Description
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Serialize concurrent connect calls
iso_sock_connect() checks the socket state before taking the socket lock
and drops the lock again before setting up a connection. Two callers can
both pass the admission check while the socket is open or bound.
Caller A can copy its destination for route selection, then caller B can
replace the socket destination before A binds or connects the CIS. A
then uses B's destination with the route selected for its own request.
B can also proceed after A attaches a connection and sets BT_CONNECT.
For deferred BIS setup, B can bind a second BIS and overwrite
iso_pi(sk)->conn, leaving the first connection's reference and conn->sk
back-pointer stranded. Concurrent CIS connects can likewise replace the
socket's connection. Later teardown only detaches the current connection,
so a callback on the old connection can race with socket release and
access a freed socket.
KASAN reported:
BUG: KASAN: slab-use-after-free in iso_sock_hold+0xf7/0x1b0
Call Trace:
iso_sock_hold+0xf7/0x1b0
iso_conn_del+0x7b/0x1d0
iso_connect_cfm+0x186/0x16a0
hci_conn_failed+0x154/0x280
hci_abort_conn_sync+0x3dc/0x7d0
hci_cmd_sync_work+0x173/0x300
Allocated by task 121:
sk_alloc+0x2b/0x6d0
bt_sock_alloc+0x29/0x370
iso_sock_alloc.constprop.0+0x19/0x300
iso_sock_create+0x94/0x100
Freed by task 121:
kfree+0x121/0x3c0
__sk_destruct+0x42b/0x540
iso_sock_release+0x29d/0x340
__sock_release+0xa1/0x260
Check admission under the socket lock and mark the connect operation in
progress before publishing its destination. Keep that flag set across
route lookup and connection setup, rejecting another connect with
-EBADFD before it can change the destination or attach a connection.
Clear the flag after either helper returns, including on failure, so a
failed setup can be retried.
A separate flag is needed because the socket lock must be released before
acquiring the HCI device lock, while BT_CONNECT requires an attached
connection. Keep the existing state transitions and the deferred CIS
completion through iso_sock_recvmsg().
Reject an existing socket attachment in __iso_chan_add() before taking
a new reference or publishing either pointer, so every caller preserves
the connection association. Keep the same-socket, same-connection success
case for deferred CIS setup. Reject an attached socket before BIS setup
so a reusable BIS is not claimed before the attachment is rejected.
In CIS setup, reject a different HCI connection before iso_conn_add()
and drop the per-attempt HCI hold directly. An unowned iso_conn may still
carry another reference after detachment, so its destruction cannot be
relied on to release that hold.
iso_listen_bis() creates a fresh PA HCI/ISO pair under the device lock,
so the temporary iso_conn_put() frees the ISO candidate and drops its
HCI hold on rejection. iso_conn_ready() uses a freshly allocated,
unpublished child with no connection, making the socket-side rejection
unreachable.
Bluetooth: ISO: Serialize concurrent connect calls
iso_sock_connect() checks the socket state before taking the socket lock
and drops the lock again before setting up a connection. Two callers can
both pass the admission check while the socket is open or bound.
Caller A can copy its destination for route selection, then caller B can
replace the socket destination before A binds or connects the CIS. A
then uses B's destination with the route selected for its own request.
B can also proceed after A attaches a connection and sets BT_CONNECT.
For deferred BIS setup, B can bind a second BIS and overwrite
iso_pi(sk)->conn, leaving the first connection's reference and conn->sk
back-pointer stranded. Concurrent CIS connects can likewise replace the
socket's connection. Later teardown only detaches the current connection,
so a callback on the old connection can race with socket release and
access a freed socket.
KASAN reported:
BUG: KASAN: slab-use-after-free in iso_sock_hold+0xf7/0x1b0
Call Trace:
iso_sock_hold+0xf7/0x1b0
iso_conn_del+0x7b/0x1d0
iso_connect_cfm+0x186/0x16a0
hci_conn_failed+0x154/0x280
hci_abort_conn_sync+0x3dc/0x7d0
hci_cmd_sync_work+0x173/0x300
Allocated by task 121:
sk_alloc+0x2b/0x6d0
bt_sock_alloc+0x29/0x370
iso_sock_alloc.constprop.0+0x19/0x300
iso_sock_create+0x94/0x100
Freed by task 121:
kfree+0x121/0x3c0
__sk_destruct+0x42b/0x540
iso_sock_release+0x29d/0x340
__sock_release+0xa1/0x260
Check admission under the socket lock and mark the connect operation in
progress before publishing its destination. Keep that flag set across
route lookup and connection setup, rejecting another connect with
-EBADFD before it can change the destination or attach a connection.
Clear the flag after either helper returns, including on failure, so a
failed setup can be retried.
A separate flag is needed because the socket lock must be released before
acquiring the HCI device lock, while BT_CONNECT requires an attached
connection. Keep the existing state transitions and the deferred CIS
completion through iso_sock_recvmsg().
