Export limit exceeded: 11320 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 398274 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (398274 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98109 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix race condition during device registration In hci_register_dev(), the power_on work item is queued to hdev->req_workqueue before initializing hdev->adv_monitors_idr and registering the MSFT extension via msft_register(). For devices marked with quirks such as HCI_QUIRK_RAW_DEVICE, the HCI_UNCONFIGURED flag is set on the device. When the power_on work item runs concurrently on another CPU, hci_power_on() detects that the device is unconfigured and immediately invokes hci_dev_do_close(), which calls msft_do_close(). Concurrently, msft_register() allocates the msft structure and exposes it to hdev->msft_data prior to calling mutex_init(&msft->filter_lock). If msft_do_close() executes while hdev->msft_data is already assigned but the mutex has not yet been initialized, mutex_lock(&msft->filter_lock) operates on an uninitialized mutex, triggering a DEBUG_LOCKS warning: DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: kernel/locking/mutex.c:625 at __mutex_lock_common kernel/locking/mutex.c:625 [inline] WARNING: kernel/locking/mutex.c:625 at __mutex_lock+0x12d8/0x1550 kernel/locking/mutex.c:821 ... Call Trace: <TASK> msft_do_close+0x308/0x7b0 net/bluetooth/msft.c:693 hci_dev_close_sync+0x86b/0x10a0 net/bluetooth/hci_sync.c:5522 hci_dev_do_close net/bluetooth/hci_core.c:499 [inline] hci_power_on+0x32c/0x750 net/bluetooth/hci_core.c:937 process_one_work kernel/workqueue.c:3322 [inline] process_scheduled_works+0xa8e/0x14e0 kernel/workqueue.c:3405 worker_thread+0x92d/0xe10 kernel/workqueue.c:3486 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Fix this by moving the queue_work() call in hci_register_dev() to after idr_init(&hdev->adv_monitors_idr) and msft_register(hdev) so that device structures and extensions are fully initialized before asynchronous tasks can access them. Additionally, assign hdev->msft_data in msft_register() only after mutex_init(&msft->filter_lock) has completed. | ||||
| CVE-2026-98103 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: igmp: convert struct ip_sf_list to RCU Commit 23d2b94043ca ("igmp: Add ip_mc_list lock in ip_check_mc_rcu") added spin_lock_bh(&im->lock) to ip_check_mc_rcu() to prevent a use-after-free while iterating im->sources during concurrent deletions. However, ip_check_mc_rcu() is called from RCU read-side critical sections in packet receive and route lookup fast paths (e.g. __mkroute_output(), ip_route_input_rcu(), and __udp4_lib_rcv()). When igmpv3_send_cr() or igmpv3_send_report() holds &pmc->lock and calls add_grec() -> igmpv3_newpack() -> ip_route_output_ports(), an XFRM policy matching a multicast destination triggers xfrm_tmpl_resolve_one() -> xfrm4_get_saddr() -> __mkroute_output() -> ip_check_mc_rcu(). This attempts to acquire &im->lock while &pmc->lock is already held on the same CPU, triggering a lockdep recursive locking warning / deadlock. Fix this by converting IPv4 struct ip_sf_list to RCU, mirroring the IPv6 implementation in net/ipv6/mcast.c: 1. Add struct rcu_head to struct ip_sf_list and annotate sf_next, sources, and tomb as __rcu pointers. 2. Use rcu_assign_pointer() and kfree_rcu() for list updates and deletions. 3. Remove spin_lock_bh(&im->lock) from ip_check_mc_rcu() and traverse im->sources locklessly with for_each_psf_rcu(), reading and writing counter fields with READ_ONCE() and WRITE_ONCE(). Note: RCU conversion of /proc/net/mcfilter will be done in a separate patch. | ||||
