Export limit exceeded: 413926 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (413926 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98930 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix IRQ injection with SIGP Stop and Store Status When __inject_sigp_stop() is called for a Stop and Store Status operation, if the vCPU is running, the interrupt is marked as pending and the status is stored by the thread performing the KVM_RUN IOCTL. If the vCPU is already stopped, the status is stored immediately. Storing the status means writing into userspace, which might fault, and __inject_sigp_stop() is called from do_inject_vcpu() which in turn is always called holding a spinlock, which is obviously an issue. Fix this by returning -EWOULDBLOCK from __inject_sigp_stop(), and adding a bool flag to indicate whether a store status is needed. The callers of do_inject_vcpu() are modified to pass the pointer to the bool flag; whenever a Store Status operation is needed, the callers can now perform it outside the spinlock. Opportunistically refactor kvm_s390_set_irq_state() to use scoped_guard() and __free(). [ Added Fixes tag while picking -- Claudio ] | ||||
| CVE-2026-98931 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: spinand: fix NULL pointer dereference with no ECC engine When "nand-no-ecc-engine" is set in DT, nanddev_get_ecc_engine() takes the NAND_ECC_ENGINE_TYPE_NONE path and returns success while leaving nand->ecc.engine NULL. The SPI-NAND code nevertheless dereferences it unconditionally to test for a pipelined engine, so probing such a device oopses immediately. Rather than open-coding the test three times, add a nand_ecc_is_pipelined() helper to the NAND core that folds the NULL check into the integration comparison, and use it everywhere. Future callers then cannot reintroduce the problem. | ||||
| CVE-2026-98939 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: x86/mm: Drop unnecessary PMD page copy when freeing On a box with a discrete GPU, lockdep reports a possible deadlock as soon as kswapd shrinks the TTM page pool. The immediate cause is an x86 commit that added an mmap_read_lock() to kernel page protection munging code. The huge vmap code holds the same lock over a GFP_KERNEL allocation, which is a no-no now that reclaim can take it. That allocation is in a page table *free* path and ends up being for dubious purposes[1]. Basically, it tries to avoid hardware setting Accessed=1 in page table entries that are unreachable by the hardware, a non-issue. Remove the PMD copy. Detach the original PMD page at the PUD, flush the mid-level caches, and free the PTE tables straight from the detached PMD page. With no allocation left, the locking issue is gone. Lockdep splat/analysis: WARNING: possible circular locking dependency detected 7.3.0-rc3-f6e7b42bf05b+ #183 Tainted: G U ------------------------------------------------------ kswapd0/269 is trying to acquire lock: ((init_mm).mmap_lock){++++}-{4:4}, at: change_page_attr_set_clr+0x29a/0x4a0 but task is already holding lock: (pool_shrink_rwsem){.+.+}-{4:4}, at: ttm_pool_shrink+0xb2/0x330 [ttm] Chain exists of: (init_mm).mmap_lock --> fs_reclaim --> pool_shrink_rwsem The cycle is built from three edges: 1) pool_shrink_rwsem -> (init_mm).mmap_lock The TTM shrinker restores the caching attribute of every page it frees, while holding pool_shrink_rwsem: ttm_pool_shrink() -> ttm_pool_dispose_list() -> ttm_pool_free_page() -> set_pages_wb() -> change_page_attr_set_clr() [ init_mm mmap read lock ] 2) fs_reclaim -> pool_shrink_rwsem The same shrinker, called from reclaim. 3) (init_mm).mmap_lock -> fs_reclaim ioremap() installing a huge PUD mapping over an existing PMD table: ioremap_page_range() -> vmap_range_noflush() -> vmap_try_huge_pud() [ init_mm mmap read lock ] -> pud_free_pmd_page() -> __get_free_page(GFP_KERNEL) [ enters reclaim ] [ dhansen: Lots of changelog munging/trimming and merged comments from my version of the fix. ] | ||||
