| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Unlimited Elements For Elementor WordPress plugin before 2.0.20 does not perform a capability check on an AJAX action and deserializes attacker-controlled stored data through it, which makes it possible for authenticated attackers with subscriber-level access to inject arbitrary PHP objects. A partial fix in the 2.0.18 to 2.0.19 releases raised the privilege required to reach the vulnerable action to editor-level, and the issue was fully resolved in 2.0.20. |
| LMDeploy is a toolkit for compressing, deploying, and serving large language models. Starting in version 0.9.2 and prior to version 0.16.0, LMDeploy's PyTorch DistServe/PD-disaggregation control plane used `recv_pyobj()` to deserialize messages received through a ZeroMQ PULL socket. PyZMQ implements `recv_pyobj()` using Python pickle deserialization, which can execute arbitrary code while reconstructing an object. The peer address used by the receiver was supplied through the `POST /distserve/p2p_connect` HTTP endpoint. An attacker who could reach an affected DistServe API server could cause the server to connect to an attacker-controlled ZeroMQ endpoint and deserialize a crafted pickle payload. API-key authentication is not enabled unless the operator explicitly configures it. As a result, affected DistServe deployments without API keys allowed unauthenticated remote code execution with the privileges of the LMDeploy serving process. This issue affects the PyTorch backend when PD-disaggregation/DistServe is enabled. Ordinary deployments that do not use the affected disaggregated-serving path do not expose this data flow. The fix was released in LMDeploy 0.16.0. Users who cannot upgrade immediately should prevent untrusted clients from reaching `/distserve/*` endpoints, restrict the DistServe HTTP and ZeroMQ control planes to trusted cluster networks, configure API-key authentication, and block arbitrary outbound ZeroMQ connections from serving nodes. These measures reduce exposure but do not make pickle deserialization safe. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: quiesce input in hid_hw_stop() to prevent use-after-free
A driver's probe calls hid_device_io_start() to enable input delivery,
then fails at a later initialization step and unwinds via hid_hw_stop().
The unwind frees struct hidraw via hidraw_disconnect() while in-flight
HID reports may still be running on another CPU, dereferencing the
freed object through hidraw_report_event(). syzbot reports the
resulting use-after-free for the corsair-psu HID driver.
Edward Adam Davis posted a per-driver fix for corsair-psu that adds
an explicit hid_device_io_stop() before hid_hw_stop() in the probe
error path ("hwmon: prevent packets from going to driver for probe",
2026-04-28). Auditing the tree shows 15 drivers call
hid_device_io_start(); 7 also call hid_device_io_stop() and 8 do not:
drivers calling hid_device_io_start() without a matching
hid_device_io_stop() before hid_hw_stop():
drivers/hwmon/corsair-psu.c (fix posted by Edward)
drivers/hwmon/corsair-cpro.c
drivers/hwmon/nzxt-kraken3.c
drivers/hwmon/nzxt-smart2.c
drivers/hwmon/gigabyte_waterforce.c
drivers/hid/hid-logitech-dj.c
drivers/hid/hid-nintendo.c
drivers/hid/hid-mcp2221.c
Roughly half of all callers of the API are exposed. Centralize the
quiesce in hid_hw_stop() so callers do not have to remember the
matching stop: if a driver has left hdev->io_started true on entry,
call hid_device_io_stop() before hid_disconnect().
For the 7 drivers that already call hid_device_io_stop() correctly,
hdev->io_started is false on entry, the guard short-circuits, and
behavior is unchanged.
No Fixes: tag because the affected drivers gained their
hid_device_io_start() calls independently over years; the bug is a
class-wide API misuse rather than a regression from one commit. |
| A vulnerability in the web-based management interface of Cisco ISE could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. To exploit this vulnerability, the attacker must have at least low-privileged administrative credentials.
This vulnerability is due to insecure deserialization of a user-supplied Java byte stream. An attacker could exploit this vulnerability by sending a crafted serialized Java object to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary code on the device and elevate privileges to root. In single-node deployments, successful exploitation of this vulnerability could cause the affected ISE node to become unavailable, resulting in a denial of service (DoS) condition. In that condition, endpoints that have not already authenticated would be unable to access the network until the node is restored. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) engineering teams have conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20234 are related to insufficiently protected credentials issues that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-522. |
| On affected platforms running Arista EOS with VRRP enabled, the peer device VRRP authentication credentials are logged in cleartext on the switch, allowing an authenticated user with sufficient privileges to view agent trace logs (or a system receiving forwarded log output) to obtain the peer device VRRP authentication credentials without having access to the network segment on which VRRP is running. |
| A vulnerability in Cisco ISE could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. To exploit this vulnerability, the attacker must have valid high-privileged administrative credentials.
This vulnerability is due to insecure deserialization of Java objects by the affected software. An attacker could exploit this vulnerability by sending a crafted serialized Java object to an affected device. A successful exploit could allow the attacker to obtain user-level access to the underlying operating system and then elevate privileges to root. In single-node deployments, successful exploitation of this vulnerability could cause the affected ISE node to become unavailable, resulting in a DoS condition. In that condition, endpoints that have not already authenticated would be unable to access the network until the node is restored. |
| A vulnerability in the External Database Access feature of Cisco Secure Firewall Management Center (FMC) Software could allow an unauthenticated, remote attacker to execute arbitrary commands as root on an affected device.