| CVE-2026-93247 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: mgmt: fix 'hdev->discovery.uuids' NULL dereference 'uuid_count' member of struct 'discovery_state' is assigned and read without any locks, so there is a chance of situation when uuid_count != 0, but uuids is NULL and there will be NULL pointer dereference. Possible race: 'hci_update_passive_scan_sync' 'hci_discovery_filter_clear' hdev->discovery.uuid_count = 0; <----------------------preempted-----------------------------> 'start_service_discovery' // Set uuid_count to value != 0 hdev->discovery.uuid_count = uuid_count; hdev->discovery.uuids = kmemdup(...); <----------------------preempted-----------------------------> spin_lock(&hdev->discovery.lock); kfree(hdev->discovery.uuids); hdev->discovery.uuids = NULL; spin_unlock(&hdev->discovery.lock); Now uuids == NULL and uuid_count != 0. So 'mgmt_device_found' -> 'is_filter_match' -> 'eir_has_uuids' receives non consistent discovery state, where NULL dereference of uuids happens. To fix it let's add discovery.lock around every read/write of uuid_count, uuids pair of struct members. It is also important to assign uuid_count value only after success kmemdup() allocation in start_service_discovery(), otherwise uuids is NULL, because kmemdup failed, but uuid_count is already assigned to non zero value. The following panic happens: [ ] ------------[ cut here ]------------ [ ] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ ] Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP [ ] CPU: 0 PID: 15056 Comm: kworker/u9:2 [ ] Workqueue: hci0 hci_rx_work [ ] pstate: 10400009 (nzcV daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ ] pc : eir_has_uuids+0x2d8/0x590 [ ] lr : is_filter_match+0x258/0x320 ... [ ] Call trace: [ ] eir_has_uuids+0x2d8/0x590 [ ] is_filter_match+0x258/0x320 [ ] mgmt_device_found+0x5b0/0xafc [ ] process_adv_report.part.0+0x8c8/0xf14 [ ] hci_le_adv_report_evt+0x338/0x3f0 [ ] hci_le_meta_evt+0x1f0/0x4c8 [ ] hci_event_packet+0x440/0xc9c [ ] hci_rx_work+0x44c/0xaf8 [ ] process_one_work+0x54c/0x103c [ ] worker_thread+0x6c4/0x10c4 [ ] kthread+0x274/0x2ec [ ] ret_from_fork+0x10/0x20 [ ] Code: 14000004 91004021 eb14003f 54000180 (f9400024) [ ] ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2026-93248 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: don't WARN on kernel job timeout when device already wedged igt@xe_wedged@wedged-at-any-timeout wedges the device in mode 2 (UPON_ANY_HANG_NO_RESET) and then rebinds the driver. During unbind, a GSC proxy kernel submission can still time out; with the device wedged and the GuC CT stopped it can never complete, so its kernel job times out. Tile0: GT1: Kernel-submitted job timed out WARNING: drivers/gpu/drm/xe/xe_guc_submit.c:... at guc_exec_queue_timedout_job() Workqueue: gt-ordered-wq drm_sched_job_timedout Killed queues skip guc_submit_hint_wedged(), leaving 'wedged' false even though the device is already wedged. The timeout handler then treats the kernel queue timeout as unexpected and taints the kernel. Honour an already-wedged device even for killed queues so the expected teardown timeout no longer trips the WARN. (cherry picked from commit a1c1dbd0f047bb05de6aaf6abe9103031179bf19) | ||||
| CVE-2026-93249 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: spi: amlogic-spisg: Make sure clk_init_data is fully initialized The clk_init_data structure contains several mutually-exclusive members for different methods to specify the possible parents of a clock, prompting drivers to initialize only the members they need. However, not initializing all members may cause subtle issues, which are only exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is enabled. aml_spisg_clk_init() fills in init.parent_data, and assumes that init.parent_names is NULL. However, the latter in uninitialized, and thus may cause a crash. Make sure all members are fully initialized, to fix such bugs, and to avoid future breakage when converting drivers to a different method for specifying the parents. | ||||
