. Clear inner_protocol once the packet is no longer MPLS, so a later push re-records the current header. net/sched/act_mpls.c is the only other skb_mpls_pop() caller and gets the same fix; sch_frag.c saves and restores inner_protocol around fragmentation in the same way OVS does. | ||||
| CVE-2026-97609 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: cttimeout: prevent UAF during module unload nf_ct_set_timeout() protects the timeout hook dereference and policy lookup with rcu_read_lock(). cttimeout_exit(), however, unregisters the per-net operations before it clears the hook. This allows the following interleaving: CPU 0 CPU 1 cttimeout_exit() nf_ct_set_timeout() unregister_pernet_subsys() rcu_read_lock() kfree(pernet) h = nf_ct_timeout_hook h->timeout_find_get() nfct_timeout_pernet() The hook still points to ctnl_timeout_find_get() when CPU 1 looks up the already freed per-net timeout list. KASAN reported: BUG: KASAN: slab-use-after-free in ctnl_timeout_find_get Read of size 8 by task poc/90 Call Trace: ctnl_timeout_find_get+0x271/0x2a0 [nfnetlink_cttimeout] nf_ct_set_timeout+0x7b/0x3c0 xt_ct_tg_check+0x724/0xb20 xt_check_target+0x234/0xa90 do_ipt_set_ctl+0x570/0x1270 Allocated by task 89: __kmalloc_noprof+0x16e/0x460 ops_init+0x6d/0x420 register_pernet_operations+0x2f6/0x670 Freed by task 91: kfree+0x131/0x390 ops_undo_list+0x3d4/0x730 unregister_pernet_operations+0x232/0x490 unregister_pernet_subsys+0x1c/0x30 cttimeout_exit+0x52/0x970 [nfnetlink_cttimeout] Clear the hook and wait for existing readers before unregistering the per-net operations. This blocks new policy lookups and ensures readers that observed the hook finish before the per-net storage is freed. | ||||
| CVE-2026-97608 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_log: unregister loggers before per-net teardown nf_log_syslog and nfnetlink_log unregister their per-network namespace operations before unregistering their global logger backends. This leaves a window where a sysctl or netlink writer can rebind the still- registered logger after the per-net pre-exit callback cleared the old selection. The race looks like this: CPU 0 CPU 1 ---- ---- unregister_pernet_subsys() nf_log_unset(net, logger) net->nf.nf_loggers[pf] = NULL lock nf_log_mutex find logger in loggers[][] net->nf.nf_loggers[pf] = logger unlock nf_log_mutex nf_log_unregister(logger) lock nf_log_mutex loggers[pf][type] = NULL unlock nf_log_mutex synchronize_rcu() module exit returns module core frees backend memory Later, a sysctl read or packet logging operation can dereference the stale per-net logger pointer. Fix this by unregistering the global logger backends before tearing down per-net state. Once the global registrations are gone, later writers can no longer rebind the logger. unregister_pernet_subsys() already waits for an RCU grace period after the pre-exit callback clears the per-net selection, while nf_log_unregister() continues to cover readers of the global logger table. Apply this ordering fix to both nf_log backends that combine per-net teardown with global logger registration. | ||||
| CVE-2026-97607 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vdpa: ifcvf: Put device on unsupported feature error Route unsupported provisioned features through the common error path after vdpa_alloc_device() so the allocated device and adapter pointer are released consistently. | ||||