Export limit exceeded: 413892 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (413892 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99016 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: riscv: futex: untag the user pointer before the atomic access access_ok() checks untagged_addr(uaddr), but arch_futex_atomic_op_inuser() and futex_atomic_cmpxchg_inatomic() hand the raw uaddr to the inline asm amoswap/amoadd/.../lr.w+sc.w through the "+m" (*uaddr) operand. When the tagged address ABI is enabled (CONFIG_RISCV_ISA_SUPM, prctl PR_SET_TAGGED_ADDR_CTRL with PMLEN != 0), those two addresses differ: a user pointer whose top PMLEN bits hold a tag passes access_ok() after untagging, but the atomic is then performed on the still-tagged raw address. Supervisor-mode data accesses are not subject to the U-mode pointer masking (that is governed by menvcfg.PMM, which the kernel does not set), so hardware does not strip the tag for the kernel's own access. With Sv57 and PMLEN=16 the tag bits overlap the canonical-address bits, so a tagged pointer can name a canonical kernel virtual address (e.g. in the linear map) whose untagged form is a valid user address. An unprivileged process can thus make FUTEX_WAKE_OP perform an atomic read-modify-write on an arbitrary kernel address, with the matching FUTEX_OP_CMP_* result serving as a read oracle. get_user()/put_user()/raw_copy_{to,from}_user() already untag the pointer after the access_ok() check; do the same in the futex helpers so the atomic operates on the address that was actually validated. | ||||
| CVE-2026-99017 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: riscv: errata: select RISCV_ALTERNATIVE_EARLY for THEAD GHOSTWRITE errata_probe_ghostwrite() only marks the CPU as vulnerable when it is called at the RISCV_ALTERNATIVES_EARLY_BOOT stage, and the mitigation in ghostwrite_enable_mitigation() only takes effect if the vulnerable state was recorded before the boot alternatives are patched. The early boot stage is only executed when CONFIG_RISCV_ALTERNATIVE_EARLY is enabled, which currently is only selected by ERRATA_THEAD_MAE. In a kernel built with ERRATA_THEAD_GHOSTWRITE=y but ERRATA_THEAD_MAE=n, the early alternatives never run, so ghostwrite_state is never set to VULNERABLE: ghostwrite_enable_mitigation() returns false, xtheadvector remains enabled, and sysfs reports "Not affected" on a vulnerable T-Head C9xx CPU. Select RISCV_ALTERNATIVE_EARLY from ERRATA_THEAD_GHOSTWRITE so that the vulnerability is detected in the early boot stage and the default mitigation is applied. | ||||
| CVE-2026-99020 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: regulator: tps6594-regulator: Fix n_linear_ranges for TPS65224 BUCK2-4 The TPS65224 BUCK2, BUCK3 and BUCK4 descriptors pass 4 as n_linear_ranges, but tps65224_bucks_2_3_4_ranges[] only has two entries, covering selectors 0x00-0x45. The linear range helpers loop over n_linear_ranges entries, so any lookup of a selector above 0x45 reads past the end of the array and treats whatever follows it as two more ranges. This happens on the normal registration path when the core checks the voltage constraints against every selector. TPS652G1 uses the same descriptors and is affected too. Use ARRAY_SIZE() so the count always matches the table. | ||||
| CVE-2026-99021 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: regulator: of: fill in supply names in of_regulator_bulk_get_all() of_regulator_bulk_get_all() returns an array it allocated itself, and fills in only the consumer of each entry. Every other way of getting a bulk array has the supply name set, because the caller provides it, and the core expects it to be there: regulator_bulk_enable() prints it when a supply fails to enable, so a caller that hands such an array to it dereferences uninitialised memory on that path. Copy each name into the array's own allocation, right behind the entries, so that it shares the array's lifetime and callers still have nothing extra to free. That also retires the fixed 64 byte stack buffer the names were assembled in, which is_supply_name() never bounded the copy against. | ||||
| CVE-2026-99022 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: regulator: ltc3676: don't read the write-only HRST and CLIRQ registers HRST (0x1e) and CLIRQ (0x1f) are write-only command strobes. Writing HRST triggers a hard reset of the chip and writing CLIRQ clears the interrupt; reading them returns nothing useful, and the read itself fires the command. The result is that a plain register dump resets the board: cat /sys/kernel/debug/regmap/2-003c/registers walks every readable register, hits HRST, and the board reboots. Split the callback back in two so HRST and CLIRQ stay writable but are no longer readable. The readable range is left unchanged (LTC3676_BUCK1 ... LTC3676_IRQSTAT). | ||||
| CVE-2026-99023 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: power: sequencing: pcie-m2: Fix leaking array from of_regulator_bulk_get_all() of_regulator_bulk_get_all() allocates the consumers array and hands it to the caller, who is expected to free it at an appropriate time. pwrseq-pcie-m2.c never did, leading to a memory leak. Add an explicit kfree() for the consumers array. | ||||