| CVE-2026-93250 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: mdb: Fix use-after-free in vxlan_mdb_flush() vxlan_mdb_flush() iterates over the MDB entries using hlist_for_each_entry_safe(), which only tolerates the removal of the current entry. Contrary to the comment above the loop, the removal of an entry can trigger the removal of another entry. Flushing the remotes of a (*, G) entry also removes the (S, G) entries that were created for its source list, once they are left without remotes: vxlan_mdb_remotes_flush() -> vxlan_mdb_remote_del() -> vxlan_mdb_remote_srcs_del() -> vxlan_mdb_remote_src_del() -> vxlan_mdb_remote_src_fwd_del() -> __vxlan_mdb_del() -> vxlan_mdb_entry_put() Such an entry can be located after the (*, G) entry in the list, as vxlan_mdb_entry_get() returns an existing entry without moving it to the head of the list. This order is obtained by adding the (S, G) entry before the (*, G) entry, the latter with NLM_F_REPLACE, as the addition of the source otherwise fails with -EEXIST. The (S, G) entry is then the entry saved by hlist_for_each_entry_safe() and it is freed while the (*, G) entry is processed. The next iteration calls hlist_del() on it again, writing LIST_POISON1 to LIST_POISON2 [1]. Besides device deletion, the flush is also reachable from RTM_DELMDB with NLM_F_BULK. Fix by re-reading the next entry after the remotes were flushed. The current entry cannot be removed by this flush, as source lists can only be configured on (*, G) entries and the removed entries are (S, G) entries. It is therefore still linked and its next pointer reflects the removals. [1] BUG: KASAN: wild-memory-access in vxlan_mdb_entry_put.part.0+0x328/0x588 Write of size 8 at addr dead000000000122 by task ip/327 CPU: 3 UID: 1000 PID: 327 Comm: ip Not tainted 7.2.0-rc7 #2 PREEMPT Call trace: vxlan_mdb_entry_put.part.0+0x328/0x588 vxlan_mdb_flush+0x1d8/0x25c vxlan_mdb_fini+0x8c/0x100 vxlan_uninit+0x1c/0x7c unregister_netdevice_many_notify+0x954/0xd4c rtnl_dellink+0x210/0x530 rtnetlink_rcv_msg+0x434/0x4d0 netlink_rcv_skb+0xc4/0x204 rtnetlink_rcv+0x18/0x24 netlink_unicast+0x4b8/0x548 netlink_sendmsg+0x29c/0x560 ____sys_sendmsg+0x390/0x3ec ___sys_sendmsg+0x114/0x188 __sys_sendmsg+0xf0/0x178 __arm64_sys_sendmsg+0x48/0x60 invoke_syscall.constprop.0+0x58/0x180 el0_svc_common.constprop.0+0x74/0x140 do_el0_svc+0x30/0x40 el0_svc+0x38/0x98 el0t_64_sync_handler+0xa0/0xe4 el0t_64_sync+0x198/0x19c | ||||
| CVE-2026-93252 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix circular locking dependency in ocfs2_init_acl() A lockdep warning indicates a circular locking dependency between `&oi->ip_xattr_sem` and `&journal->j_trans_barrier`: WARNING: possible circular locking dependency detected is trying to acquire lock: (&oi->ip_xattr_sem){++++}-{4:4}, at: ocfs2_init_acl+0x2fd/0x7e0 fs/ocfs2/acl.c:367 but task is already holding lock: (&journal->j_trans_barrier){.+.+}-{4:4}, at: ocfs2_start_trans+0x3ab/0x700 fs/ocfs2/journal.c:369 The deadlock involves two code paths: Path 1 (setxattr) where `ocfs2_xattr_set()` acquires `ip_xattr_sem` (write) and then starts a transaction, which acquires `j_trans_barrier` (read); and Path 2 (mkdir/mknod) where `ocfs2_mknod()` starts a transaction (`j_trans_barrier` read) and then calls `ocfs2_init_acl()`, which attempts to acquire `ip_xattr_sem` (read) on the parent directory to retrieve the default ACL. Because rw_semaphores are subject to writer priority, a pending writer on `j_trans_barrier` (e.g., the journal commit thread) can cause Path 1 to block, while Path 2 is blocked waiting for Path 1 to release `ip_xattr_sem`. The patch fixes the lock ordering by precomputing the ACL state before starting the OCFS2 transaction, while preserving POSIX ACL storage semantics and the existing inode/security initialization order. By reading the parent directory's default ACL and preparing the new inode's ACLs outside the transaction, `ip_xattr_sem` is always acquired before `j_trans_barrier`. `struct