Export limit exceeded: 396868 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 50877 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (50877 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90090 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtksdio: Fix out-of-bounds DMA read in the TX path btmtksdio_tx_packet() rounds the transfer size up to the SDIO block size of 256 bytes, but hands the host controller the SKB buffer as is: err = sdio_writesb(bdev->func, MTK_REG_CTDR, skb->data, round_up(skb->len, MTK_SDIO_BLOCK_SIZE)); Only skb->len bytes hold packet data, so the controller reads up to 255 bytes of uninitialised memory and sends it to the device over the SDIO bus. Depending on how much tailroom slack the SKB allocation happens to carry, that read can also extend past the end of the buffer. Compute the padded length up front, ensure the SKB has tailroom for it, and zero-fill the padding with skb_put_zero(). skb->len then covers the padding, so sdio_writesb() no longer needs to round up. byte_tx keeps counting the header and the payload only, and the error path restores the SKB so that the caller can requeue it. Writing behind skb->tail is only safe because the driver owns the buffer, which "Bluetooth: btmtksdio: Take exclusive ownership of the SKB before TX" ensures. | ||||
| CVE-2026-93165 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/chrome: sensorhub: Fix memory overread in ring handler `max_response` and `sensor_num` are read from different EC commands: - `max_response` is from cros_ec_get_proto_info(). ec_dev->max_response = info->max_response_packet_size - sizeof(struct ec_host_response); - `sensor_num` is from cros_ec_get_sensor_count(). sensor_num = cros_ec_get_sensor_count(ec); With a malfunctioning EC firmware, it is possible that the `msg->insize` (i.e., `fifo_info_length` in the context) could be clamped in cros_ec_cmd_xfer() because `msg->insize` is greater than `max_response`. int fifo_info_length = sizeof(struct ec_response_motion_sense_fifo_info) + sizeof(u16) * sensorhub->sensor_num; This means the number of read bytes could be less than expected. As a result, the subsequent memcpy() in cros_ec_sensorhub_ring_handler() overreads the `resp->fifo_info` buffer. Check the return value of cros_ec_cmd_xfer_status() and abort if the number of bytes read does not match the expected length. | ||||
| CVE-2026-90103 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4.2: fix LAYOUTSTATS send buffer exhaustion encode_layoutstats_maxsz budgets XDR_QUADLEN(PNFS_LAYOUTSTATS_MAXSIZE), i.e. 256 bytes, for the layoutupdate4 body written by the layout driver. The flexfiles record can exceed that. ff_layout_encode_ff_layoutupdate() emits, per data server, a netaddr4, an nfs_fh4, two ff_io_latency4, an nfstime4 and a bool. A data server whose filehandle is NFS_MAXFHSIZE bytes long already accounts for 132 of those bytes, and the two ff_io_latency4 at 64 bytes each, the nfstime4 and the bool add a further 144, so the body passes 256 bytes before the netaddr4 is encoded at all. encode_layoutstats() additionally writes the deviceid4 and the layoutupdate4 lou_type word, neither of which the macro accounts for. The filehandle and the address are both chosen by the server, through LAYOUTGET and GETDEVICEINFO, so it can drive the encoder past the end of the send buffer. xdr_reserve_space() returns NULL once that happens, and the two ff_layout_encode_io_latency() calls run with dss_info->mirror->lock held, so a NULL return there leaves the lock permanently held. Raise PNFS_LAYOUTSTATS_MAXSIZE to 384 so that the record fits inside the reservation. | ||||
| CVE-2026-90114 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: Reject descending VLAN tunnel ranges A pair of descending VLAN and tunnel IDs can pass the tunnel range span check. The VLAN subtraction produces a negative int, which is converted to unsigned when compared with the u32 tunnel ID subtraction. It can therefore equal the wrapped tunnel ID delta. The range loop then performs no iterations. Since the batched notification handling added a post-loop error check, this leaves err uninitialized and makes the request's return value unpredictable. Reject descending VLAN ranges before comparing the spans. Valid ascending and single-entry ranges remain unchanged, while malformed descending ranges consistently return -EINVAL. This issue was found by a static analysis checker and confirmed by manual source review. | ||||
