Export limit exceeded: 15536 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (15536 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-57014 | 1 Google | 1 Android | 2026-09-20 | 7.8 High |
| In phNxpNciHal_ext_process_nfc_init_rsp of phNxpNciHal_ext.cc, there is a possible out-of-bounds write due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. | ||||
| CVE-2026-58701 | 1 Google | 1 Android | 2026-09-20 | 7 High |
| In trusty_dputc of generic-arm64-smcall.c, there is a possible out-of-bounds write due to a race condition. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. | ||||
| CVE-2026-58773 | 1 Google | 1 Android | 2026-09-20 | 6.7 Medium |
| In link_load_gnss_image of link_device.c, there is a possible out-of-bounds write due to a missing bounds check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. | ||||
| CVE-2026-89783 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: xfrm6: fix out-of-bounds write in xfrm6_input_addr() when secpath is full The depth check in xfrm6_input_addr() is off by one: if (1 + sp->len == XFRM_MAX_DEPTH) goto drop; ... sp->xvec[sp->len++] = x; xfrm_input() can leave sp->len == XFRM_MAX_DEPTH, and the transport-mode receive path re-enters IPv6 input via xfrm_trans_reinject() with that secpath preserved. If the inner packet carries a destination-options HAO option or a type-2 routing header, xfrm6_input_addr() is called with sp->len == XFRM_MAX_DEPTH; the check (1 + 6 == 6) is false, so sp->xvec[sp->len++] writes one slot past the 6-element xvec[]. The write stays within the sec_path allocation (invisible to KASAN); UBSAN_BOUNDS flags it and panics under panic_on_warn. Use "sp->len >= XFRM_MAX_DEPTH", matching xfrm_input(). This also restores one chain level the old check rejected at sp->len == 5. UBSAN: array-index-out-of-bounds in net/ipv6/xfrm6_input.c:309:10 index 6 is out of range for type 'xfrm_state *[6]' | ||||
| CVE-2026-90078 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_skbmod: fix length calculations and avoid invalid header warnings syzbot reported a warning in skb_network_header_len() triggered by tcf_skbmod_act(): !skb_transport_header_was_set(skb) WARNING: CPU: 0 PID: 14949 at include/linux/skbuff.h:3243 skb_network_header_len include/linux/skbuff.h:3243 [inline] WARNING: CPU: 0 PID: 14949 at net/sched/act_skbmod.c:55 tcf_skbmod_act+0xfe8/0x1810 net/sched/act_skbmod.c:55 There are a few issues in tcf_skbmod_act(): 1. Calling skb_network_header_len() assumes skb->transport_header is set, which is not guaranteed when tcf_skbmod_act() runs at TC ingress. 2. Unconditionally calling skb_mac_header_len() at the beginning of tcf_skbmod_act() triggers a warning on L3 devices (e.g. TUN) where the MAC header is unset, evaluating to an underflowed garbage length. 3. On TC ingress, skb->data points to the network header. Adding the MAC header length to the IP header length causes skb_ensure_writable() to request more bytes than the actual IP packet length, dropping valid short packets (e.g. 28-byte UDP/IPv4 packets). Fix these by: - Using skb_network_offset(skb) + sizeof(struct iphdr/ipv6hdr) for SKBMOD_F_ECN so that the required length is correctly calculated on both ingress (offset == 0) and egress (offset == mac_len). - Setting max_edit_len to ETH_HLEN for Ethernet header modifications after validating ARPHRD_ETHER. | ||||
| CVE-2026-90120 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v5: Check get_logical_index() return value in MADT IAFFID parsing In gic_acpi_parse_iaffid() a given MADT GICC entry might not correspond to a logical cpu recognized by the kernel, resulting in the cpu variable initialization to an error value. Currently, the get_logical_index() return value is not checked for failure, which might result in out-of-bounds memory corruption while trying to index a per_cpu variable array. Add a check to evaluate get_logical_index() return value. | ||||