| CVE-2026-99049 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpio: xilinx: fix runtime PM leak on request error path pm_runtime_get_sync() leaves the usage counter incremented even when it fails, and xgpio_request() returns the error without dropping it. gpiolib does not call ->free() when ->request() fails, so xgpio_free(), which holds the only matching pm_runtime_put(), never runs. The reference is leaked and the controller can no longer runtime-suspend, so its clock stays enabled. Switch to pm_runtime_resume_and_get(), which only increments the usage counter on success. | ||||
| CVE-2026-99063 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dm ioctl: don't let data_start run past the buffer struct dm_ioctl has seven bytes of trailing padding, so the smallest buffer userspace is allowed to ask for, offsetof(struct dm_ioctl, data), is seven bytes shorter than sizeof(struct dm_ioctl). get_result_buffer() sets data_start to sizeof(struct dm_ioctl) without looking at how big the buffer actually is. Ask for the minimum and data_start ends up seven bytes past the end. Callers add it to data_size, and ctl_ioctl() copies that much back to userspace: BUG: KASAN: slab-out-of-bounds in _copy_to_user+0xad/0xd0 Read of size 312 at addr ffff8880169e4c00 by task repro-dm/140 ctl_ioctl+0x5e3/0xcb0 dm_ctl_ioctl+0x25/0x40 allocated 305-byte region [ffff8880169e4c00, ffff8880169e4d31) A DM_LIST_DEVICES with data_size set to 305 is enough to hit it, and the seven bytes that leak are whatever sat next to the allocation. Clamp data_start to the buffer size. Note that this is not a security bug because the out-of-bounds read can only be triggered by root. | ||||
| CVE-2026-99068 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: ctxfi: Fix memory leakage when clearing DAO input mappers Commit e576e7843c0d ("ALSA: ctxfi: Simplify dao_clear_{left,right}_input() functions") centralized the DAO input mapper clearing logic in dao_clear_input(), but omitted the kfree() calls. It removes the mapper entries from the list and sets their pointers to NULL without freeing the allocated array. This leaks memory each time dao_clear_input() is called. Store the base pointer of the allocation before clearing the mapper entries and free the array after removing entries from the list. | ||||
| CVE-2026-99070 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: do not warn on route notification size race fib6_info_hw_flags_set() sizes the skb with rt6_nlmsg_size() and later fills it with rt6_fill_node(). With nexthop compatibility mode enabled, a concurrent replacement can grow the group between these independent snapshots. rt6_fill_node() can then legitimately return -EMSGSIZE, so the warning does not prove a sizing bug. Remove the warning. The existing error path still frees the skb and reports the error to listeners. | ||||
| CVE-2026-99071 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: do not warn on route notification size race Commit 680aea08e78c ("net: ipv4: Emit notification when fib hardware flags are changed") added asynchronous route notifications for hardware flag changes. fib_alias_hw_flags_set() sizes the skb with fib_nlmsg_size() and later fills it with fib_dump_info() while holding only RCU. With nexthop compatibility mode enabled, a concurrent replacement can grow the group between these independent snapshots. fib_dump_info() can then legitimately return -EMSGSIZE, so the warning does not prove a sizing bug. Remove the warning. The existing error path still frees the skb and reports the error to listeners. | ||||
| CVE-2026-99072 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: stop route notification sizing when nexthop group shrinks Commit 680aea08e78c ("net: ipv4: Emit notification when fib hardware flags are changed") added an RCU-only fib_nlmsg_size() call for asynchronous hardware flag notifications. fib_nlmsg_size() checks fib_info_num_path() before each iteration, then fib_info_nhc() independently reloads nh->nh_grp. If RTM_NEWNEXTHOP replaces a group with fewer paths between those loads, fib_info_nhc() returns NULL and fib_nexthop_nlmsg_size() dereferences it. Stop sizing when the indexed path is absent. Nexthop groups are dense, so the current snapshot has no later path. | ||||