This vulnerability is due to insecure deserialization of a user-supplied Java byte stream from a host that is configured in the external database access list. An attacker could exploit this vulnerability by sending a crafted, serialized Java byte stream to a specific TCP port of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the device and elevate privileges to root.
Notes:
This vulnerability can be exploited only by an attacker who has control of a host in the external database access list.
If the FMC management interface does not have public internet access, the attack surface that is associated with this vulnerability is reduced. |
| A vulnerability in the sftunnel inter-device communication protocol of Cisco Secure FMC Software could allow an authenticated, remote attacker to obtain root privileges.
This vulnerability is due to unsecured deserialization of untrusted data over the sftunnel management connection. An attacker could exploit this vulnerability by sending crafted sftunnel remote procedure calls (RPCs). A successful exploit could allow the attacker to gain root privileges on a device that is running Cisco Secure FMC Software and its high-availability peer.
To exploit this vulnerability, the attacker must have valid administrative credentials on a managed Cisco FTD device. |
| A vulnerability in Cisco Secure FMC Software could allow an authenticated, remote attacker to execute arbitrary commands at the root privilege level.
This vulnerability is due to unsecured deserialization of web-management user-controlled data. An attacker could exploit this vulnerability by authenticating to the device and sending a crafted HTTP payload. A successful exploit could allow the attacker to save the crafted payload and then execute it on the underlying operating system as root.
To exploit this vulnerability, the attacker must have valid credentials for a user account with at least the role of Security Analyst (read-only). |
| HCL BigFix Service Management is affected by an Administrative Session Concurrency vulnerability. The application allows multiple simultaneous authenticated sessions for the same administrative account, which could enable an unauthorized attacker to predict or hijack valid session identifiers. Successful exploitation allows an attacker to compromise affected administrative sessions and execute actions with full privileged user permissions. |
| The ShortPixel Image Optimizer – Optimize Images, Convert WebP & AVIF plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 6.5.5 via deserialization of untrusted input . This makes it possible for authenticated attackers, with author-level access and above, to inject a PHP Object. No known POP chain is present in the vulnerable software, which means this vulnerability has no impact unless another plugin or theme containing a POP chain is installed on the site. If a POP chain is present via an additional plugin or theme installed on the target system, it may allow the attacker to perform actions like delete arbitrary files, retrieve sensitive data, or execute code depending on the POP chain present. |
| The OAKlouds developed by HGiga has a Insecure Deserialization vulnerability. Unauthenticated remote attackers can execute arbitrary code on the server by sending maliciously crafted serialized content. |
| AVideo through 29.0 contains an information disclosure vulnerability in restreamsActive.json.php that allows authenticated streamers to enumerate source stream keys and identities of all other streamers' active restreams. The endpoint fails to filter results by user ownership, exposing sensitive transmission credentials and streamer identity across all accounts to any user with streaming capability. |
| ImageMagick before 7.1.2-30 and 6.9.13-55 contains a time-of-check-time-of-use (TOCTOU) vulnerability in the video decoder that allows attackers to bypass path policy write restrictions via symlink swaps. An attacker can replace a symlink between policy validation (check-time) and the file write operation (use-time) to write to policy-denied locations. |
| A vulnerability in Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) could allow an authenticated, remote attacker to conduct an SQL or HQL injection attack on an affected device.
This vulnerability is due to insufficient validation of user-supplied input to the affected APIs before it is used to build database queries. An attacker could exploit this vulnerability by sending a crafted request to an affected device. A successful exploit could allow the attacker to execute arbitrary SQL or HQL queries against the underlying database, which could allow the attacker to view or modify data that they are not authorized to access. To exploit this vulnerability, the attacker must have valid administrative credentials. |
| Netis NX10 firmware V4.0.1.5808 and V3.0.0.4142 contain an information disclosure vulnerability that allows unauthenticated attackers to retrieve the administrator password by sending a request to the sysinfo action in the web management interface without a valid session. Attackers can replay the exposed credential against the login handler to establish a fully authenticated administrator session on the device. |
| IBM WebSphere Application Server 9.0 and 8.5 is affected by a deserialization vulnerability in the Name Service component. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: sd: Fix error handling in sd_probe() after large pool creation failure
After device_add(&sdkp->disk_dev) succeeds, sd_large_pool_create()
failure must unregister disk_dev and let scsi_disk_release() free
sdkp. Going through out_free_index kfree()s an already registered device
and leaks the sysfs entry. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: fix RX data queuing of RRO 3.0
For RRO 3.0, RX data released from a RRO data queue should be put to
the indicator queue. The frames are processed and completed in the
context of the indicator queue NAPI, which only polls skbs queued on
the MT_RXQ_RRO_IND list; frames queued under the data queue id are
left sitting on that list until the data queue NAPI happens to run,
stalling and reordering RX data. |