| CVE-2026-90223 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: bound SNL TLV parsing to the skb and add length checks nfc_llcp_recv_snl() walked the SNL TLV list using a u16 offset/length pair derived from skb->len, without bounding reads to the actual skb data. Three problems followed: - For a short frame (skb->len < LLCP_HEADER_SIZE), tlv_len underflowed. - The per-TLV header (type, length) was read without checking that two bytes remained. - A declared TLV length could run past the end of the buffer, and an SDREQ with length == 0 made "service_name_len = length - 1" underflow (size_t), driving an out-of-bounds read in the following strncmp() / nfc_llcp_sock_from_sn(). The SDRES case likewise read tlv[2]/tlv[3] without a length check. A nearby NFC device can reach this without authentication; LLCP link activation happens automatically after NFC-DEP. Walk the TLV list by pointer, bounded by skb_tail_pointer() over the linear skb data, and validate each TLV declared length before use. Add explicit length checks for SDREQ (>= 1) and SDRES (exactly 2). Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-61722 | 1 Fluidsynth | 1 Fluidsynth | 2026-09-20 | 6.8 Medium |
| FluidSynth is a software synthesizer based on the SoundFont 2 specifications. From 2.5.0 until 2.5.6, the native DLS parser validates articulation chunks using the unsigned expression cbsize + connblocks * 12 without first ensuring that the multiplication and addition fit in 32 bits. A crafted DLS file can supply a large connblocks value that wraps the expression and bypasses the chunk-size check, after which the parser performs approximately one billion 12-byte iterations beyond the chunk boundary. The excessive processing and invalid reads can cause denial of service. Builds with the CMake option enable-native-dls set to OFF do not expose the parser. This issue is fixed in version 2.5.6. | ||||
| CVE-2026-90133 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: Fix index_root heap OOB write in ntfs_ir_to_ib() ntfs_ir_to_ib copies all entries from index_root into a freshly allocated index_block_size-byte buffer without verifying that the entries fit in the available space. The entries in index_root may be larger than the usable entry space in the index block. This can cause OOB writes past the end of the allocation. The validator ntfs_index_root_inconsistent() checks that entries are self-consistent within the IR value, but never cross-checks them against index_block_size. There is no bounds check in ntfs_ir_to_ib() before the memcpy. Fixing this at the sink in ntfs_ir_to_ib() since ntfs_index_root_inconsistent() validates the logical consistency of index_root as a structure and a root with large entries is a structurally valid root. The bug is a size conflict of ntfs_ir_to_ib(). Also, the validator is called once per inode load in ntfs_read_locked_inode() while ntfs_ir_to_ib() is only called during a reparent, a check there adds no overhead to the common path. Moreover, even a future call path that bypasses the validator would still be protected. With NULL as first parameter of ntfs_error(), the volume error flag is never set by this call, so the device name will be absent from the error message. In any case, that the caller, ntfs_ir_reparent(), prints an error message that includes the device name on NULL returns. I think this is the best solution available without adding 'struct super_block *sb' as a parameter to ntfs_ir_to_ib(). This heap out-of-bounds write is triggered by a crafted filesystem image, which is not in the kernel threat model, anyway, fixing memory errors would be nice to keep things secure. | ||||
| CVE-2026-90141 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: fix integer overflow in ftp helper port/address parsing ip_vs_ftp_get_addrport() accumulates decimal digits into a __u16 (hport) and into unsigned char (p[]) without checking for overflow. A crafted FTP PASV/EPSV response with an over-long port or address octet wraps the value, so the helper configures the data connection with a truncated port/address. The netfilter conntrack FTP helper had the same defect, fixed in commit 2b413fc689ba ("netfilter: nf_conntrack_ftp: avoid u16 overflows"). Apply the equivalent fix here: widen the port accumulator to u32 and reject values above 65535, and reject address octets above 255. | ||||