| CVE-2026-99074 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: stop PMTU walk when nexthop group shrinks Commit 7d3f3b4367f3 ("net: ipv4: Cache pmtu for all packet paths if multipath enabled") made __ip_rt_update_pmtu() update every path. For nexthop objects, fib_info_num_path() and fib_info_nhc() independently load nh->nh_grp. RCU protects each group's lifetime but does not make the loads observe the same group. If replacement shrinks the group after the loop accepts an index, fib_info_nhc() returns NULL and update_or_create_fnhe() dereferences it. A deterministic probe only widened the existing window between the real operations. On v7.2, an RTM_NEWNEXTHOP replacement published a one-member group after the PMTU reader accepted index 1 from a two-member group, producing: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: update_or_create_fnhe+0x45/0x15b0 Stop when the indexed path is absent. Groups are dense, so no later index exists in that snapshot. The same real-writer window completed 114,423 PMTU iterations without an oops with this check. A reproducer is available on request. Replacement requires CAP_NET_ADMIN in the network namespace. Where unprivileged user namespaces are permitted, a local user can obtain it in a new user and network namespace. | ||||
| CVE-2026-99081 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: fix DMA mapping length for padded small packets Stefan Fleischmann reported Intel IOMMU DMA Read faults on BCM57412 NetXtreme-E NICs when transmitting packets on VLAN/macvlan interfaces: DMAR: [DMA Read NO_PASID] Request device [18:00.0] fault addr 0xfc499000 [fault reason 0x06] PTE Read access is not set bnxt_en 0000:18:00.0 eno1np0: Abandoning msg {0xb4 0x41a} len: 0 due to firmware status: 0x2000001 ... NETDEV WATCHDOG: eno1np0 (bnxt_en): transmit queue 0 timed out The fault address (0xfc499000) is on an exact 4KB page boundary, pointing to a DMA read buffer overrun. In bnxt_start_xmit(), packets smaller than BNXT_MIN_PKT_SIZE (52 bytes), such as 42-byte untagged ARP frames, are padded: if (length < BNXT_MIN_PKT_SIZE) { pad = BNXT_MIN_PKT_SIZE - length; if (skb_pad(skb, pad)) goto tx_kick_pending; length = BNXT_MIN_PKT_SIZE; } mapping = dma_map_single(&pdev->dev, skb->data, len, DMA_TO_DEVICE); ... dma_unmap_len_set(tx_buf, len, len); However, 'len' was initialized earlier to skb_headlen(skb) (e.g. 42 bytes) and is left unadjusted after padding. Consequently, dma_map_single() and dma_unmap_len_set() map and track only 42 bytes. Later, the hardware TX buffer descriptor is programmed with the padded length: txbd->tx_bd_len_flags_type = cpu_to_le32(((len + pad) << TX_BD_LEN_SHIFT) | flags | TX_BD_FLAGS_PACKET_END); The NIC DMA engine is thus instructed to read 52 bytes from a region where only 42 bytes were DMA-mapped. If skb->data ends near the boundary of a 4KB page (within 'pad' bytes of the next page), the hardware DMA read overruns into the unmapped adjacent page, triggering an IOMMU fault. This issue was exposed after commit 447cbe95ebb9 ("vlan: fix skb_under_panic and races when toggling HW VLAN offload") because reserving extra VLAN headroom rounded LL_RESERVED_SPACE from 48 up to 64 bytes, shifting skb->data offsets and potentially causing small frames to land right against page boundaries. Fix this by using skb_put_padto(skb, BNXT_MIN_PKT_SIZE) in bnxt_start_xmit(), before skb_shinfo(skb)->nr_frags is sampled, because padding might linearize the skb. This ensures skb->len and skb_headlen(skb) reflect the padded size so that dma_map_single() maps the full buffer and the descriptor length is consistent. This also removes the temporary 'pad' variable and masking logic. The padding is done after the SW USO branch, otherwise bnxt_sw_udp_gso_xmit() would account the padding as UDP payload and send it in extra segments. Note that SW USO segments are still not padded: with IPv4, a segment carrying less than 10 bytes of UDP payload (small gso_size, or a short last segment) is sent as a frame shorter than BNXT_MIN_PKT_SIZE. This is a separate issue, left for a followup patch. | ||||