Reject an existing socket attachment in __iso_chan_add() before taking
a new reference or publishing either pointer, so every caller preserves
the connection association. Keep the same-socket, same-connection success
case for deferred CIS setup. Reject an attached socket before BIS setup
so a reusable BIS is not claimed before the attachment is rejected.
In CIS setup, reject a different HCI connection before iso_conn_add()
and drop the per-attempt HCI hold directly. An unowned iso_conn may still
carry another reference after detachment, so its destruction cannot be
relied on to release that hold.
iso_listen_bis() creates a fresh PA HCI/ISO pair under the device lock,
so the temporary iso_conn_put() frees the ISO candidate and drops its
HCI hold on rejection. iso_conn_ready() uses a freshly allocated,
unpublished child with no connection, making the socket-side rejection
unreachable.
Published:
2026-10-23
Score:
n/a
EPSS:
n/a
KEV:
No
Impact:
n/a
Action:
n/a
Analysis
Analysis and contextual insights are available on OpenCVE Cloud.
Default status is the baseline for the product, each version can override it (e.g. patched versions marked unaffected).
| Vendor | Product | Default status | Versions | ||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Linux | Linux | unaffected |
|
||||||||||||||||||||||||
| Linux | Linux | affected |
|
No data.
No data.
No data available yet.
Remediation
No vendor fix or workaround currently provided.
Additional remediation guidance may be available on OpenCVE Cloud.
Tracking
Sign in to view the affected projects.
Advisories
No advisories yet.
References
History
Fri, 23 Oct 2026 12:45:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Description | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Serialize concurrent connect calls iso_sock_connect() checks the socket state before taking the socket lock and drops the lock again before setting up a connection. Two callers can both pass the admission check while the socket is open or bound. Caller A can copy its destination for route selection, then caller B can replace the socket destination before A binds or connects the CIS. A then uses B's destination with the route selected for its own request. B can also proceed after A attaches a connection and sets BT_CONNECT. For deferred BIS setup, B can bind a second BIS and overwrite iso_pi(sk)->conn, leaving the first connection's reference and conn->sk back-pointer stranded. Concurrent CIS connects can likewise replace the socket's connection. Later teardown only detaches the current connection, so a callback on the old connection can race with socket release and access a freed socket. KASAN reported: BUG: KASAN: slab-use-after-free in iso_sock_hold+0xf7/0x1b0 Call Trace: iso_sock_hold+0xf7/0x1b0 iso_conn_del+0x7b/0x1d0 iso_connect_cfm+0x186/0x16a0 hci_conn_failed+0x154/0x280 hci_abort_conn_sync+0x3dc/0x7d0 hci_cmd_sync_work+0x173/0x300 Allocated by task 121: sk_alloc+0x2b/0x6d0 bt_sock_alloc+0x29/0x370 iso_sock_alloc.constprop.0+0x19/0x300 iso_sock_create+0x94/0x100 Freed by task 121: kfree+0x121/0x3c0 __sk_destruct+0x42b/0x540 iso_sock_release+0x29d/0x340 __sock_release+0xa1/0x260 Check admission under the socket lock and mark the connect operation in progress before publishing its destination. Keep that flag set across route lookup and connection setup, rejecting another connect with -EBADFD before it can change the destination or attach a connection. Clear the flag after either helper returns, including on failure, so a failed setup can be retried. A separate flag is needed because the socket lock must be released before acquiring the HCI device lock, while BT_CONNECT requires an attached connection. Keep the existing state transitions and the deferred CIS completion through iso_sock_recvmsg(). Reject an existing socket attachment in __iso_chan_add() before taking a new reference or publishing either pointer, so every caller preserves the connection association. Keep the same-socket, same-connection success case for deferred CIS setup. Reject an attached socket before BIS setup so a reusable BIS is not claimed before the attachment is rejected. In CIS setup, reject a different HCI connection before iso_conn_add() and drop the per-attempt HCI hold directly. An unowned iso_conn may still carry another reference after detachment, so its destruction cannot be relied on to release that hold. iso_listen_bis() creates a fresh PA HCI/ISO pair under the device lock, so the temporary iso_conn_put() frees the ISO candidate and drops its HCI hold on rejection. iso_conn_ready() uses a freshly allocated, unpublished child with no connection, making the socket-side rejection unreachable. | |
| Title | Bluetooth: ISO: Serialize concurrent connect calls | |
| First Time appeared |
Linux
Linux linux Kernel |
|
| CPEs | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* | |
| Vendors & Products |
Linux
Linux linux Kernel |
|
| References |
|
|
MITRE
Status: PUBLISHED
Assigner: Linux
Published:
Updated: 2026-10-23T12:20:37.472Z
Reserved: 2026-09-25T10:25:14.385Z
Link: CVE-2026-99012
Vulnrichment
No data.
NVD
Status : Received
Published: 2026-10-23T13:17:23.867
Modified: 2026-10-23T13:17:23.867
Link: CVE-2026-99012
Redhat
No data.
OpenCVE Enrichment
No data.
Weaknesses
No weakness.