| CVE-2026-90191 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: riscv-sbi-mpxy: validate RPMI notification lengths The SBI return value controls how many bytes are copied from shared memory into the RPMI notification buffer. It is not validated against the negotiated shared-memory size before that copy. The event walker also uses a reversed loop condition and can inspect a short event record. Validate the complete notification length before copying it, iterate only while a full event header remains, and stop when a declared event payload extends beyond the copied notification data. | ||||
| CVE-2026-90274 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: coresight: etm4x: fix underflow for usage of (nrseqstate - 1) According to IHI006H Embedded Trace Macrocell Architecture Specification[0], TRCSEQEVR<n> is implemented only when TRCIDR5.NUMSEQSTATE is 0b100, in which case n ranges from 0 to 2; otherwise, TRCIDR5.NUMSEQSTATE is 0b000. IOW, the number of usage in the initialisation or setting TRCSEQEVR<n> with drvdata->nrseqstate - 1 in the loop could make underflow issue when TRCIDR5.NUMSEQSTATE is 0b000. Therefore, introduce nr_seq_ctrls field and untie it from nrseqstate. As part of this introduce ETM_MAX_SEQ_TRANSITIONS macro and apply nr_seq_ctrls and above macro to TRCSEQEVR<n> relevant fields setup. | ||||
| CVE-2026-90153 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: bound smb_check_perm_dacl() ACE walks by DACL size smb_check_perm_dacl() validates that the DACL fits inside the NT security descriptor, but then bounds its two ACE walks by the remaining NTSD length (acl_size) rather than the DACL's declared size (pdacl_size). When pdacl->size is smaller than the trailing NTSD buffer, bytes after the declared DACL boundary - still inside the stored security descriptor - are parsed as ACEs during access checks. A crafted DACL can place an access-granting ACE beyond pdacl->size, and the current code accepts it during SMB2_CREATE access validation, while parse_dacl() and smb_inherit_dacl() stop at pdacl_size. Bound both ACE walks by pdacl_size to match the DACL boundary semantics used elsewhere in the server. Validation: - semantic KUnit harness shows the post-boundary ACE is selected before the fix and rejected (EACCES) after it - linux master (7.2-rc6), x86_64 | ||||
| CVE-2026-90157 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject negative optlen in cgroup getsockopt hook A cgroup getsockopt BPF program can shrink ctx->optlen after the kernel getsockopt handler has run. The kernel-buffer variant, used by TCP_ZEROCOPY_RECEIVE, only rejects values larger than the original length. If BPF writes a negative optlen, that value is accepted and propagated back to the TCP getsockopt code. It can then be passed to copy_to_sockptr() as a size_t and trigger the hardened usercopy bytes > INT_MAX warning. Reject negative ctx.optlen in __cgroup_bpf_run_filter_getsockopt_kern(), matching the lower-bound validation already present in the sockptr-based getsockopt hook. | ||||
| CVE-2026-90435 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix integer overflow of user QP buffer size set_user_buf_size() computes the QP buffer size by left-shifting the user-supplied rq.wqe_cnt and rq.wqe_shift values as signed integers. A sufficiently large rq.wqe_cnt causes signed integer overflow, which is undefined behavior, and yields a small or negative buf_size, causing ib_umem_get() to map a buffer smaller than the hardware will actually write into. Replace the shifts and addition with check_shl_overflow() and check_add_overflow(), rejecting invalid user inputs. Moreover, guard the identical shift computing qp->sq.offset in _create_user_qp() before set_user_buf_size() is reached. | ||||
| CVE-2026-61721 | 1 Fluidsynth | 1 Fluidsynth | 2026-09-20 | 8 High |