ocfs2_acl_state` encapsulates the prepared ACL state, while `ocfs2_acl_init_prepare()` and `ocfs2_acl_init_release()` avoid code duplication between `ocfs2_mknod()` and `ocfs2_init_security_and_acl()`. `ocfs2_calc_xattr_init()` and `ocfs2_init_acl()` use this precomputed state, removing internal `ip_xattr_sem` acquisition and redundant disk reads. Additionally, remove the `ip_xattr_sem` acquisition from `ocfs2_xattr_set_handle()`. This function is only used while initializing a new inode that has not yet been inserted into the inode hash or attached to a dentry, meaning there is no risk of concurrent access and the lock is unnecessary. | ||||
| CVE-2026-93253 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sched/isolation: Defer freeing of cpumask memblock memory to initcall When testing a linux-next kernel with commit 59bd1d914bb5 ("memblock: warn when freeing reserved memory before memory map is initialized"), the following warning was hit when there was a "nohz_full" kernel boot parameter. Cannot free reserved memory because of deferred initialization of the memory map WARNING: mm/memblock.c:904 at __free_reserved_area+0xde/0xf0, CPU#0: swapper/0/0 : Call Trace: <TASK> memblock_phys_free+0xcb/0x100 housekeeping_init+0x14c/0x170 start_kernel+0x207/0x450 x86_64_start_reservations+0x24/0x30 x86_64_start_kernel+0xda/0xe0 common_startup_64+0x13e/0x141 </TASK> IOW, we shouldn't free memblock allocated memory so early in the boot process when memory map isn't fully initialized in deferred_init_memmap(). Fix it by saving the housekeeping cpumask memblock memory to be freed into a llist free list in housekeeping_init() and add a new housekeeping_late_init() helper to defer the actual freeing of memblock memory to when initcall's are being processed. The cpumask memblock memory is treated as a llist_node with the size of a "long" type which is also smallest cpumask size that can be allocated. The non-atomic version of the llist APIs are used as there is no contention. This commit depends on the presence of commit 7c2eee9c1367 ("memblock: don't touch memblock arrays when memblock_free() is called late") to prevent a KASAN UAF bug report [1]. [1] https://lore.kernel.org/lkml/20260505051821.1107133-1-longman@redhat.com/ | ||||
| CVE-2026-93257 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: block: handle nogenerate/noverify properly in fs-integrity Check the BIP_CHECK flags before generating or verifying PI information, otherwise this can be incorrectly called for non-PI metadata and cause generation of incorrect metadata and crashed in the verification handler. The new behavior matches that of the block layer auto-generated metadata. | ||||
| CVE-2026-93259 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/irq: Fix missing r2 clobber in PCREL inline assembly In CONFIG_PPC_KERNEL_PCREL mode, r2 is no longer reserved for the TOC pointer and is available as a caller-saved register [0]. Both call_do_irq() and call_do_softirq() use inline assembly to call functions with stack switching, but fail to list r2 in their clobber lists. This causes the compiler to assume r2 is preserved across these calls, leading to register corruption when the called functions (__do_irq and __do_softirq) clobber r2. As a result of this kernel crash during interrupt handling is seen and the kernel fails to boot: BUG: Unable to handle kernel data access on write at 0xc000000404697638 Faulting instruction address: 0xc0000000000181ec Oops: Kernel access of bad area, sig: 11 [#1] NIP [c0000000000181ec] __do_IRQ+0x6c/0xc0 With older GCC, the compiler would conservatively allocate callee-saved registers (like r31) for values spanning function calls, accidentally avoiding the bug: <__do_IRQ>: 00 00 00 60 nop a6 02 08 7c mflr r0 f8 ff e1 fb std r31,-8(r1) f0 ff c1 fb std r30,-16(r1) 2d 03 10 06 pla r31,53297316 ... 