| CVE-2026-90379 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: Add PCIe AER handler support to prevent system crash When an AER error occurs and the bus is hung, the register reads return 0xFFFFFFFF, causing the DMA queue state to be corrupted and resulting in an invalid memory access when accessing q->desc[] or q->entry[]. Unable to handle kernel paging request at virtual address ffffffc01099eac0 pc : mt76_dma_add_buf+0x124/0x188 [mt76] lr : mt76_dma_rx_fill+0x11c/0x1d8 [mt76] sp : ffffffc016d9bbf0 x29: ffffffc016d9bc10 x28: 0000000000000000 x27: 0000000000000000 x26: ffffffb7855e50b8 x25: ffffffb80d04f000 x24: 0000000000000000 x23: 0000000000000ec0 x22: ffffffb796803648 x21: ffffffb796801f80 x20: ffffffb7968035f8 x19: 0000000000000ec0 x18: 0000000000000000 x17: 000000004ec00000 x16: 000000000ec00000 x15: ffffffc01099eac0 x14: 000000004ec00000 x13: 00000000ffc5a000 x12: ffffffc016d9bc32 x11: 00000000ffffffff x10: 0000000000000002 x9 : 0000000000000000 x8 : 000000000000b4ac x7 : 0000000000000a20 x6 : ffffffb6c1806400 x5 : 0000000000000000 x4 : ffffffb80d04f000 x3 : 0000000000000000 x2 : 0000000000000001 x1 : 000000000ec04000 x0 : ffffffb7968035f8 Call trace: mt76_dma_add_buf+0x124/0x188 [mt76 (HASH:1029 4)] mt76_dma_rx_reset+0xe8/0xfc [mt76 (HASH:1029 4)] mt7921_wpdma_reset+0x188/0x1b0 [mt7921e (HASH:ee48 5)] mt7921e_mac_reset+0x128/0x418 [mt7921e (HASH:ee48 5)] mt7921_mac_reset_work+0xac/0x1a8 [mt7921_common (HASH:f721 6)] process_one_work+0x188/0x514 worker_thread+0x12c/0x300 kthread+0x140/0x1fc ret_from_fork+0x10/0x30 Fix the invalid memory access by validating the DMA index read from the hardware before it is used as a queue index. An out-of-range value, such as the 0xFFFFFFFF returned while the bus is hung, is now clamped so it can no longer corrupt q->head or q->tail. In addition, check the bus_hung flag in mt7921_mac_reset_work() before attempting the reset sequence, reject MCU messages while the bus is hung, and install no-op bus operations when an unrecoverable AER error is detected, preventing further invalid hardware accesses. Due to hardware limitations - such as the lack of a connected hardware reset pin or the absence of host re-probe functionality - affected Wi-Fi devices may not fully recover to a normal operational state after certain errors, even with AER enabled. | ||||
| CVE-2026-90274 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: coresight: etm4x: fix underflow for usage of (nrseqstate - 1) According to IHI006H Embedded Trace Macrocell Architecture Specification[0], TRCSEQEVR<n> is implemented only when TRCIDR5.NUMSEQSTATE is 0b100, in which case n ranges from 0 to 2; otherwise, TRCIDR5.NUMSEQSTATE is 0b000. IOW, the number of usage in the initialisation or setting TRCSEQEVR<n> with drvdata->nrseqstate - 1 in the loop could make underflow issue when TRCIDR5.NUMSEQSTATE is 0b000. Therefore, introduce nr_seq_ctrls field and untie it from nrseqstate. As part of this introduce ETM_MAX_SEQ_TRANSITIONS macro and apply nr_seq_ctrls and above macro to TRCSEQEVR<n> relevant fields setup. | ||||
| CVE-2026-90414 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: IB/isert: reject PDUs declaring more data than was received isert_recv_done() hands each received PDU to the opcode handlers without ever looking at wc->byte_len, the number of bytes the HCA actually placed in the receive descriptor. The handlers then copy that many bytes - the data-segment length the initiator declared in the BHS (ntoh24(hdr->dlength), via the derived unsol_data_len / imm_data_len) - out of the fixed-size descriptor: isert_handle_iscsi_dataout(): sg_copy_from_buffer(sg_start, sg_nents, isert_get_data(rx_desc), unsol_data_len); isert_handle_scsi_cmd(): sg_copy_from_buffer(cmd->se_cmd.t_data_sg, sg_nents, isert_get_data(rx_desc), imm_data_len); Because the declared length is never checked against wc->byte_len, an initiator can declare a data segment larger than the bytes it actually sent (and larger than the descriptor) and cause an out-of-bounds read of the receive buffer. Nothing upstream of isert closes this door: - __iscsit_check_dataout_hdr() bounds the inbound payload against conn_ops->MaxXmitDataSegmentLength (MXDSL) - a transmit parameter, used here for the inbound check. - iscsi_set_connection_parameters() sets ops->MaxXmitDataSegmentLength = ops->TargetRecvDataSegmentLength; and TARGETRECVDATASEGMENTLENGTH is absent from the min()-clamp list in iscsi_check_acceptor_state(), so the value the initiator declares is adopted verbatim (type range 512..16777215). The initiator effectively raises its own ceiling. - isert never clamps the negotiated value to its own fixed receive descriptor (ISER_RX_SIZE, 9216 bytes), so the target core's bound and the descriptor size are unrelated. The imm_data_len == data_len path is more than an over-read: it aliases the receive descriptor via sg_set_buf() and passes it to the backend as the data source for the SCSI WRITE, so an over-declared length causes heap contents past the descriptor to be written through the backend to the