| FluidSynth is a software synthesizer based on the SoundFont 2 specifications. From 2.5.0 until 2.5.6, the native DLS loader assigns file-controlled wsmp.loop_start and wsmp.loop_length values to samples without calling fluid_sample_validate() or fluid_sample_sanitize_loop(). A crafted DLS file can place sample loop points beyond the sample buffer, causing out-of-bounds reads during audio rendering, undefined behavior, possible memory disclosure, and denial of service. Builds compiled with the CMake option enable-native-dls set to OFF do not expose the affected parser. This issue is fixed in version 2.5.6. | ||||
| CVE-2026-90196 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: validate topology volume range before allocation SOF treats the topology mixer min and max values as non-negative indices into its volume table. It stores them in signed fields, allocates max + 1 entries through an int argument, and later indexes the table with the stored range. An inverted range is invalid, while a maximum at or above INT_MAX cannot be represented safely after the increment or in the signed fields. Validate the complete range before storing it or allocating the table. | ||||
| CVE-2026-90199 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: reject out-of-range evcn in mi_enum_attr() In mi_enum_attr(), the start/end VCN validation for non-resident attributes is: if (svcn > evcn + 1) goto out; When evcn is U64_MAX the "evcn + 1" expression wraps to 0 and any svcn passes the check. For evcn values close to U64_MAX (but not equal to it) the right-hand side is still a meaningless near-wrap upper bound, so a malformed on-disk attribute with svcn == 0 and evcn near U64_MAX can pass mi_enum_attr() unrejected. VCN (virtual cluster number) is a cluster index, so any valid evcn is bounded by the volume's total cluster count, which ntfs3 holds in sbi->used.bitmap.nbits (set up in ntfs_init_from_boot() before any caller of mi_enum_attr() runs). Reject evcn values that fall outside this range. However, an empty non-resident attribute (no allocated clusters) is legitimately encoded with svcn == 0 and evcn == -1 (U64_MAX), e.g. via attr->nres.evcn = cpu_to_le64((u64)vcn - 1) with vcn == 0. That sentinel must keep passing, so exclude evcn == U64_MAX from the range check. The existing "svcn > evcn + 1" test still tolerates the sentinel ("0 > 0" is false) and continues to require svcn == 0 for it, while the range check rejects every other out-of-range evcn and thereby also defuses the "evcn + 1" wraparound. svcn does not need its own bound: once evcn < nbits, "svcn > evcn + 1" implies svcn <= nbits. [almaz.alexandrovich@paragon-software.com: fixed evcn check] | ||||
| CVE-2026-90398 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix stride mismatch in mac_phy_caps_parse() Currently, in ath11k_wmi_tlv_mac_phy_caps_parse(), kcalloc() sizes the mac_phy_caps buffer as tot_phy_id * len, where len is clamped to min(firmware_len, sizeof(struct wmi_mac_phy_capabilities)). The subsequent memcpy() destination advances by sizeof(full struct) per slot via C pointer arithmetic, not by the clamped len. When firmware sends short TLVs, the second and later slots are written past the end of the allocation. The reader in ath11k_pull_mac_phy_cap_svc_ready_ext() also indexes the buffer with full-struct pointer arithmetic, so the allocation must match that stride. Fix by using kzalloc_objs(), which derives the element size from the pointer type, making allocation size and pointer stride provably consistent regardless of what len the firmware provides. Compile tested only. | ||||
| CVE-2026-90425 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Require exactly one Stream ID for a vSID tegra241_vintf_init_vsid() maps a guest vSID to a single physical Stream ID taken from master->streams[0], and only warns when the device does not have exactly one stream. A device with several streams gets only its first one mapped, so a guest vSID invalidation cannot reach the others' ATC and IOTLB entries; a device with none makes master->streams a ZERO_SIZE_PTR, read out of bounds. Reject the mapping with -EOPNOTSUPP if master->num_streams is not one. | ||||