3d e8 ff 4b bl c0000000000165ac <__do_irq> 00 00 21 e8 ld r1,0(r1) 28 00 4d e9 ld r10,40(r13) 40 00 21 38 addi r1,r1,64 2a f9 aa 7f stdx r29,r10,r31 With newer GCC 14, the compiler uses r2 for such values, exposing the missing clobber specification: <__do_IRQ>: 00 00 00 60 nop a6 02 08 7c mflr r0 f0 ff c1 fb std r30,-16(r1) f8 ff e1 fb std r31,-8(r1) 29 02 10 06 pla r2,36252592 # c0000000022aadc0 <__irq_regs> ... 85 dc ff 4b bl c000000000015ee0 <__do_irq> 00 00 21 e8 ld r1,0(r1) 28 00 2d e9 ld r9,40(r13) 30 00 21 38 addi r1,r1,48 2a 11 c9 7f stdx r30,r9,r2 Fix this by adding r2 to the clobber list for both call_do_irq() and call_do_softirq() when CONFIG_PPC_KERNEL_PCREL is enabled. [0]: https://www.mail-archive.com/gcc-patches@gcc.gnu.org/msg313226.html | ||||
| CVE-2026-93260 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/xive: propagate IPI init errors to prevent use-after-free When xive_init_ipis() fails (e.g. irq_domain_alloc_irqs() fails), the error path frees the global xive_ipis array. However, xive_smp_probe() previously ignored this failure and proceeded to call xive_setup_cpu_ipi(), which dereferences the already-freed xive_ipis pointer -- a use-after-free. Now that xive_smp_probe() returns int (previous patch), propagate the error from xive_init_ipis() and xive_setup_cpu_ipi() through xive_smp_probe(). Check the return value in both pnv_smp_probe() and pSeries_smp_probe() so that IPI setup is aborted cleanly on failure, avoiding the use-after-free. | ||||
| CVE-2026-93264 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/efa: Fix PBL chunk length computation On register MR, when creating the PBL, if it's an indirect PBL we create a chunk list to hold the PBL pages pointers. Each chunk is 4KB in size and can hold 510 addresses (EFA_PTRS_PER_CHUNK) and has a 12-byte control buffer at the end of it holding the next chunk's pointer and its length. If the PBL number of pages is a multiple of EFA_PTRS_PER_CHUNK, the calculated last chunk length is wrongly computed as 0, even though that chunk is fully populated with 510 real page pointers. This wrong length is used both to DMA map the chunk and is propagated to the device, causing the device to see the chunk as empty and reject the memory registration. Fix the calculation so it will be performed only if the number of pages isn't a multiple of EFA_PTRS_PER_CHUNK, if it is, its already handled in the above loop correctly. Also prevent out-of-bounds reach in the chunks array in such scenario. | ||||
| CVE-2026-93272 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: qcom_wcnss: Fix handling the lack of PD regulators in v3 The changes introduced to handle single power domain platforms have swapped the info pointer increment from num_pd_vregs to num_pds, which would shift the info pointer past the end of the array for pronto-v3, which does not list power domain regulators in vregs. This showed up as a difference between GCC- and LLVM-compiled kernels on SDM632 devices, where only with LLVM one would get the "regulator request with no identifier" error, because the out-of-bounds memory ended up being zeroed. Fix by skipping the increment when there are more power domains than regulators. | ||||
| CVE-2026-93274 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: bcm2835: Don't remove an unregistered GPIO chip If the devm_pinctrl_register() function fails, bcm2835_pinctrl_probe() calls gpiochip_remove() before gpiochip_add_data() has registered the GPIO chip. This means that upon failure the gpio_chip.gpiodev is NULL resulting in a null pointer dereference inside the gpiochip_remove() function. Remove the unnecessary function call to gpiochip_remove(). No GPIO cleanup is required because the GPIO chip has not yet been registered. Without this change there is potential for a kernel panic upon registration failure | ||||