| CVE-2026-99024 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: optee: register TEE devices only once fully initialized optee_probe() called tee_device_register() on both the client and the supplicant device before the rest of struct optee had been initialized. tee_device_register() calls cdev_device_add(), which does two things at once: it creates /dev/tee0 and /dev/teepriv0, and it links the device into the tee class so that class_find_device() can find it. From that moment on the device is reachable both from user space via tee_open() and from kernel space via tee_client_open_context(). The only gate in teedev_open() is tee_device_get(), which merely checks that teedev->desc is non-NULL, which was already set by tee_device_alloc(). Therefore, there is effectively no gate at all. A context opened in that window can run against a struct optee where - optee->call_queue.mutex is not initialized by optee_cq_init() - optee->supp mutex and completions is not initialized by optee_supp_init() - optee->rpmb_dev_mutex is not initialized yet, - the message argument cache is not initialized by optee_shm_arg_cache_init() - optee->ctx is still NULL Any open session or invoke during this window takes uninitialized mutexes and dereferences a NULL pointer. Fix it by moving both tee_device_register() calls down to the point where all of struct optee is set up. [JW: adding fixes and cc] | ||||
| CVE-2026-108468 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-23 | 7 High |
| Use after free in Windows Installer allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-108450 | 1 Microsoft | 5 365 Apps, Microsoft Office Ltsc 2021, Microsoft Office Ltsc 2024 and 2 more | 2026-10-23 | 8.8 High |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-108453 | 1 Microsoft | 11 365 Apps, Microsoft 365, Microsoft Office Ltsc 2021 and 8 more | 2026-10-23 | 6.5 Medium |
| Out-of-bounds read in Microsoft Office PowerPoint allows an unauthorized attacker to disclose information over a network. | ||||
| CVE-2026-103525 | 2 Wordpress-extensions, Wpmanageninja | 2 Fluentcart, Fluentcart | 2026-10-23 | 7.5 High |
| The FluentCart A New Era of eCommerce – Faster, Lighter, and Simpler plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 1.7.0 via the 'order_id + billing_address_id (also shipping_address_id)' parameter due to missing validation on a user controlled key. This makes it possible for unauthenticated attackers to read and exfiltrate another customer's stored billing and shipping address PII — including street address, city, state, postcode, phone number, company name, VAT number, and legal registration ID — by enumerating sequential AUTO_INCREMENT order and address ID pairs. The id-equality guard intended to restrict address reuse is bypassed because the attacker controls both halves of the compared pair, and the unauthenticated AJAX entry point imposes only a soft rate limit of 5 requests per 60 seconds rather than any authentication or ownership check. | ||||
| CVE-2026-11828 | 1 Ibm | 3 Mq Advanced Container Images, Mq Operator, Supplied Mq Advanced Container Images | 2026-10-23 | 5.9 Medium |
| IBM MQ could allow a remote attacker with queue manager control or man-in-the-middle access on unencrypted channels to cause a denial of service in client applications using asynchronous message consumption due to improper validation of queue name length values. | ||||
| CVE-2026-86020 | 1 Part-db | 1 Part-db | 2026-10-23 | 4.6 Medium |
| Part-DB is an open source inventory management system for electronic components. Prior to version 2.13.2, Part-DB contains a spreadsheet formula injection vulnerability in the part import/export workflow. An authenticated user with permission to import parts can import a CSV file containing formula-prefixed values, such as =1+1, into user-controlled part fields. When the affected part is later exported as an XLSX spreadsheet, Part-DB writes the attacker-controlled value using PhpSpreadsheet's setCellValue() method without neutralising spreadsheet formula characters. As a result, the exported XLSX file contains an executable spreadsheet formula cell rather than a plain text value. If another user exports and opens the spreadsheet, the formula may be evaluated by their spreadsheet software. This issue has been patched in version 2.13.2. | ||||
| CVE-2026-63120 | 1 Aiven-open | 1 Pghoard | 2026-10-23 | 8.4 High |
| pghoard is a PostgreSQL backup daemon and restore tooling that stores backup data in cloud object stores. Prior to version 2.7.2, an incomplete path traversal fix in pghoard allows an attacker with write access to the backup object storage (such as S3, GCS, or Azure) to execute arbitrary file writes and directory creation outside the designated PostgreSQL data directory (pgdata). When a database administrator executes a restore operation (via pghoard_restore get-basebackup), a maliciously crafted delta backup manifest with path traversal sequences (e.g., ../../../../etc/cron.d/backdoor) will write arbitrary payloads to the host system. This issue has been patched in version 2.7.2. | ||||
| CVE-2026-57208 | 2026-10-23 | N/A | ||