backing store. The backend is the victim of the oversized scatterlist isert hands it, not the cause; no read-back of the written bytes was demonstrated. Trigger: after login completes (full feature phase), an initiator that has declared a large TargetRecvDataSegmentLength and a FirstBurstLength that permits unsolicited/immediate data sends a PDU whose declared data-segment length exceeds what was received. With KASAN: BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0x150/0x1c0 Read of size 4096 at addr ffff888109720800 by task kworker/1:0H/25 Workqueue: ib-comp-wq ib_cq_poll_work Call Trace: sg_copy_buffer+0x150/0x1c0 isert_recv_done+0xba6/0x2390 __ib_process_cq+0xe1/0x390 ib_cq_poll_work+0x46/0x150 isert_recv_done+0xba6 resolves to isert_handle_iscsi_dataout() (ib_isert.c:1160), inlined through isert_rx_opcode(). Validate wc->byte_len against the framing in isert_recv_done() before the PDU reaches any handler, and reinstate the connection if it is short. Because the test compares without subtracting the header length, it also rejects PDUs shorter than the iSER and iSCSI headers, which would otherwise be parsed out of stale descriptor contents. The login handler rejects PDUs shorter than ISER_HEADERS_LEN (commit 29e7b925ae6d ("IB/isert: Reject login PDUs shorter than ISER_HEADERS_LEN")) but does not bound the declared length either; that is fixed in the next patch. The data handlers had no length check at all. isert reads the data segment from a fixed offset: isert_get_data() returns the iSER header plus ISER_HEADERS_LEN and makes no adjustment for an AHS. The bytes the handlers touch are therefore exactly [ISER_HEADERS_LEN, ISER_HEADERS_LEN + dlength), and comparing that sum against wc->byte_len bounds precisely the region that is read. An AHS term would only make the test stricter without bounding anything furth ---truncated--- | ||||
| CVE-2026-91951 | 1 Freerdp | 1 Freerdp | 2026-09-20 | 6.5 Medium |
| FreeRDP versions before 3.31.0 contain an out-of-bounds write vulnerability in the urbdrc client channel's urb_send_current_frame_number_result() function. A malicious RDP server can send a crafted 28-byte USB redirection message to trigger a 4-byte write past the allocated 16-byte buffer, causing denial of service when verbose asserts are enabled. | ||||
| CVE-2026-89266 | 1 Stb Vorbis Project | 1 Stb Vorbis | 2026-09-20 | 8.2 High |
| stb_vorbis through 1.22 contains a heap buffer overflow in start_decoder() where the codebook multiplicands allocation size is truncated from size_t to int. Attackers can craft a malicious Ogg Vorbis file with large entries and dimensions values to trigger out-of-bounds writes, causing process crashes or heap corruption. | ||||
| CVE-2026-93190 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/chrome: cros_ec_typec: Reject out-of-bounds PD cap count cros_typec_register_partner_pdos() copies the partner PDOs from the EC TYPEC_STATUS response into the fixed caps_desc.pdo[PDO_MAX_OBJECTS] array. memcpy(caps_desc.pdo, resp->source_cap_pdos, sizeof(u32) * resp->source_cap_count); ... memcpy(caps_desc.pdo, resp->sink_cap_pdos, sizeof(u32) * resp->sink_cap_count); PDO_MAX_OBJECTS is 7. source_cap_count and sink_cap_count are u8 fields from the EC. The only check is that they are not both zero. If either is larger than 7, the memcpy writes past the end of the array on the stack. A count of 255 overflows it by about 1 KB. The EC source arrays are only seven entries wide. A larger count reads past them too. The ChromeOS EC firmware caps these counts today, so a compliant setup does not hit this. The kernel should still validate these values rather than trust them. Validate the counts in cros_typec_register_partner_pdos() next to the memcpy. Skip the PDO registration if either count is above PDO_MAX_OBJECTS. The rest of cros_typec_handle_status() still runs so events are handled and cleared. | ||||
| CVE-2026-94054 | 1 Exim | 1 Exim | 2026-09-20 | 7 High |
| Exim before 4.100.1, when Proxy-Protocol is used with an attacker-controlled proxy, has an out-of-bounds write. | ||||
| CVE-2026-61714 | 1 Fluidsynth | 1 Fluidsynth | 2026-09-20 | 7.8 High |
| FluidSynth is a software synthesizer based on the SoundFont 2 specifications. From 2.2.4 until 2.5.6, configuring synth.midi-channels above 16 allows the MIDI player to index _fluid_player_t::channel_isplaying outside its fixed-size heap allocation while tracking active channels. The resulting out-of-bounds reads and writes invoke undefined behavior and may compromise confidentiality, integrity, or availability. No crafted MIDI file is required because the unsafe condition is created by the channel-count configuration itself. Keeping synth.midi-channels at its default value of 16 avoids the vulnerable path. This issue is fixed in version 2.5.6. | ||||