| CVE-2026-98090 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: restore active device pointers after failed sprout btrfs_init_new_device() switches latest_dev and possibly s_bdev from the seed device to the new sprout device before creating the first writable chunks. If chunk creation or the subsequent sprout setup fails, the error path releases the new device without switching those pointers back. btrfs_show_devname() can then dereference the freed latest_dev and crash. Restore the active device pointers to the latest seed device before removing and releasing the failed sprout device. | ||||
| CVE-2026-98066 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: Fix potential double-free at error path The fix for caiaq driver's resource management to handle the errors tries to release the resources in a common destructor call, but as a sashiko review for another patch suggested, some of the audio resources such as URBs have been already freed, and this may lead to a double-free. For addressing the double-free, call the common destructor function from each place, and assure that the resource pointers get cleared. | ||||
| CVE-2026-98055 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Clean up the bus when fetching ML caps fails snd_hdac_ext_bus_get_ml_capabilities() may fail and its return code shall be checked and accounted for. Address the issue by updating the error-path for avs_pci_probe(). At the same time, if the function in question succeeds but the next part of avs_pci_probe() fails, the hlink list shall be cleaned up before leaving the scope. | ||||
| CVE-2026-98038 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Keep refcount_acquire nullable for borrowed RCU kptrs bpf_refcount_acquire() is fallible for a borrowed reference because the object may have reached a zero refcount. The verifier therefore keeps KF_RET_NULL on the return value unless the argument is an owning reference. An RCU-protected load of a local kptr is marked MEM_ALLOC, but it only receives NON_OWN_REF when the pointee contains a graph node. A refcounted object without a graph node consequently looks like an owning reference even though the loaded register has no acquired reference state. If the program drops the last real reference while remaining in the RCU critical section, refcount_inc_not_zero() returns NULL while the verifier treats the result as non-NULL. Only classify the argument as owning when it is backed by a verifier-tracked reference. This retains the non-NULL return for pointers from bpf_obj_new(), bpf_kptr_xchg(), or an earlier successful acquisition, while requiring a NULL check for borrowed RCU kptrs. [ kkd: Rewrote commit log ] | ||||
| CVE-2026-98009 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: ets: clamp quantum in parse and fallback paths ets_qdisc_change() falls back to psched_mtu() with no floor for bands without an explicit quantum. With a crafted size table qdisc_pkt_len reaches ~2 GiB, so a zero psched_mtu on a headerless device makes the deficit-refill loop spin under the qdisc lock. Move the floor into ets_quantum_parse() so explicitly configured quanta are also clamped to [256, 1<<20], not just the fallback path. Conditions to recreate the bug: CONFIG_NET_SCH_ETS=y. Requires CAP_NET_ADMIN (namespace-local via unshare -Urn suffices). tc qdisc add dev dummy0 root ets bands 3 strict 2 quanta 1 1 | ||||
| CVE-2026-97998 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: cope with concurrent instance destruction Instances are refcounted. However, only memory release happens on the 1 -> 0 transition; the unlink from hashes can occur with any refcount. Uncooperative userspace can force a situation where a queue is pending for destruction from netlink event while a different socket with same portid processes an UNBIND request. With right timing, this will unhash the instance again: Oops: general protection fault, [..] Call Trace: <TASK> nfulnl_recv_config+0x31a/0xd50 nfnetlink_rcv_msg+0x7c2/0xeb0 | ||||