| Entire CLI hooks into Git workflows to capture AI agent sessions. Prior to version 0.7.7, a path traversal vulnerability in Entire CLI allows an attacker with push access to the checkpoints repository to craft malicious checkpoint metadata that causes entire session resume or entire checkpoint rewind to write attacker-controlled transcript data outside of the expected session directory. The issue occurs because checkpoint metadata is fetched from the remote entire/checkpoints/v1 branch and the SessionID field was used to construct filesystem paths without validation in the restore path. A malicious SessionID containing absolute paths or path traversal sequences could cause arbitrary files on the victim’s machine to be overwritten. This issue has been patched in version 0.7.7. | ||||
| CVE-2026-57121 | 1 Mervinpraison | 1 Praisonai | 2026-10-23 | 8.1 High |
| PraisonAI is a multi-agent teams system. From version 0.1.4 to before version 0.1.5 in praisonai-platform, a workspace member can permanently delete any resource — projects, agents, issues, labels, issue dependencies, and issue-label attachments — created by the workspace owner or other members. All six content DELETE endpoints enforce workspace membership but perform no ownership or role check. A single malicious or compromised member account can wipe an entire workspace's content irreversibly. This issue has been patched in version 0.1.5. | ||||
| CVE-2026-57113 | 1 Mervinpraison | 1 Praisonai | 2026-10-23 | 8.1 High |
| PraisonAI is a multi-agent teams system. From version 2.6.0 to before version 4.6.59, PraisonAI's template loader accepts GitHub template URIs with refs, for example github:owner/repo/template@v1.0.0. The resolver stores the user-controlled template path and ref verbatim, and the cache layer later joins those values into ~/.praison/cache/templates/github/<owner>/<repo>/<template>/<ref> without normalizing each segment or checking that the final path remains inside the template cache root. A crafted ref such as ../../../../../../outside-delete-target therefore escapes the cache directory. The first load can write .cache_meta.json outside the cache. If the normal cache hierarchy for the same owner/repo/template has already been created, the same path reaches shutil.rmtree(cache_path) and removes an attacker-selected outside directory before replacing it with cache metadata. This issue has been patched in version 4.6.59. | ||||
| CVE-2026-55889 | 1 Flatpak | 1 Xdg-desktop-portal | 2026-10-23 | N/A |
| XDG Desktop Portal is a desktop integration portal. Prior to version 1.22.1, malicious sandboxed applications can use the FileTransfer.RetrieveFiles method to redirect drag-and-drop and copy-paste data targeted at other applications to itself. Some portals generate tokens which provide access to resources. The sharing of the token transfers access to the resource and is supposed to happen out of band. The tokens were generated with g_random_int or g_uuid_string_random, both of which use GLib's GRand based on the Mersenne Twister PRNG which created a stream of reproducible random numbers. By generating enough tokens, the state of the GRand can be recover and with it, the next tokens can be predictedinsufin. This issue has been patched in version 1.22.1. | ||||
| CVE-2026-55459 | 2026-10-23 | 7.4 High | ||
| The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. From version 25.01 to before version 26.05, AuthenticationEndpoint.verifyOpenIdToken builds its verifier as JWT.require(algorithm).withIssuer(issuer).build() and does not enforce the aud claim during cryptographic validation. The aud check is performed manually afterwards via a single string-equality call, which only handles single-string aud values. In a multi-RP IdP setup, a token whose single-string aud matches the viewer's client ID but was issued for a different relying party passes the check and authenticates the attacker as the token's sub. This issue has been patched in version 26.05. | ||||
| CVE-2026-54615 | 1 Part-db | 1 Part-db | 2026-10-23 | N/A |
| Part-DB is an open source inventory management system for electronic components. Prior to version 2.12.1, LogEntryExtraFormatter builds the HTML shown in the "Extra" column of the activity-log table (/log) and in element history tables. Every branch of LogEntryExtraFormatter::getInternalFormat() runs user-controlled strings through htmlspecialchars() before placing them into the HTML it returns — except the CollectionElementDeleted branch, which interpolates getOldName() (and getCollectionName()) into a sprintf() template with no escaping. The returned string is emitted by LogEntryExtraColumn::render() and inserted as raw HTML into the DataTables cell (the bundle does not escape column output; sibling columns call htmlspecialchars() themselves). CollectionElementDeleted.getOldName() is the name of a deleted collection sub-element — a part Parameter, Attachment, PartLot, Orderdetail, etc. — all freely set by any user with edit rights on the owning element. A low-privileged content editor can therefore store an HTML/script payload as the name of such a sub-element, delete it (which writes the log entry), and have that markup parsed as live DOM in the browser of a higher-privileged victim (an administrator/auditor with system.show_logs, or any user viewing that element's history). This is a stored cross-site-scripting / HTML-injection defect caused by a single missed sanitizer in one sibling branch. CSP policies block inline javascript execution under normal conditions. This issue has been patched in version 2.12.1. | ||||