| CVE-2026-90203 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Squashfs: check block offset is not negative If a negative offset is read off disk (for example the offset into the decompressed fragment block), this will cause squashfs_copy_data() to perform an out of bounds access. Fix by checking if offset is negative, and returning 0. This matches existing behaviour where an offset beyond the block returns 0 bytes copied. To trigger this out of bounds access requires a crafted Squashfs filesystem and CAP_SYS_ADMIN to mount it. Unprivileged users will not be able to mount such a filesystem, but once mounted, an unprivileged user can trigger the out of bounds access by reading the crafted file with the negative offset. | ||||
| CVE-2026-90414 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: IB/isert: reject PDUs declaring more data than was received isert_recv_done() hands each received PDU to the opcode handlers without ever looking at wc->byte_len, the number of bytes the HCA actually placed in the receive descriptor. The handlers then copy that many bytes - the data-segment length the initiator declared in the BHS (ntoh24(hdr->dlength), via the derived unsol_data_len / imm_data_len) - out of the fixed-size descriptor: isert_handle_iscsi_dataout(): sg_copy_from_buffer(sg_start, sg_nents, isert_get_data(rx_desc), unsol_data_len); isert_handle_scsi_cmd(): sg_copy_from_buffer(cmd->se_cmd.t_data_sg, sg_nents, isert_get_data(rx_desc), imm_data_len); Because the declared length is never checked against wc->byte_len, an initiator can declare a data segment larger than the bytes it actually sent (and larger than the descriptor) and cause an out-of-bounds read of the receive buffer. Nothing upstream of isert closes this door: - __iscsit_check_dataout_hdr() bounds the inbound payload against conn_ops->MaxXmitDataSegmentLength (MXDSL) - a transmit parameter, used here for the inbound check. - iscsi_set_connection_parameters() sets ops->MaxXmitDataSegmentLength = ops->TargetRecvDataSegmentLength; and TARGETRECVDATASEGMENTLENGTH is absent from the min()-clamp list in iscsi_check_acceptor_state(), so the value the initiator declares is adopted verbatim (type range 512..16777215). The initiator effectively raises its own ceiling. - isert never clamps the negotiated value to its own fixed receive descriptor (ISER_RX_SIZE, 9216 bytes), so the target core's bound and the descriptor size are unrelated. The imm_data_len == data_len path is more than an over-read: it aliases the receive descriptor via sg_set_buf() and passes it to the backend as the data source for the SCSI WRITE, so an over-declared length causes heap contents past the descriptor to be written through the backend to the backing store. The backend is the victim of the oversized scatterlist isert hands it, not the cause; no read-back of the written bytes was demonstrated. Trigger: after login completes (full feature phase), an initiator that has declared a large TargetRecvDataSegmentLength and a FirstBurstLength that permits unsolicited/immediate data sends a PDU whose declared data-segment length exceeds what was received. With KASAN: BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0x150/0x1c0 Read of size 4096 at addr ffff888109720800 by task kworker/1:0H/25 Workqueue: ib-comp-wq ib_cq_poll_work Call Trace: sg_copy_buffer+0x150/0x1c0 isert_recv_done+0xba6/0x2390 __ib_process_cq+0xe1/0x390 ib_cq_poll_work+0x46/0x150 isert_recv_done+0xba6 resolves to isert_handle_iscsi_dataout() (ib_isert.c:1160), inlined through isert_rx_opcode(). Validate wc->byte_len against the framing in isert_recv_done() before the PDU reaches any handler, and reinstate the connection if it is short. Because the test compares without subtracting the header length, it also rejects PDUs shorter than the iSER and iSCSI headers, which would otherwise be parsed out of stale descriptor contents. The login handler rejects PDUs shorter than ISER_HEADERS_LEN (commit 29e7b925ae6d ("IB/isert: Reject login PDUs shorter than ISER_HEADERS_LEN")) but does not bound the declared length either; that is fixed in the next patch. The data handlers had no length check at all. isert reads the data segment from a fixed offset: isert_get_data() returns the iSER header plus ISER_HEADERS_LEN and makes no adjustment for an AHS. The bytes the handlers touch are therefore exactly [ISER_HEADERS_LEN, ISER_HEADERS_LEN + dlength), and comparing that sum against wc->byte_len bounds precisely the region that is read. An AHS term would only make the test stricter without bounding anything furth ---truncated--- | ||||