| CVE-2026-99082 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Use active memslots for the per-vCPU MMIO cache KVM tags the per-vCPU MMIO cache with a memslot generation so that a memslot update invalidates cached MMIO information. Both the fill and validation paths use kvm_memslots(), which unconditionally selects address space 0, even when the vCPU is running in SMM and using address space 1. Commit 56f17dd3fbc4 ("kvm: x86: fix stale mmio cache bug") added the memslot generation to the cache key so that a memslot update could not leave a stale entry valid. When commit 699023e23965 ("KVM: x86: add SMM to the MMU role, support SMRAM address space") added the SMM address space, these helpers were not converted to use the active memslots. Consequently, an update to the SMM memslots can leave an entry from the old SMM address space apparently valid after the vCPU returns to the normal address space. A guest can then cause an access to valid RAM at the same GFN to be returned to userspace as KVM_EXIT_MMIO. Completing that exit through the VMM's RAM address space writes the backing page without going through KVM's write-tracking path. If the page backs a nested EPT table, KVM can continue using shadow translations derived from the old contents. The WARN_ON_ONCE() in kvm_mmu_write_protect_fault() catches this invalid cache and memslot combination. Use the vCPU's active memslots when caching and validating the entry. Memslot generations are unique across address spaces, so the generation also distinguishes the normal and SMM views. This matches the MMIO SPTE cache, which already uses kvm_vcpu_memslots(). On an unpatched current-mainline kernel, a regression test that fills the cache in SMM and updates only the SMM memslots fails the intended RAM write and triggers the kvm_mmu_write_protect_fault() warning. With this change, the same test completes the RAM write without a warning. The x86/smm_test, set_memory_region_test, and memslot_modification_stress_test selftests also pass. | ||||
| CVE-2026-99083 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix heap out-of-bounds write in krb5_authenticate() In krb5_authenticate(), out_len is calculated to determine available headroom in response_buf for the incoming Kerberos AP-REP token. However, when SMB2_SESSION_SETUP is processed as a non-first element of a compounded SMB2 request, the calculation omits work->next_smb2_rsp_hdr_off. This causes out_len to overstate remaining buffer headroom by the cumulative size of prior responses in the compound chain. Consequently, the length check in ksmbd_krb5_authenticate() (*out_len <= resp->spnego_blob_len) passes erroneously, allowing memcpy() to write the AP-REP blob past the end of response_buf into adjacent kernel heap memory. Fix this by subtracting work->next_smb2_rsp_hdr_off when computing out_len, ensuring it accurately reflects physical remaining buffer space. | ||||
| CVE-2026-70241 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-23 | 7 High |
| Use after free in Windows Kerberos allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-70243 | 1 Microsoft | 4 Windows 11 23h2, Windows 11 23h2, Windows Server 2025 and 1 more | 2026-10-23 | 7 High |
| Use after free in Windows Kernel allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-83911 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-23 | 7 High |
| Heap-based buffer overflow in Windows Storage allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-84014 | 1 Microsoft | 27 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 24 more | 2026-10-23 | 7 High |
| Heap-based buffer overflow in Windows Device Association Service allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-85323 | 1 Microsoft | 14 Windows 10 1607, Windows 10 1809, Windows Server 2012 and 11 more | 2026-10-23 | 6.8 Medium |
| Weak authentication in Network Device Enrollment Service (NDES) allows an authorized attacker to perform spoofing over a network. | ||||
| CVE-2026-85333 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-23 | 6.7 Medium |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Performance Monitor allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-85353 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-23 | 7.5 High |
| Out-of-bounds read in Windows Print Spooler Components allows an unauthorized attacker to disclose information over a network. | ||||