| CVE-2026-92518 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: riscv, bpf: Fix kernel stack corruption in tailcall with CFI When CONFIG_CFI_CLANG is enabled, prog->bpf_func already skips the kcfi instruction during setup. Including it again in the tailcall jump offset causes it to jump over an extra 4 bytes, skipping the stack pointer adjustment, which will result in kernel stack corruption. | ||||
| CVE-2026-93063 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mei: check SAP message length before reading it Verify the SAP message size is not larger than the local buffer before reading the message to avoid buffer overflow. | ||||
| CVE-2026-63419 | 1 Academysoftwarefoundation | 1 Openimageio | 2026-09-19 | 7.8 High |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.21.0, 3.1.16.0, and 3.2.0.3-beta1, A zbuffer-only tiled iff is exposed with a 16-bit public imagespec while the decoder retains a 32-bit internal pixel size. iffinput::read_native_tile() copies according to m_header.pixel_bytes() rather than imagespec::tile_bytes(true), and a failed read can leave m_buf nonempty so a later call copies partially initialized data into the undersized caller buffer, resulting in a heap out-of-bounds write and memory corruption. The affected implementation is identified by src/iff.imageio/iffinput.cpp, IffInput::read_native_tile(), ImageSpec::tile_bytes(true), m_header.pixel_bytes(), ZBUFFER, and m_buf, which define the relevant source path, functions, state, and trigger. This issue is fixed in versions 3.0.21.0, 3.1.16.0, and 3.2.0.3-beta1. | ||||
| CVE-2026-63638 | 1 Academysoftwarefoundation | 1 Openimageio | 2026-09-19 | 8.3 High |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.21.0, 3.1.16.0, and 3.2.0.3-beta1, A crafted cineon image can declare unsupported component bit depth 26. cineoninput::open() maps it to a 32-bit imagespec, but libcineon maps the unsupported depth to an 8-byte value, so cineoninput::read_native_scanline() causes attacker-controlled data to be written beyond the 4-byte-per-pixel caller buffer, resulting in a heap out-of-bounds write and memory corruption. The affected implementation is identified by src/cineon.imageio/cineoninput.cpp, CineonInput::open(), CineonInput::read_native_scanline(), ComponentDataSize(), bit depth 26, and ImageSpec, which define the relevant source path, functions, state, and trigger. This issue is fixed in versions 3.0.21.0, 3.1.16.0, and 3.2.0.3-beta1. | ||||
| CVE-2026-67549 | 1 Academysoftwarefoundation | 1 Openimageio | 2026-09-19 | 7.6 High |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.1.16.0, A crafted 1-bit contiguous cmyk tiff is exposed through a native uint1 imagespec, so callers allocate a bit-packed buffer. tiffinput::read_native_scanline_locked() nevertheless invokes tiffinput::bit_convert() with 8-bit output and writes one expanded byte per value into that smaller buffer, resulting in a heap out-of-bounds write and memory corruption. The affected implementation is identified by src/tiff.imageio/tiffinput.cpp, TIFFInput::bit_convert(), TIFFInput::read_native_scanline_locked(), PHOTOMETRIC_SEPARATED, 1-bit CMYK, and native uint1 ImageSpec, which define the relevant source path, functions, state, and trigger. This issue is fixed in 3.1.16.0. | ||||
| CVE-2026-84383 | 1 Struktur | 1 Libheif | 2026-09-19 | 9.8 Critical |
| libheif is a HEIF and AVIF file format decoder and encoder. From 1.22.0 until 1.23.2, a crafted HEIF, HEIC, or AVIF item graph using nested iden and auxl references can make HeifPixelImage::transfer_channel_from_image_as() append duplicate Alpha planes with different bit depths to m_storage. HeifPixelImage::scale_nearest_neighbor() in libheif/image/pixelimage.cc allocates the destination Alpha plane using the first plane's 8-bit depth, then iterates a later 10-bit or 12-bit Alpha component and writes uint16_t samples into the same 8-bit allocation. The output geometry controls the overflow extent and the encoded sample values control the data written, allowing a remote file processed by heif_decode_image() to cause a heap out-of-bounds write. This issue is fixed in version 1.23.2. | ||||